Characteristics and Laser Performance of Yb3+-Doped Silica Large Mode Area Fibers Prepared by Sol–Gel Method
Open Access
Abstract
Large-size 0.1 Yb2O3–1.0 Al2O3–98.9 SiO2 (mol%) core glass was prepared by the sol–gel method. Its optical properties were evaluated. Both large mode area double cladding fiber (LMA DCF) with core diameter of 48 µm and large mode area photonic crystal fiber (LMA PCF) with core diameter of 90 µm were prepared from this core glass. Transmission loss at 1200 nm is 0.41 dB/m. Refractive index fluctuation is less than 2 × 10−4. Pumped by 976 nm laser diode LD pigtailed with silica fiber (NA 0.22), the slope efficiency of 54% and “light-to-light” conversion efficiency of 51% were realized in large mode area double cladding fiber, and 81 W laser power with a slope efficiency of 70.8% was achieved in the corresponding large mode area photonic crystal fiber.Keywords
This publication has 17 references indexed in Scilit:
- Fabrication and laser behaviors of Yb3+ doped silica large mode area photonic crystal fiber prepared by sol–gel methodOptical Materials, 2013
- Symmetric Inertial Confinement Fusion Implosions at Ultra-High Laser EnergiesScience, 2010
- Mid-Infrared Emission Characteristic and Energy Transfer of Ho3+-Doped Tellurite Glass Sensitized by Tm3+Journal of Fluorescence, 2007
- Materials for high-power fiber lasersJournal of Non-Crystalline Solids, 2006
- Characterization of porous core layer for controlling rare earth incorporation in optical fiberOptics Express, 2006
- Single-mode plane-polarized ytterbium-doped large-core fiber laser with 633-W continuous-wave output powerOptics Letters, 2005
- High Power Fiber LasersOptics and Photonics News, 2004
- Endlessly single-mode photonic crystal fiberOptics Letters, 1997
- Analysis of OH absorption bands in synthetic silicaJournal of Non-Crystalline Solids, 1996
- Coordination of Yb3+ in some inorganic glasses from optical absorption and emission studiesChemical Physics Letters, 1969