Transparent Perovskite Light-Emitting Touch-Responsive Device
- 7 November 2017
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 11 (11) , 11368-11375
Abstract
A light-emitting touch-responsive device (LETD) for instantaneous visualization of pressure mapping is reported. The LETD integrates an organometal halide perovskite polymer composite emissive layer and a flexible silver nanowire polyurethane composite transparent electrode. The composite emissive layer contains methylammonium lead bromide nanocrystals uniformly dispersed in a poly(ethylene oxide) (PEO) matrix and emits an intense green luminescence that peaks at 529 nm. The PEO matrix promotes the formation of small perovskite grains (∼20 nm) and a pinhole-free composite film with surface roughness of only 2.96 nm. The composite transparent electrode is separated from the emissive layer with a 100 μm thick spacer. When a local pressure is applied, a Schottky contact is formed instantaneously between the metal and the emissive layer, and electroluminescence is produced at voltages as low as 2.5 V and reaches 1030 cd/m2 at 6 V. The transparent LETD has approximately 68% transparency. It can be bent to a 6 mm radius when polyethylene terephthalate is used as the substrate. The perovskite LETD has fast response and can be pixelated to offer potential applications in robotics, motion detection, fingerprint devices, and interactive wallpapers.Keywords
Funding Information
- Ministry of Education
- Air Force Office of Scientific Research (FA9550-15-1-0340)
This publication has 37 references indexed in Scilit:
- Organic light emitting board for dynamic interactive displayNature Communications, 2017
- Perovskite Materials for Light‐Emitting Diodes and LasersAdvanced Materials, 2016
- Flexible and Stretchable Physical Sensor Integrated Platforms for Wearable Human‐Activity Monitoringand Personal HealthcareAdvanced Materials, 2016
- Fully Printed Halide Perovskite Light-Emitting Diodes with Silver Nanowire ElectrodesACS Nano, 2015
- Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodesScience, 2015
- Highly Sensitive and Multimodal All‐Carbon Skin Sensors Capable of Simultaneously Detecting Tactile and Biological StimuliAdvanced Materials, 2015
- A wearable and highly sensitive pressure sensor with ultrathin gold nanowiresNature Communications, 2014
- User-interactive electronic skin for instantaneous pressure visualizationNature Materials, 2013
- Transparent Stretchable Single‐Walled Carbon Nanotube‐Polymer Composite Films with Near‐Infrared FluorescenceAdvanced Materials, 2013
- A review of tactile sensing technologies with applications in biomedical engineeringSensors and Actuators A: Physical, 2012