Debromination and Reusable Glass Fiber Recovery from Large Waste Circuit Board Pieces in Subcritical Water Treatment
Open Access
- 13 July 2022
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (29) , 25422-25432
Abstract
The great economic, social, and environmental interest that favors an effective management of the recycling of waste printed circuit boards (WCBs) encourages research on the improvement of processes capable of mitigating their harmful effects. In this work, the debromination of large WCBs was first performed through a hydrothermal process employing potassium carbonate as an additive. A total of 32 runs were carried out at 225 degrees C, various CO32-/Br- anionic ratios of 1:1, 2:1, 4:1, and 6:1, treatment times from 30 to 360 min, proportion of submerged WCBs in the liquid of 100, 50, and 25% that corresponded with the use of three WCB sizes of 20 mm x 16.5 mm, 20 mm x 33 mm, and 80 mm x 33 mm, respectively, and solid/liquid ratios of 1:2 and 1:1 g/mL without other metallic catalysts. A debromination efficiency of 50 wt % was reached at only 225 degrees C (limited by mechanical reasons) and 360 min, using a CO32-/Br- anionic ratio of 4:1 and a solid/liquid ratio of 1:2 for a large WCB with only 25% of its volume submerged in the liquid. This means conservation of water and energy compared to previous studies. A muffle furnace was used later to thermally treat a total of 101 debrominated samples, at constant temperature or following a temperature scaling program. An estimated decrease in resistance to rupture of glass fibers of only around 50% was accomplished by following a temperature scaling program up to 475 degrees C, obtaining clean glass fibers of large size. The simple techniques proposed to obtain reusable glass fibers from WCBs as large as the size of the reactor allows (as it might be in their original size) could significantly improve interest in the industry.Keywords
Funding Information
- Ministerio de Ciencia e Innovaci?n (BES-2017-080382, PID2019-105359RB-I00)
- Universidad de Alicante (UAUSTI20-05)
This publication has 33 references indexed in Scilit:
- Recycling glass fibre reinforced composites – history and progressReinforced Plastics, 2013
- Degradation of brominated flame retardant in computer housing plastic by supercritical fluidsJournal of Hazardous Materials, 2012
- Application of Subcritical Water for Conversion of Macroalgae to Value-Added MaterialsIndustrial & Engineering Chemistry Research, 2011
- Mechanical properties of thermally-treated and recycled glass fibresComposites Part B: Engineering, 2011
- Recycling of non-metallic fractions from waste printed circuit boards: A reviewJournal of Hazardous Materials, 2009
- Recycling technologies for thermoset composite materials—current statusComposites Part A: Applied Science and Manufacturing, 2006
- Thermo-oxidative decomposition of polyvinyl chlorideJournal of Analytical and Applied Pyrolysis, 2005
- Thermal Degradation and Decomposition Products of Electronic Boards Containing BFRsIndustrial & Engineering Chemistry Research, 2005
- Recycling technologies for the treatment of end of life printed circuit boards (PCBs)Circuit World, 2003
- The characterisation and reuse of glass fibres recycled from scrap composites by the action of a fluidised bed processComposites Part A: Applied Science and Manufacturing, 1998