Study on Nb APC Nb-Ti Superconductor Made by Powder Metallurgy
- 9 February 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (3) , 1-5
Abstract
The incorporation of Artificial Pinning Centers (APC) into Nb-Ti superconductors has been demonstrated as an effective method for enhancing their performance. Typically, APC Nb-Ti superconductors are fabricated using the Powder-Metallurgy technique, which involves the utilization of fine Nb-Ti powder and APC powder as precursors. The efficacy of APCs is largely determined by their size, quantity, and distribution, which are crucial factors influencing the Critical Current Density ( Jc ) of APC Nb-Ti superconductors. In this study, various batches of Nb-Ti and Nb powder with particle sizes ranging from 15 to 150 microns and different ratios were employed to produce APC Nb-Ti superconductors. We explored the influence of Nb particle size and shape on the superconducting properties and microstructure of APC Nb-Ti superconductors. Experimental findings indicate that Nb-APC Nb-Ti superconductors exhibit enhanced Critical Current Density at lower magnetic fields. Furthermore, reducing the processing strain notably improves the Critical Current Density. The Critical Current Density of Nb-APC Nb-Ti superconductors reached 7730 A/mm 2 at 2T, following a heat treatment of 400 °C for 20 hours, repeated three times, and utilizing Nb powder with sizes between 50 and 150 μm.Keywords
This publication has 19 references indexed in Scilit:
- Enhanced critical current density in multifilamentary NbTi/Cu superconductors with highly aligned artificial pinning centerPhysica C: Superconductivity and its Applications, 2004
- Multifilament Superconducting Wire Based on NbTi Alloy in a Combined Copper/Copper-Nickel MatrixAIP Conference Proceedings, 2004
- Flux pinning behavior in Nb50Ti/Cu superconducting composite with different form of artificial pinning centerPhysica C: Superconductivity and its Applications, 2003
- Increased critical current density in Nb–Ti wires having Nb artificial pinning centersApplied Physics Letters, 1997
- Ferromagnetic artificial pinning centers in superconducting Nb0.36Ti0.64 wiresApplied Physics Letters, 1996
- Properties of niobium–titanium superconducting wires with Nb artificial pinning centersJournal of Applied Physics, 1996
- Critical current degradation of a NbTi-multifilament conductor due to heat treatmentIEEE Transactions on Magnetics, 1994
- Superconducting wire and cable for RHICIEEE Transactions on Magnetics, 1994
- Development of in-situ second phase pinning structure in niobium-titanium based superconducting alloysIEEE Transactions on Magnetics, 1991
- A 13 T-1.8 K NbTi laboratory test coilIEEE Transactions on Magnetics, 1988