Al 2 O 3 hollow nanospheres prepared by fluidized bed chemical vapor deposition and further heat treatment
- 21 June 2019
- journal article
- research article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 102 (11) , 6463-6468
Abstract
Hollow‐structured Al 2 O 3 nanospheres were prepared by chemical vapor deposition (CVD) and further heat‐treatment process. For the CVD process, a unique cooling gas loop was designed in the precursor delivery system and amorphous Al 2 O 3 nanospheres with incomplete pyrolysis intermediated products were obtained in a vertical fluidized bed at 500℃. The microstructure of the nanospheres tended to hollow after subsequent heat treatment at 1300℃ in air. It was found that the obtained Al 2 O 3 hollow nanospheres showed a size of 100‐450 nm in diameter and 20‐80 nm in shell thickness. Transmission electron microscopy (TEM) and X‐ray diffraction (XRD) analysis confirmed that the Al 2 O 3 hollow nanospheres were α‐Al 2 O 3 . The possible formation mechanism was proposed based on the results of the thermal gravimetric (TG) measurement connected with a Fourier transform infrared spectrometry (FTIR). The novel method to prepare Al 2 O 3 hollow nanospheres can inspire ideas for the design and synthesis of other hollow‐structured nanospheres.Keywords
Funding Information
- National Natural Science Foundation of China (21771116, 91634113)
This publication has 23 references indexed in Scilit:
- Preparation of hollow alumina nanospheres via surfactant-assisted flame spray pyrolysisParticuology, 2011
- CVD Growth of Carbon Nanotubes and Nanofibers: Big Length and Constant DiameterMacromolecular Symposia, 2010
- A Novel Technique for Synthesizing Nanoshell Hollow Alumina ParticlesJournal of the American Ceramic Society, 2009
- Hollow Micro‐/Nanostructures: Synthesis and ApplicationsAdvanced Materials, 2008
- Spray Pyrolysis Synthesis and Dielectric Properties of Pb(Mg 1/3 Nb 2/3 )O 3Journal of the American Ceramic Society, 2008
- Preparation and Formation Mechanism of Alumina Hollow Nanospheres via High-Speed Jet Flame CombustionIndustrial & Engineering Chemistry Research, 2007
- Hollow Al2O3 Microspheres Derived from Al/AlOOH·nH2O Core‐Shell ParticlesJournal of the American Ceramic Society, 2005
- Effect of Core Materials on the Formation of Hollow Alumina Microspheres by Mechanofusion ProcessJournal of the American Ceramic Society, 2004
- Chemical vapour deposition of coatingsProgress in Materials Science, 2003
- Corrundum (α-Al2O3) by XPSSurface Science Spectra, 1998