Investigation of charge preparation strategies for controlled premixed charge compression ignition combustion using a variable pressure injection system
Authors:
- 23 June 2010
- journal article
- research article
- Published by SAGE Publications in International Journal of Engine Research
- Vol. 11 (4) , 257-282
Abstract
This paper uses a multi-dimensional computational fluid dynamics (CFD) code coupled with detailed chemistry, the KIVA-CHEMKIN code, to provide guidelines for solving problems with premixed combustion strategies, namely, lack of combustion phasing control, excessive pressure rise rate, and spray wall impingement due to early injections. A multiple injection concept is used to control combustion phasing and reduce the rate of peak pressure rise. To address spray—wall impingement, an adaptive injection strategy (AIS) using two-injection pulses at different injection pressures is employed. The combustion process considered is at a mid-load operating condition for the light-duty engine of the present study (nominal indicated mean effective pressure (IMEP) of 5.5 bar and high speed, 2000 r/min) and the effects of first and second pulse injection pressure and timing, swirl ratio, and spray targeting are explored. The investigation showed that an optimized low-pressure early cycle injection combined with a high-pressure near top dead centre (TDC) injection allows combustion phasing to be well controlled while achieving premixed compression ignition (PCI)-like emissions levels. An improved solution was found with near-zero nitric oxides (NO x) and soot, a net indicated specific fuel consumption (ISFC) of only 175 g/kW h, and a peak pressure rise rate of ∼8 bar/deg.Keywords
This publication has 28 references indexed in Scilit:
- Simulating low temperature diesel combustion with improved spray modelsInternational Journal of Thermal Sciences, 2009
- An adaptive multi-grid chemistry (AMC) model for efficient simulation of HCCI and DI engine combustionCombustion Theory and Modelling, 2009
- COMPREHENSIVE COLLISION MODEL FOR MULTIDIMENSIONAL ENGINE SPRAY COMPUTATIONSAtomization and Sprays, 2009
- A reduced chemical kinetic model for IC engine combustion simulations with primary reference fuelsCombustion and Flame, 2008
- NUMERICAL STUDY ON THE LOW EMISSION WINDOW OF HOMOGENEOUS CHARGE COMPRESSION IGNITION DIESEL COMBUSTIONCombustion Science and Technology, 2007
- Modeling Diesel Spray Flame Liftoff, Sooting Tendency, and NOx Emissions Using Detailed Chemistry With Phenomenological Soot ModelJournal of Engineering for Gas Turbines and Power, 2005
- A fully coupled computational fluid dynamics and multi-zone model with detailed chemical kinetics for the simulation of premixed charge compression ignition enginesInternational Journal of Engine Research, 2005
- The application of a multicomponent droplet vaporization model to gasoline direct injection enginesInternational Journal of Engine Research, 2003
- ENTRAPMENT CHARACTERISTICS OF TRANSIENT GAS JETSNumerical Heat Transfer, Part A: Applications, 1996
- Turbulence Modeling of Internal Combustion Engines Using RNG κ-ε ModelsCombustion Science and Technology, 1995