Effect of non‐moment braced frame seismic deformations on buckling‐restrained brace end connection behavior: Theoretical analysis and subassemblage tests
Authors:
- 29 September 2015
- journal article
- research article
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 45 (3) , 359-381
Abstract
Summary: In‐plane buckling‐restrained brace (BRB) end rotation induced by frame action is a commonly observed phenomenon in buckling‐restrained braced frames (BRBFs). However, its effect on BRB end connection behavior has not yet been clear. In this study, four BRB end deformation modes for quick determination of end rotational demand are proposed for non‐moment BRBF considering different BRB arrangements, installing story of BRBs, and boundary condition of corner gussets connected with column base. Key factors affecting BRB end rotation and flexural moments are examined theoretically by parametric analysis. Subassemblage tests of seven BRB specimens under horizontal cyclic loading were conducted by adopting two loading frames to impose the expected BRB end deformations. It shows that BRB end rotation subjected BRB ends to significant flexural moments, leading to premature yielding of BRB ends or even tendency of end zone buckling. The deformation modes, the flexural rigidity of BRB ends, and the initial geometric imperfections of BRBs were found to have significant influence on BRB end connection behavior. The triggering moment induced by BRB end rotation was the main contributor to end flexural moment. However, the moment amplification effect induced by flexure of BRB end zones became prominent especially for small flexural rigidity of BRB ends. Implications and future research needs for design of BRB end connections are provided finally based on the theoretical and experimental results. Copyright © 2015 John Wiley & Sons, Ltd.Keywords
Funding Information
- National Natural Science Foundation of China (51408226)
This publication has 29 references indexed in Scilit:
- A new perforated core buckling restrained braceEngineering Structures, 2015
- Experimental and numerical developing of reduced length buckling-restrained bracesEngineering Structures, 2014
- Global Restraint in Ultra-Lightweight Buckling-Restrained BracesJournal of Composites for Construction, 2013
- Subassemblage cyclic loading test of RC frame with buckling restrained braces in zigzag configurationEarthquake Engineering & Structural Dynamics, 2012
- Improving Low-Cycle Fatigue Performance of High-Performance Buckling-Restrained Braces by Toe-Finished MethodJournal of Earthquake Engineering, 2012
- Developing high‐performance aluminum alloy buckling‐restrained braces based on series of low‐cycle fatigue testsEarthquake Engineering & Structural Dynamics, 2011
- A low-tech dissipative buckling restrained brace. Design, analysis, production and testingEngineering Structures, 2009
- Pseudo‐dynamic test of a full‐scale CFT/BRB frame—Part II: Seismic performance of buckling‐restrained braces and connectionsEarthquake Engineering & Structural Dynamics, 2008
- Buckling-restrained brace using steel mortar planks; performance evaluation as a hysteretic damperEarthquake Engineering & Structural Dynamics, 2006
- Component Testing, Seismic Evaluation and Characterization of Buckling-Restrained BracesJournal of Structural Engineering, 2004