Ameen Mohammed Salih Ameen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Ameen Mohammed Salih Ameen has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Nadhir Al-Ansari
Luleå University of Technology, Luleå, Sweden
5 shared publications - Zaher Mundher Yaseen
Civil and Environmental Engineering Department, King Fahd University of Petroleum & Minerals, Dhahran, 31261, Saudi Arabia
4 shared publications - Ali Omran Al-Sulttani
Department of Water Resources Engineering, University of Baghdad, Baghdad, Iraq
2 shared publications - Faridah Othman
Department of Civil Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur, Malaysia
2 shared publications - Hussain Ali Al-Fatlawi
Department of Water Resources Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq
2 shared publications - Tao Hai
Artificial Intelligence Research Center (AIRC), Ajman University, Ajman, United Arab Emirates
2 shared publications
Latest Publications
- Open Access
- 1 November 2025
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1545 (1)
Improving the Hydraulic Performance of Bani-Hassan Canal by Using Submerged Weir
A submerged weir is a hydraulic structure utilized to control flow in canals and rivers. Water scarcity is a persistent issue in Iraq, especially during the dry season when irrigation withdrawals reduce downstream water levels in canals (Water is lost from irrigation canals due to seepage, evaporation, and vegetation growth). The final section of the Bani Hassan Canal experiences significant drops in water surface (WS) levels, negatively impacting irrigation efficiency. This study addresses that gap by investigating the use of submerged weirs to enhance water distribution and raise WS in the final 6 km segment of the canal. A one-dimensional (1D) hydraulic model was developed using HEC-RAS 6.6 under steady-state conditions to simulate flow behavior. Simulations were performed for two scenarios: a dry season discharge of 20 m 3 /s and a design discharge of 39 m 3 /s. The comparison of simulated water surface profiles under these two scenarios allowed the validation of the model and assessment of hydraulic performance. Submerged weirs of varying heights (0.5 m to 2.0 m) were introduced at station 63.5 to evaluate their effect on raising the water surface level. Results showed that a 2.0 m submerged weir increased the water level at station 62 by 0.82 m during low-flow conditions-effectively restoring it to the design level. These findings confirm that submerged weirs are an effective and practical solution for improving water distribution and sustaining irrigation during periods of water scarcity.
- 1 November 2025
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1545 (1)
Open AccessImproving the Hydraulic Performance of Bani-Hassan Canal by Using Submerged Weir
A submerged weir is a hydraulic structure utilized to control flow in canals and rivers. Water scarcity is a persistent issue in Iraq, especially during the dry season when irrigation withdrawals reduce downstream water levels in canals (Water is lost from irrigation canals due to seepage, evaporation, and vegetation growth). The final section of the Bani Hassan Canal experiences significant drops in water surface (WS) levels, negatively impacting irrigation efficiency. This study addresses that gap by investigating the use of submerged weirs to enhance water distribution and raise WS in the final 6 km segment of the canal. A one-dimensional (1D) hydraulic model was developed using HEC-RAS 6.6 under steady-state conditions to simulate flow behavior. Simulations were performed for two scenarios: a dry season discharge of 20 m 3 /s and a design discharge of 39 m 3 /s. The comparison of simulated water surface profiles under these two scenarios allowed the validation of the model and assessment of hydraulic performance. Submerged weirs of varying heights (0.5 m to 2.0 m) were introduced at station 63.5 to evaluate their effect on raising the water surface level. Results showed that a 2.0 m submerged weir increased the water level at station 62 by 0.82 m during low-flow conditions-effectively restoring it to the design level. These findings confirm that submerged weirs are an effective and practical solution for improving water distribution and sustaining irrigation during periods of water scarcity.
- Open Access
- 1 August 2024
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1374 (1) , 012001
Behaviour of liquefaction for Darbandikhan Dam consequence impact of seismic load
Embankment dams are at risk of damage due to the impact of earthquakes. Rock-filled dam structures are especially vulnerable to earthquakes. To assess the impact of earthquakes, it is important to study liquefaction, which is a significant factor affecting the dynamic behavior of the dams. This study aims to determine the probability that the Darbandikhan rock-fill dam on the (Sirwan- Diyala) river in Iraq may liquefy using two-dimensional numerical modelling and finite element analysis, which is located in Alsulamaniyah north of the capital of Iraq, Baghdad 230 km. The simulation results are compared in terms of different water levels 434, 472, and 485m.a.s.l., different peak accelerations of the earthquakes (0.02, 0.04, 0.06 and 0.08) and different duration of earthquakes 25, 50, 75, and 100sec. As, a result the liquefaction zone increases with increasing upstream water level, acceleration, and duration. So, when the maximum operation water level was 485 m, the percentage of liquefaction area was 20% at peak acceleration of 0.08 g, and a duration of 100s. After that, the liquefaction zone decreases with a decreasing upstream water level of 472 m, for the same acceleration and duration of up to 12.5%. However, this percentage when the minimum water level of 434 m, acceleration 0.08g, and duration 100s, decreases by 65% from the liquefaction zone at elevation 485 m.a.s.l.
- 1 August 2024
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1374 (1) , 012001
Open AccessBehaviour of liquefaction for Darbandikhan Dam consequence impact of seismic load
Embankment dams are at risk of damage due to the impact of earthquakes. Rock-filled dam structures are especially vulnerable to earthquakes. To assess the impact of earthquakes, it is important to study liquefaction, which is a significant factor affecting the dynamic behavior of the dams. This study aims to determine the probability that the Darbandikhan rock-fill dam on the (Sirwan- Diyala) river in Iraq may liquefy using two-dimensional numerical modelling and finite element analysis, which is located in Alsulamaniyah north of the capital of Iraq, Baghdad 230 km. The simulation results are compared in terms of different water levels 434, 472, and 485m.a.s.l., different peak accelerations of the earthquakes (0.02, 0.04, 0.06 and 0.08) and different duration of earthquakes 25, 50, 75, and 100sec. As, a result the liquefaction zone increases with increasing upstream water level, acceleration, and duration. So, when the maximum operation water level was 485 m, the percentage of liquefaction area was 20% at peak acceleration of 0.08 g, and a duration of 100s. After that, the liquefaction zone decreases with a decreasing upstream water level of 472 m, for the same acceleration and duration of up to 12.5%. However, this percentage when the minimum water level of 434 m, acceleration 0.08g, and duration 100s, decreases by 65% from the liquefaction zone at elevation 485 m.a.s.l.
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3203 (1) , 020028
Improving the hydraulic performance of francis turbines by minimizing pressure fluctuation in the turbine draft tubes
Unites of Francis turbine Mosel dam include; the inlet, penstock, turbine runner, draft tube, and outlets. The draft tube is influenced by the pressure fluctuat Unites of Francis turbine Mosel dam include; the inlet, penstock, turbine runner, draft tube, and outlets. The draft tube is influenced by the pressure fluctuat
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3203 (1) , 020028
Improving the hydraulic performance of francis turbines by minimizing pressure fluctuation in the turbine draft tubes
Unites of Francis turbine Mosel dam include; the inlet, penstock, turbine runner, draft tube, and outlets. The draft tube is influenced by the pressure fluctuat Unites of Francis turbine Mosel dam include; the inlet, penstock, turbine runner, draft tube, and outlets. The draft tube is influenced by the pressure fluctuat
- Open Access
- 1 June 2023
- Published by Journal of Engineering in Journal of Engineering
- Vol. 29 (6) , 30-45
A Control Program for Hydropower Operation Based on Minimizing the Principal Stress Values on the Dam Body: Mosul Dam Case Study
This study examines the vibrations produced by hydropower operations to improve embankment dam safety. This study consists of two parts: In the first part, ANSYS-CFX was used to generate a three-dimensional (3-D) finite volume (FV) model to simulate a vertical Francis turbine unit in the Mosul hydropower plant. The pressure pattern result of the turbine model was transformed into the dam body to show how the turbine unit's operation affects the dam's stability. The upstream reservoir conditions, various flow rates, and fully open inlet gates were considered. In the second part of this study, a 3-D FE Mosul dam model was simulated using an ANSYS program. The operational turbine model's water pressure pattern is conveyed to the dam's turbine-shared zone. The maximal and minimal upstream reservoir water levels were investigated. A control program was created depending on the principle stress model results collected from the operation of the hydropower plant with the minimum principal stress on the dam body. This research suggests an enhanced turbine operating system, reducing stress on the dam body and increasing dam operation life.
- 1 June 2023
- Published by Journal of Engineering in Journal of Engineering
- Vol. 29 (6) , 30-45
Open AccessA Control Program for Hydropower Operation Based on Minimizing the Principal Stress Values on the Dam Body: Mosul Dam Case Study
This study examines the vibrations produced by hydropower operations to improve embankment dam safety. This study consists of two parts: In the first part, ANSYS-CFX was used to generate a three-dimensional (3-D) finite volume (FV) model to simulate a vertical Francis turbine unit in the Mosul hydropower plant. The pressure pattern result of the turbine model was transformed into the dam body to show how the turbine unit's operation affects the dam's stability. The upstream reservoir conditions, various flow rates, and fully open inlet gates were considered. In the second part of this study, a 3-D FE Mosul dam model was simulated using an ANSYS program. The operational turbine model's water pressure pattern is conveyed to the dam's turbine-shared zone. The maximal and minimal upstream reservoir water levels were investigated. A control program was created depending on the principle stress model results collected from the operation of the hydropower plant with the minimum principal stress on the dam body. This research suggests an enhanced turbine operating system, reducing stress on the dam body and increasing dam operation life.
- Open Access
- 29 October 2020
- Published by Wiley in Complexity
- Vol. 2020, 1-22
Training and Testing Data Division Influence on Hybrid Machine Learning Model Process: Application of River Flow Forecasting
The hydrological process has a dynamic nature characterised by randomness and complex phenomena. The application of machine learning (ML) models in forecasting river flow has grown rapidly. This is owing to their capacity to simulate the complex phenomena associated with hydrological and environmental processes. Four different ML models were developed for river flow forecasting located in semiarid region, Iraq. The effectiveness of data division influence on the ML models process was investigated. Three data division modeling scenarios were inspected including 70%–30%, 80%–20, and 90%–10%. Several statistical indicators are computed to verify the performance of the models. The results revealed the potential of the hybridized support vector regression model with a genetic algorithm (SVR-GA) over the other ML forecasting models for monthly river flow forecasting using 90%–10% data division. In addition, it was found to improve the accuracy in forecasting high flow events. The unique architecture of developed SVR-GA due to the ability of the GA optimizer to tune the internal parameters of the SVR model provides a robust learning process. This has made it more efficient in forecasting stochastic river flow behaviour compared to the other developed hybrid models.
- 29 October 2020
- Published by Wiley in Complexity
- Vol. 2020, 1-22
Open AccessTraining and Testing Data Division Influence on Hybrid Machine Learning Model Process: Application of River Flow Forecasting
The hydrological process has a dynamic nature characterised by randomness and complex phenomena. The application of machine learning (ML) models in forecasting river flow has grown rapidly. This is owing to their capacity to simulate the complex phenomena associated with hydrological and environmental processes. Four different ML models were developed for river flow forecasting located in semiarid region, Iraq. The effectiveness of data division influence on the ML models process was investigated. Three data division modeling scenarios were inspected including 70%–30%, 80%–20, and 90%–10%. Several statistical indicators are computed to verify the performance of the models. The results revealed the potential of the hybridized support vector regression model with a genetic algorithm (SVR-GA) over the other ML forecasting models for monthly river flow forecasting using 90%–10% data division. In addition, it was found to improve the accuracy in forecasting high flow events. The unique architecture of developed SVR-GA due to the ability of the GA optimizer to tune the internal parameters of the SVR model provides a robust learning process. This has made it more efficient in forecasting stochastic river flow behaviour compared to the other developed hybrid models.
- Open Access
- 24 February 2020
- Published by MDPI AG in Sustainability
- Vol. 12 (4) , 1676
State-of-the Art-Powerhouse, Dam Structure, and Turbine Operation and Vibrations
Dam and powerhouse operation sustainability is a major concern from the hydraulic engineering perspective. Powerhouse operation is one of the main sources of vibrations in the dam structure and hydropower plant; thus, the evaluation of turbine performance at different water pressures is important for determining the sustainability of the dam body. Draft tube turbines run under high pressure and suffer from connection problems, such as vibrations and pressure fluctuation. Reducing the pressure fluctuation and minimizing the principal stress caused by undesired components of water in the draft tube turbine are ongoing problems that must be resolved. Here, we conducted a comprehensive review of studies performed on dams, powerhouses, and turbine vibration, focusing on the vibration of two turbine units: Kaplan and Francis turbine units. The survey covered several aspects of dam types (e.g., rock and concrete dams), powerhouse analysis, turbine vibrations, and the relationship between dam and hydropower plant sustainability and operation. The current review covers the related research on the fluid mechanism in turbine units of hydropower plants, providing a perspective on better control of vibrations. Thus, the risks and failures can be better managed and reduced, which in turn will reduce hydropower plant operation costs and simultaneously increase the economical sustainability. Several research gaps were found, and the literature was assessed to provide more insightful details on the studies surveyed. Numerous future research directions are recommended.
- 24 February 2020
- Published by MDPI AG in Sustainability
- Vol. 12 (4) , 1676
Open AccessState-of-the Art-Powerhouse, Dam Structure, and Turbine Operation and Vibrations
Dam and powerhouse operation sustainability is a major concern from the hydraulic engineering perspective. Powerhouse operation is one of the main sources of vibrations in the dam structure and hydropower plant; thus, the evaluation of turbine performance at different water pressures is important for determining the sustainability of the dam body. Draft tube turbines run under high pressure and suffer from connection problems, such as vibrations and pressure fluctuation. Reducing the pressure fluctuation and minimizing the principal stress caused by undesired components of water in the draft tube turbine are ongoing problems that must be resolved. Here, we conducted a comprehensive review of studies performed on dams, powerhouses, and turbine vibration, focusing on the vibration of two turbine units: Kaplan and Francis turbine units. The survey covered several aspects of dam types (e.g., rock and concrete dams), powerhouse analysis, turbine vibrations, and the relationship between dam and hydropower plant sustainability and operation. The current review covers the related research on the fluid mechanism in turbine units of hydropower plants, providing a perspective on better control of vibrations. Thus, the risks and failures can be better managed and reduced, which in turn will reduce hydropower plant operation costs and simultaneously increase the economical sustainability. Several research gaps were found, and the literature was assessed to provide more insightful details on the studies surveyed. Numerous future research directions are recommended.
- Open Access
- 5 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 74471-74481
Implementation of Univariate Paradigm for Streamflow Simulation Using Hybrid Data-Driven Model: Case Study in Tropical Region
The performance of the bio-inspired adaptive neuro-fuzzy inference system (ANFIS) models are proposed for forecasting highly non-linear streamflow of Pahang River, located in a tropical climatic region of Peninsular Malaysia. Three different bio-inspired optimization algorithms namely particle swarm optimization (PSO), genetic algorithm (GA), and differential evolution (DE) were individually used to tune the membership function of ANFIS model in order to improve the capability of streamflow forecasting. Different combination of antecedent streamflow was used to develop the forecasting models. The performance of the models was evaluated using a number of metrics including mean absolute error (MAE), root mean square error (RMSE), coefficient of determination (R2) and Willmott’s Index (WI) statistics. The results revealed that increasing number of inputs has a positive impact on the forecasting ability of both ANFIS and hybrid ANFIS models. The comparison of the performance of three optimization methods indicated PSO improved the capability of ANFIS model (RMSE=7.96; MAE=2.34; R2=0.998 and WI=0.994) more compared to GA and DE in forecasting streamflow. The uncertainty band of ANFIS-PSO forecast was also found the lowest (±0.217), which indicates that ANFIS-PSO model can be used for reliable forecasting of highly stochastic river flow in tropical environment.
- 5 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 74471-74481
Open AccessImplementation of Univariate Paradigm for Streamflow Simulation Using Hybrid Data-Driven Model: Case Study in Tropical Region
The performance of the bio-inspired adaptive neuro-fuzzy inference system (ANFIS) models are proposed for forecasting highly non-linear streamflow of Pahang River, located in a tropical climatic region of Peninsular Malaysia. Three different bio-inspired optimization algorithms namely particle swarm optimization (PSO), genetic algorithm (GA), and differential evolution (DE) were individually used to tune the membership function of ANFIS model in order to improve the capability of streamflow forecasting. Different combination of antecedent streamflow was used to develop the forecasting models. The performance of the models was evaluated using a number of metrics including mean absolute error (MAE), root mean square error (RMSE), coefficient of determination (R2) and Willmott’s Index (WI) statistics. The results revealed that increasing number of inputs has a positive impact on the forecasting ability of both ANFIS and hybrid ANFIS models. The comparison of the performance of three optimization methods indicated PSO improved the capability of ANFIS model (RMSE=7.96; MAE=2.34; R2=0.998 and WI=0.994) more compared to GA and DE in forecasting streamflow. The uncertainty band of ANFIS-PSO forecast was also found the lowest (±0.217), which indicates that ANFIS-PSO model can be used for reliable forecasting of highly stochastic river flow in tropical environment.
- Open Access
A Systematic Operation Program of a Hydropower Plant Based on Minimizing the Principal Stress: Haditha Dam Case Study
Dam operation and management have become more complex recently because of the need for considering hydraulic structure sustainability and environmental protect on. An Earthfill dam that includes a powerhouse system is considered as a significant multipurpose hydraulic structure. Understanding the effects of running hydropower plant turbines on the dam body is one of the major safety concerns for earthfill dams. In this research, dynamic analysis of earthfill dam, integrated with a hydropower plant system containing six vertical Kaplan turbines (i.e., Haditha dam), is investigated. In the first stage of the study, ANSYS-CFX was used to represent one vertical Kaplan turbine unit by designing a three-dimensional (3-D) finite element (FE) model. This model was used to differentiate between the effect of turbine units’ operation on dam stability in accordance to maximum and minimum reservoir upstream water levels, and the varying flowrates in a fully open gate condition. In the second stage of the analysis, an ANSYS-static modeling approach was used to develop a 3-D FE earthfill dam model. The water pressure pattern determined on the boundary of the running turbine model is transformed into the pressure at the common area of the dam body with turbines. The model is inspected for maximum and minimum upstream water levels. Findings indicate that the water stress fluctuations on the dam body are proportional to the inverse distance from the turbine region. Also, it was found that the cone and outlet of the hydropower turbine system are the most affected regions when turbine is running. Based on the attained results, a systematic operation program was proposed in order to control the running hydropower plant with minimized principal stress at selected nodes on the dam model and the six turbines.
Open AccessA Systematic Operation Program of a Hydropower Plant Based on Minimizing the Principal Stress: Haditha Dam Case Study
Dam operation and management have become more complex recently because of the need for considering hydraulic structure sustainability and environmental protect on. An Earthfill dam that includes a powerhouse system is considered as a significant multipurpose hydraulic structure. Understanding the effects of running hydropower plant turbines on the dam body is one of the major safety concerns for earthfill dams. In this research, dynamic analysis of earthfill dam, integrated with a hydropower plant system containing six vertical Kaplan turbines (i.e., Haditha dam), is investigated. In the first stage of the study, ANSYS-CFX was used to represent one vertical Kaplan turbine unit by designing a three-dimensional (3-D) finite element (FE) model. This model was used to differentiate between the effect of turbine units’ operation on dam stability in accordance to maximum and minimum reservoir upstream water levels, and the varying flowrates in a fully open gate condition. In the second stage of the analysis, an ANSYS-static modeling approach was used to develop a 3-D FE earthfill dam model. The water pressure pattern determined on the boundary of the running turbine model is transformed into the pressure at the common area of the dam body with turbines. The model is inspected for maximum and minimum upstream water levels. Findings indicate that the water stress fluctuations on the dam body are proportional to the inverse distance from the turbine region. Also, it was found that the cone and outlet of the hydropower turbine system are the most affected regions when turbine is running. Based on the attained results, a systematic operation program was proposed in order to control the running hydropower plant with minimized principal stress at selected nodes on the dam model and the six turbines.
- Open Access
Minimizing the Principle Stresses of Powerhoused Rock-Fill Dams Using Control Turbine Running Units: Application of Finite Element Method
This study focuses on improving the safety of embankment dams by considering the effects of vibration due to powerhouse operation on the dam body. The study contains two main parts. In the first part, ANSYS-CFX is used to create the three-dimensional (3D) Finite Volume (FV) model of one vertical Francis turbine unit. The 3D model is run by considering various reservoir conditions and the dimensions of units. The Re-Normalization Group (RNG) k-ε turbulence model is employed, and the physical properties of water and the flow characteristics are defined in the turbine model. In the second phases, a 3D finite element (FE) numerical model for a rock-fill dam is created by using ANSYS®, considering the dam connection with its powerhouse represented by four vertical Francis turbines, foundation, and the upstream reservoir. Changing the upstream water table minimum and maximum water levels, standers earth gravity, fluid-solid interface, hydrostatic pressure, and the soil properties are considered. The dam model runs to cover all possibilities for turbines operating in accordance with the reservoir discharge ranges. In order to minimize stresses in the dam body and increase dam safety, this study optimizes the turbine operating system by integrating turbine and dam models.
Open AccessMinimizing the Principle Stresses of Powerhoused Rock-Fill Dams Using Control Turbine Running Units: Application of Finite Element Method
This study focuses on improving the safety of embankment dams by considering the effects of vibration due to powerhouse operation on the dam body. The study contains two main parts. In the first part, ANSYS-CFX is used to create the three-dimensional (3D) Finite Volume (FV) model of one vertical Francis turbine unit. The 3D model is run by considering various reservoir conditions and the dimensions of units. The Re-Normalization Group (RNG) k-ε turbulence model is employed, and the physical properties of water and the flow characteristics are defined in the turbine model. In the second phases, a 3D finite element (FE) numerical model for a rock-fill dam is created by using ANSYS®, considering the dam connection with its powerhouse represented by four vertical Francis turbines, foundation, and the upstream reservoir. Changing the upstream water table minimum and maximum water levels, standers earth gravity, fluid-solid interface, hydrostatic pressure, and the soil properties are considered. The dam model runs to cover all possibilities for turbines operating in accordance with the reservoir discharge ranges. In order to minimize stresses in the dam body and increase dam safety, this study optimizes the turbine operating system by integrating turbine and dam models.
- 6 May 2018
- Published by SCI AND TECH UNIVERSAL INC in Scientia Iranica
- Vol. 27 (1) , 159-176
Water Flow Stabilization Using Submerged Weir for Draft Tube Reaction Hydraulic Turbine
In turbine practice engineering, draft tube downstream running under extreme water flow pressure and velocity. This is causing a vibrations and pressure variation during different operation frequencies. The practical challenge of obtaining a stabilized water flow is ongoing domain of research. In this paper, a proposition of initiating submerged weir in the downstream of draft tube reaction turbine is inspected. The main goal of this research is to reduce the water flow pressure variation, velocity and shear distribution in accordance to the upstream water level influence. Two types of turbines including vertical Kaplan and Francis turbine units are examined. ANSYS CFX software tool is used to build three-dimension (3D) numerical models for the Kaplan and Francis turbines with building a submerged weir at the outlet of the draft tubes at three deferent height suggestions. The influence of the proposed submerged weir is studied the flow through these turbines by considering the dimensions of their components including the penstock with inlets, spiral casing, shafts and blades, and the draft tube with outlets. The findings of this research were tremendous proposition to solve the problem of negative pressure pulsation in draft tube of Kaplan and Francis turbines types.
- 6 May 2018
- Published by SCI AND TECH UNIVERSAL INC in Scientia Iranica
- Vol. 27 (1) , 159-176
Water Flow Stabilization Using Submerged Weir for Draft Tube Reaction Hydraulic Turbine
In turbine practice engineering, draft tube downstream running under extreme water flow pressure and velocity. This is causing a vibrations and pressure variation during different operation frequencies. The practical challenge of obtaining a stabilized water flow is ongoing domain of research. In this paper, a proposition of initiating submerged weir in the downstream of draft tube reaction turbine is inspected. The main goal of this research is to reduce the water flow pressure variation, velocity and shear distribution in accordance to the upstream water level influence. Two types of turbines including vertical Kaplan and Francis turbine units are examined. ANSYS CFX software tool is used to build three-dimension (3D) numerical models for the Kaplan and Francis turbines with building a submerged weir at the outlet of the draft tubes at three deferent height suggestions. The influence of the proposed submerged weir is studied the flow through these turbines by considering the dimensions of their components including the penstock with inlets, spiral casing, shafts and blades, and the draft tube with outlets. The findings of this research were tremendous proposition to solve the problem of negative pressure pulsation in draft tube of Kaplan and Francis turbines types.