Lili Hu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Lili Hu has a total of 62 co-authors. Here are the top co-authors by number of shared publications:
Chun-Lei Yu
4 shared publications- Danping Chen
Key Laboratory of Materials for High Power Laser, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, PR China
4 shared publications Song Li
3 shared publicationsGuo-Jian Yang
2 shared publications- Huiyan Fan
SCHOTT Glass Technologies (Suzhou) Co., Ltd, Suzhou 215009, China
2 shared publications Junjie Zhang Junjie Zhang
Key Laboratory of Materials for High Power Laser,Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences,Shanghai ,China;)
2 shared publications
Latest Publications
- 16 February 2017
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10100, 101001
Coherent supercontinuum in a silicate glass composite fiber with all-normal dispersion
With all-normal-dispersion fibers, highly coherent supercontinuum (SC) can be obtained, which has several applications. Traditional air-hole photonic crystal fibers encountered some limitations for such light emission. In this study, all solid composite fibers with a silica glass cladding and a yttria-alumino-silicate glass core were fabricated, which were designed for flat coherent SCs. We achieved a flat normal dispersion in this composite fiber. Flat SCs were experimentally demonstrated with different pump conditions. The simulated SC spectra coincided well with the experimental results. It also indicated that a coherent SC with more than one octave can be obtained with higher input power. © (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
- 16 February 2017
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10100, 101001
Coherent supercontinuum in a silicate glass composite fiber with all-normal dispersion
With all-normal-dispersion fibers, highly coherent supercontinuum (SC) can be obtained, which has several applications. Traditional air-hole photonic crystal fibers encountered some limitations for such light emission. In this study, all solid composite fibers with a silica glass cladding and a yttria-alumino-silicate glass core were fabricated, which were designed for flat coherent SCs. We achieved a flat normal dispersion in this composite fiber. Flat SCs were experimentally demonstrated with different pump conditions. The simulated SC spectra coincided well with the experimental results. It also indicated that a coherent SC with more than one octave can be obtained with higher input power. © (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
- 1 January 2016
- Published by Shanghai Institute of Optics and Fine Mechanics in Chinese Optics Letters
- Vol. 14 (1) , 011402-11404
Watt-level output rectangular-core neodymium-doped silicate glass fiber laser
We produce a maximum 1.45 W laser output at 1064 nm using a neodymium-doped silicate glass fiber that has a rectangular core with dimensions of ~6.3 μm×31.5 μm. The measured divergence angles of the output laser in two dimensions are 3.22° and 1.76°, respectively. The output power is stable and limited only by the available pump power.
- 1 January 2016
- Published by Shanghai Institute of Optics and Fine Mechanics in Chinese Optics Letters
- Vol. 14 (1) , 011402-11404
Watt-level output rectangular-core neodymium-doped silicate glass fiber laser
We produce a maximum 1.45 W laser output at 1064 nm using a neodymium-doped silicate glass fiber that has a rectangular core with dimensions of ~6.3 μm×31.5 μm. The measured divergence angles of the output laser in two dimensions are 3.22° and 1.76°, respectively. The output power is stable and limited only by the available pump power.
- 1 December 2014
- Published by Elsevier in Optical Materials
- Vol. 38, 167-173
Judd–Ofelt analysis and energy transfer processes of Er3+ and Nd3+ doped fluoroaluminate glasses with low phosphate content
- 1 December 2014
- Published by Elsevier in Optical Materials
- Vol. 38, 167-173
Judd–Ofelt analysis and energy transfer processes of Er3+ and Nd3+ doped fluoroaluminate glasses with low phosphate content
- Open Access
Energy Transfer between Er3+ and Pr3+ for 2.7 μm Fiber Laser Material
Energy transfer mechanisms between Er3+ and Pr3+ in Er3+/Pr3+ codoped germinate glass are investigated in detail. Under 980 nm LD pumping, 2.7 μm fluorescence intensity enhanced greatly. Meanwhile, 1.5 μm lifetime and fluorescence were suppressed deeply due to the efficient energy transfer from Er3+:4I13/2 to Pr3+:3F3,4, which depopulates the 4I13/2 level and promotes the 2.7 μm transition effectively. The obvious change in J-O parameters indicates that Pr3+ influences the local environment of Er3+ significantly. The increased spontaneous radiative probability in Er3+/Pr3+ glass is further evidence for enhanced 4I11/2 → 4I13/2 transition. The Er3+:4I11/2→Pr3+:1G4 process is harmful to the population accumulation on 4I11/2 level, which inhibits the 2.7 μm emission. The microscopic energy transfer coefficient of Er3+:4I13/2→Pr3+:3F3,4 is 42.25 × 10−40 cm6/s, which is 11.5 times larger than that of Er3+:4I11/2→Pr3+:1G4. Both processes prefer to be non-phonon assisted, which is the main reason why Pr3+ is so efficient in Er3+:2.7 μm emission.
Open AccessEnergy Transfer between Er3+ and Pr3+ for 2.7 μm Fiber Laser Material
Energy transfer mechanisms between Er3+ and Pr3+ in Er3+/Pr3+ codoped germinate glass are investigated in detail. Under 980 nm LD pumping, 2.7 μm fluorescence intensity enhanced greatly. Meanwhile, 1.5 μm lifetime and fluorescence were suppressed deeply due to the efficient energy transfer from Er3+:4I13/2 to Pr3+:3F3,4, which depopulates the 4I13/2 level and promotes the 2.7 μm transition effectively. The obvious change in J-O parameters indicates that Pr3+ influences the local environment of Er3+ significantly. The increased spontaneous radiative probability in Er3+/Pr3+ glass is further evidence for enhanced 4I11/2 → 4I13/2 transition. The Er3+:4I11/2→Pr3+:1G4 process is harmful to the population accumulation on 4I11/2 level, which inhibits the 2.7 μm emission. The microscopic energy transfer coefficient of Er3+:4I13/2→Pr3+:3F3,4 is 42.25 × 10−40 cm6/s, which is 11.5 times larger than that of Er3+:4I11/2→Pr3+:1G4. Both processes prefer to be non-phonon assisted, which is the main reason why Pr3+ is so efficient in Er3+:2.7 μm emission.
- Open Access
Characteristics and Laser Performance of Yb3+-Doped Silica Large Mode Area Fibers Prepared by Sol–Gel Method
Large-size 0.1 Yb2O3–1.0 Al2O3–98.9 SiO2 (mol%) core glass was prepared by the sol–gel method. Its optical properties were evaluated. Both large mode area double cladding fiber (LMA DCF) with core diameter of 48 µm and large mode area photonic crystal fiber (LMA PCF) with core diameter of 90 µm were prepared from this core glass. Transmission loss at 1200 nm is 0.41 dB/m. Refractive index fluctuation is less than 2 × 10−4. Pumped by 976 nm laser diode LD pigtailed with silica fiber (NA 0.22), the slope efficiency of 54% and “light-to-light” conversion efficiency of 51% were realized in large mode area double cladding fiber, and 81 W laser power with a slope efficiency of 70.8% was achieved in the corresponding large mode area photonic crystal fiber.
Open AccessCharacteristics and Laser Performance of Yb3+-Doped Silica Large Mode Area Fibers Prepared by Sol–Gel Method
Large-size 0.1 Yb2O3–1.0 Al2O3–98.9 SiO2 (mol%) core glass was prepared by the sol–gel method. Its optical properties were evaluated. Both large mode area double cladding fiber (LMA DCF) with core diameter of 48 µm and large mode area photonic crystal fiber (LMA PCF) with core diameter of 90 µm were prepared from this core glass. Transmission loss at 1200 nm is 0.41 dB/m. Refractive index fluctuation is less than 2 × 10−4. Pumped by 976 nm laser diode LD pigtailed with silica fiber (NA 0.22), the slope efficiency of 54% and “light-to-light” conversion efficiency of 51% were realized in large mode area double cladding fiber, and 81 W laser power with a slope efficiency of 70.8% was achieved in the corresponding large mode area photonic crystal fiber.
- Open Access
Er3+/Ho3+-Codoped Fluorotellurite Glasses for 2.7 µm Fiber Laser Materials
This work reports the enhanced emission at 2.7 µm in Er3+/Ho3+-codoped fluorotellurite glass upon a conventional 980 nm laser diode. The significantly reduced green upconversion and 1.5 µm emission intensity in Er3+/Ho3+-codoped samples are observed. The results suggest that the Er3+: 4I13/2 state can be efficiently depopulated via energy transfer from Er3+ to Ho3+ and the detailed energy transfer mechanisms are discussed qualitatively. The energy transfer efficiency from Er3+: 4I13/2 to Ho3+: 5I7 is calculated to be as high as 67.33%. The calculated emission cross-section in Er3+/Ho3+-codoped fluorotellurite glass is 1.82 × 10−20 cm2. This suggests that Er3+/Ho3+-codoped fluorotellurite glass is a potential material for 2.7 µm fiber laser.
Open AccessEr3+/Ho3+-Codoped Fluorotellurite Glasses for 2.7 µm Fiber Laser Materials
This work reports the enhanced emission at 2.7 µm in Er3+/Ho3+-codoped fluorotellurite glass upon a conventional 980 nm laser diode. The significantly reduced green upconversion and 1.5 µm emission intensity in Er3+/Ho3+-codoped samples are observed. The results suggest that the Er3+: 4I13/2 state can be efficiently depopulated via energy transfer from Er3+ to Ho3+ and the detailed energy transfer mechanisms are discussed qualitatively. The energy transfer efficiency from Er3+: 4I13/2 to Ho3+: 5I7 is calculated to be as high as 67.33%. The calculated emission cross-section in Er3+/Ho3+-codoped fluorotellurite glass is 1.82 × 10−20 cm2. This suggests that Er3+/Ho3+-codoped fluorotellurite glass is a potential material for 2.7 µm fiber laser.
- 15 January 2013
- Published by Elsevier in Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy
- Vol. 101, 49-53
Mid-infrared spectroscopic properties and energy transfer of Er3+/Yb3+ co-doped bismuth germanate glass
- 15 January 2013
- Published by Elsevier in Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy
- Vol. 101, 49-53
Mid-infrared spectroscopic properties and energy transfer of Er3+/Yb3+ co-doped bismuth germanate glass
- 1 October 2012
- Vol. 32 (10) , 2597-600
[Infrared multiphoton quantum cutting phenomena of rare earth materials].
Infrared quantum cutting of rare earth ion is an international hot research field. It is significant for the enhancement of solar cell efficiency and for the reduction of solar cell price. The present paper summarizes the research significance of infrared quantum cutting of rare earth ion. Based on the summarization of general principle and loss mechanism of solar cell, the possible method to enhance the solar cell efficiency by infrared quantum cutting is analyzed. Meanwhile, the present paper summarizes the infrared quantum cutting phenomena of Er3+ ion single-doped material. There is intense 4I13/2 --> 4I15/2 infrared quantum cutting luminescence of Er3+ ion when the 2H11/2 energy level is excited. The intense {2H11/2 --> 4I9/2, 4I15/2 --> 4I13/2} cross energy transfer is the main reason for the result in the high quantum cutting efficiency when the 2H11/2 energy level is excited.
- 1 October 2012
- Vol. 32 (10) , 2597-600
[Infrared multiphoton quantum cutting phenomena of rare earth materials].
Infrared quantum cutting of rare earth ion is an international hot research field. It is significant for the enhancement of solar cell efficiency and for the reduction of solar cell price. The present paper summarizes the research significance of infrared quantum cutting of rare earth ion. Based on the summarization of general principle and loss mechanism of solar cell, the possible method to enhance the solar cell efficiency by infrared quantum cutting is analyzed. Meanwhile, the present paper summarizes the infrared quantum cutting phenomena of Er3+ ion single-doped material. There is intense 4I13/2 --> 4I15/2 infrared quantum cutting luminescence of Er3+ ion when the 2H11/2 energy level is excited. The intense {2H11/2 --> 4I9/2, 4I15/2 --> 4I13/2} cross energy transfer is the main reason for the result in the high quantum cutting efficiency when the 2H11/2 energy level is excited.
- Open Access
- 1 January 2012
- Published by Shanghai Institute of Optics and Fine Mechanics in Chinese Optics Letters
- Vol. 10 (9) , 091601-91603
Ef f icient 2.7-\mu m emission in Er3+-doped bismuth germanate glass pumped by 980-nm laser diode
An Er3+-doped lead-free bismuth germanate glass is synthesized. Its 2.7-\mu m emission property is analyzed, and the efficient 2.7-\mu m emission from the glass is observed under 980-nm laser diode excitation. The prepared glass possesses high spontaneous transition probability (64.8 s?1) and a large calculated emission cross section (6.61 \times 10^{?21} cm2) corresponding to the 4I11/2 -> 4I13/2 transition. The multiphonon relaxation rate for the excited state 4I11/2 is only 236 s?1. Therefore, the excellent spectroscopic properties and outstanding thermal stability suggest that this glass is a suitable host for developing solid-state lasers operating in the mid-infrared. Copyright: © 2003-2012 . This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. View PDF
- 1 January 2012
- Published by Shanghai Institute of Optics and Fine Mechanics in Chinese Optics Letters
- Vol. 10 (9) , 091601-91603
Open AccessEf f icient 2.7-\mu m emission in Er3+-doped bismuth germanate glass pumped by 980-nm laser diode
An Er3+-doped lead-free bismuth germanate glass is synthesized. Its 2.7-\mu m emission property is analyzed, and the efficient 2.7-\mu m emission from the glass is observed under 980-nm laser diode excitation. The prepared glass possesses high spontaneous transition probability (64.8 s?1) and a large calculated emission cross section (6.61 \times 10^{?21} cm2) corresponding to the 4I11/2 -> 4I13/2 transition. The multiphonon relaxation rate for the excited state 4I11/2 is only 236 s?1. Therefore, the excellent spectroscopic properties and outstanding thermal stability suggest that this glass is a suitable host for developing solid-state lasers operating in the mid-infrared. Copyright: © 2003-2012 . This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. View PDF
- Open Access
- 1 January 2012
- Published by Shanghai Institute of Optics and Fine Mechanics in Chinese Optics Letters
- Vol. 10 (7) , 071603-71607
Spectroscopic properties and energy transfer processes in Er3+/Nd3+ co-doped tellurite glass for 2.7-\mu m laser materials
Intense 2.7-\mu m emissions are obtained from Er3+/Nd3+ co-doped tellurite glass samples under the 808-nm laser diode excitation. According to the absorption spectra, Judd-Ofelt parameters and radiative transition probabilities are calculated and analyzed using the Judd-Ofelt theory. The spectroscopic properties and energy transfer mechanism between Er3+ and Nd3+ are analyzed. The effects of OH? content on the spectroscopic properties of Er3+/Nd3+ co-doped samples are discussed. The obtained results indicate that Er3+/Nd3+ co-doped tellurite glass can significantly develop optical properties of 2.7-\mu m emission, if OH?groups can be effectively eliminated. Copyright: © 2003-2012 . This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. View PDF
- 1 January 2012
- Published by Shanghai Institute of Optics and Fine Mechanics in Chinese Optics Letters
- Vol. 10 (7) , 071603-71607
Open AccessSpectroscopic properties and energy transfer processes in Er3+/Nd3+ co-doped tellurite glass for 2.7-\mu m laser materials
Intense 2.7-\mu m emissions are obtained from Er3+/Nd3+ co-doped tellurite glass samples under the 808-nm laser diode excitation. According to the absorption spectra, Judd-Ofelt parameters and radiative transition probabilities are calculated and analyzed using the Judd-Ofelt theory. The spectroscopic properties and energy transfer mechanism between Er3+ and Nd3+ are analyzed. The effects of OH? content on the spectroscopic properties of Er3+/Nd3+ co-doped samples are discussed. The obtained results indicate that Er3+/Nd3+ co-doped tellurite glass can significantly develop optical properties of 2.7-\mu m emission, if OH?groups can be effectively eliminated. Copyright: © 2003-2012 . This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. View PDF