Plugging characteristics of self-degradable diverters within three-dimensional hydro-fractures: An experimental investigation
Open Access
- 1 September 2023
- journal article
- research article
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (9)
Abstract
The dominant fracture can be effectively plugged by injecting self-degradable diverters during temporary plugging fracturing. The subsequent fracturing fluids can divert into the poor fractures. The fracture complexity can be enlarged and the well production can be enhanced. This study established a new diverter temporary plugging evaluation system and carried out 23 groups of temporary plugging experiments to investigate the plugging characteristics of diverters within three-dimensional (3D) hydro-fractures. Experimental results show that (1) the formation process of a temporary plugged zone is determined by the bridging capability of the most significant particulates; (2) the tight plugged zone can undergo diverter attachment, bridging, filling, and compaction or diverter bridging, filling, and compaction; (3) diverters are most likely to plug distorted fractures, followed by inclined-flat fractures, and then axial/transverse-flat fractures due to the varying widths of hydro-fractures; (4) pure fibers can plug hydro-fractures when the fracture width is less than 1.5 mm, and the difference in the diameter of bridging particulates and the fracture width should be less than 1.5 mm when the fracture width exceeds 2.5 mm. Meanwhile, this study investigates the optimal temporary plugging agent formulations for different fracture widths based on economic factors and operational conditions, providing on-site recommendations.Keywords
Funding Information
- Natural Science Foundation of Xinjiang Uygur Autonomous Region (2022D01B77)
- Research Foundation of China University of Prtroleum-Beijing at Karamay (No. XQZX20210001)
- National Natural Science Foundation of China (No. 52104011)
This publication has 22 references indexed in Scilit:
- Understanding hydraulic fracture propagation behavior in tight sandstone–coal interbedded formations: an experimental investigationPetroleum Science, 2019
- Quantitative investigation of fracture interaction by evaluating fracture curvature during temporarily plugging staged fracturingJournal of Petroleum Science and Engineering, 2019
- High efficiency reservoir stimulation based on temporary plugging and diverting for deep reservoirsPetroleum Exploration and Development, 2018
- Effects of previously created fracture on the initiation and growth of subsequent fracture during TPMSFEngineering Fracture Mechanics, 2018
- Numerical simulation on near-wellbore temporary plugging and diverting during refracturing using XFEM-Based CZMJournal of Natural Gas Science and Engineering, 2018
- Experimental study on the growth behavior of supercritical CO2-induced fractures in a layered tight sandstone formationJournal of Natural Gas Science and Engineering, 2018
- Assessment of miscible light-hydrocarbon-injection recovery efficiency in Bakken shale formation using wireline-log-derived indicesMarine and Petroleum Geology, 2018
- Evaluation of wettability alteration and IFT reduction on mitigating water blocking for low-permeability oil-wet rocks after hydraulic fracturingFuel, 2017
- An experimental study on the mechanism of degradable fiber-assisted diverting fracturing and its influencing factorsJournal of Natural Gas Science and Engineering, 2015
- An optimal design for millimeter-wide facture plugging zoneNatural Gas Industry B, 2015