Study on the erosion characteristics of copper‐carbon electrode pairs by DC air arc
Open Access
- 7 June 2021
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in High Voltage
- Vol. 6 (4) , 674-683
Abstract
As common electric contact materials, copper‐carbon electrode pairs are widely used in the field of electric contact such as in high‐speed railways, motor collector rings and grounding brushes. They play a key role in energy transmission in the above‐mentioned systems. Arc erosion has become a key issue threatening system safety. In this work, a dedicated arc erosion platform was built to study the polarity effect of copper‐carbon electrode pairs. It was found that arc dynamics and electrodes erosion behaviours were significantly different under different polarities, which could be understood from the mechanism of heat transfer, cooling and electron emission of the electrode. Then, when the carbon material was used as an anode, the arc caused carbon transfer: the carbon material sublimated quickly due to electron condensation and thermal conduction and quickly condensed on the low‐temperature metal electrode, while the carbon material transfer could partly inhibit the oxidation of the cathode metal electrode. In addition, the rapid sublimation of the carbon material produced high‐temperature airflow, which would make the arc impedance fluctuate and cause the arc voltage to jump. Finally, the anode heat transfer and cathode cooling mechanism directly affected the material state, and the erosion of the anode material was more serious.Keywords
Funding Information
- National Natural Science Foundation of China (51772081, 51807167, 51837009, 51922090, U19A20105)
This publication has 36 references indexed in Scilit:
- The development of China’s high-speed railway systems and a study of the dynamics of coupled systems in high-speed trainsProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2013
- Effect of electrical current on tribological behavior of copper-impregnated metallized carbon against a Cu–Cr–Zr alloyTribology International, 2012
- Heat effect of thermal-field emission of electrons from metalHigh Temperature, 2011
- Predictions of weld pool profiles using plasma physicsJournal of Physics D: Applied Physics, 2006
- Low temperature refrigeration by electron emission in a crossed-field gapApplied Physics Letters, 2006
- Cathode erosion in high-current high-pressure arcJournal of Physics D: Applied Physics, 2003
- An experimental investigation of factors affecting arc-cathode erosionJournal of Physics D: Applied Physics, 1998
- A simplified unified theory of arcs and their electrodesJournal of Physics D: Applied Physics, 1997
- Erosion and ionization in the cathode spot regions of vacuum arcsJournal of Applied Physics, 1973
- Cathodic contact erosion due to short-duration gas breakdown arcsJournal of Physics D: Applied Physics, 1972