A Control Program for Hydropower Operation Based on Minimizing the Principal Stress Values on the Dam Body: Mosul Dam Case Study
Open Access
- 1 June 2023
- journal article
- research article
- Published by Journal of Engineering in Journal of Engineering
- Vol. 29 (6) , 30-45
Abstract
This study examines the vibrations produced by hydropower operations to improve embankment dam safety. This study consists of two parts: In the first part, ANSYS-CFX was used to generate a three-dimensional (3-D) finite volume (FV) model to simulate a vertical Francis turbine unit in the Mosul hydropower plant. The pressure pattern result of the turbine model was transformed into the dam body to show how the turbine unit's operation affects the dam's stability. The upstream reservoir conditions, various flow rates, and fully open inlet gates were considered. In the second part of this study, a 3-D FE Mosul dam model was simulated using an ANSYS program. The operational turbine model's water pressure pattern is conveyed to the dam's turbine-shared zone. The maximal and minimal upstream reservoir water levels were investigated. A control program was created depending on the principle stress model results collected from the operation of the hydropower plant with the minimum principal stress on the dam body. This research suggests an enhanced turbine operating system, reducing stress on the dam body and increasing dam operation life.Keywords
This publication has 10 references indexed in Scilit:
- Rotatory 3D structured mesh study using openFOAM to simulate the flow in francis turbineMaterials Today: Proceedings, 2022
- Cavitation Draft Tube Analysis of Francis Turbine Loads Variations: A Case Study from Cirata Hydropower PlantIOP Conference Series: Materials Science and Engineering, 2021
- A Computational Fluid Dynamics Investigation of using Large-Scale Geometric Roughness Elements in Open ChannelsJournal of Engineering, 2021
- Derivation of cavitation characteristics of a 3MW prototype Francis turbine through numerical hydrodynamic analysisMaterials Today: Proceedings, 2020
- A Systematic Operation Program of a Hydropower Plant Based on Minimizing the Principal Stress: Haditha Dam Case StudyWater, 2018
- Minimizing the Principle Stresses of Powerhoused Rock-Fill Dams Using Control Turbine Running Units: Application of Finite Element MethodWater, 2018
- Water Flow Stabilization Using Submerged Weir for Draft Tube Reaction Hydraulic TurbineScientia Iranica, 2018
- Simulations of Steady Cavitating Flow in a Small Francis TurbineInternational Journal of Rotating Machinery, 2016
- Dynamic Analysis of Fluid – Structure Interaction of Axial Fan SystemJournal of Engineering, 2015
- Numerical Simulation of 3D Cavitating Turbulent Flow in Francis Turbine2005