Energy‐saving process configurations for monoethanolamine‐based CO2 capture system
- 3 September 2020
- journal article
- research article
- Published by Wiley in Asia-Pacific Journal of Chemical Engineering
- Vol. 16 (1)
Abstract
It is evident from several researches that combining a couple of process modifications is effective in reducing reboiler duty in the chemical absorption‐based carbon capture process. Although extensive works on these combined modifications exist in literature, studies on combined lean vapour compression (LVC) and rich solvent preheating (RSP) are unavailable, despite their potentials as promising energy‐saving technologies. This simulation‐based study therefore explored standalone and combined process modifications capable of minimizing reboiler duty in monoethanolamine (MEA)‐based postcombustion CO2 capture system. Using the electrolyte nonrandom two‐liquid (ELECNRTL) property method in Aspen Plus®, a rigorous rate‐based simulation was performed and validated for conventional MEA‐based capture system. Subsequently, three main process modifications, namely, LVC, RSP and combined LVC and RSP, were investigated to evaluate their impact on energy consumption level in the stripping column. The modifications were able to reduce the total equivalent electrical penalty on the power plant by 12.94%, 5.24% and 14.48%, respectively. The results from this study demonstrate that a detailed optimization of the combined LVC and RSP process configuration could achieve considerable energy saving in MEA‐based capture systems.Keywords
This publication has 43 references indexed in Scilit:
- Optimized process configurations of post-combustion CO2 capture for natural-gas-fired power plant – Power plant efficiency analysisInternational Journal of Greenhouse Gas Control, 2012
- Stripper configurations for CO2 capture by aqueous monoethanolamineChemical Engineering Research and Design, 2011
- Industrial test and techno-economic analysis of CO2 capture in Huaneng Beijing coal-fired power stationApplied Energy, 2010
- Techno-Economic Analysis of Postcombustion Processes for the Capture of Carbon Dioxide from Power Plant Flue GasIndustrial & Engineering Chemistry Research, 2010
- CO2 Capture Technologies for Cement IndustryEnergy Procedia, 2009
- Alternative stripper configurations for CO2 capture by aqueous aminesAIChE Journal, 2007
- Integration of CO2 capture unit using single- and blended-amines into supercritical coal-fired power plants: Implications for emission and energy managementInternational Journal of Greenhouse Gas Control, 2007
- Innovative Absorber/Stripper Configurations for CO2 Capture by Aqueous MonoethanolamineIndustrial & Engineering Chemistry Research, 2005
- Energy Performance of Stripper Configurations for CO2 Capture by Aqueous AminesIndustrial & Engineering Chemistry Research, 2005
- Separation of CO2 from Flue Gas: A ReviewSeparation Science and Technology, 2005