Mechanical and Tribological Properties of Hybrid and Monolithic Reinforced Hypoeutectic Al–Si Matrix Composites
- 21 April 2024
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 26 (11)
Abstract
This study investigates the combined influence of Si element and reinforcing particles on the hardness and wear performance of aluminum matrix composites. The composites in focus include Fe‐based metallic glass (FMG) monolithic reinforced and FMG/SiC hybrid reinforced Al‐5 wt% Si matrix composites, fabricated through spark plasma sintering (SPS). A comprehensive investigation is carried out, encompassing the analysis of microstructural attributes and the examination of worn surfaces through field emission scanning electron microscopy (FESEM). Additionally, the study scrutinized two pivotal factors—hardness and density—recognizing their pivotal roles in determining the tribological performance of these composites. The experimental findings demonstrated the presence of an oxide protective layer on the worn surfaces of all specimens. Although, FMG/SiC hybrid reinforced Al‐5 wt% Si matrix composite possessed the highest hardness value, the best tribological performance is observed in Si‐bearing monolithic reinforced composite. The addition of Si to the matrix of monolithic reinforced composite facilitates improved densification behavior and enhances the distribution of reinforcing particles, resulting in a more stable and protective oxide layer in this specific sample. Furthermore, the study identifies a transition in the operative wear mechanisms from delamination to mild abrasion and adhesion with the inclusion of Si element.Keywords
This publication has 56 references indexed in Scilit:
- Spark plasma sintering of Al2O3/SiCw ceramic end mill: Grain growth kinetics, mechanical properties and cutting performanceCeramics International, 2023
- Solutionizing Temperature Effect on the Dry Sliding Wear Performance of Al-7Si-0.3Mg-3Ni Hypoeutectic AlloySilicon, 2023
- Influence of T6 Heat Treatment Analysis on the Tribological Behaviour of Cast Al-12.2Si-0.3 Mg-0.2Sr Alloy Using Response Surface MethodologyJournal of Bio- and Tribo-Corrosion, 2021
- Fe-based metallic glass particles reinforced Al-7075 matrix composites prepared by spark plasma sinteringAdvanced Powder Technology, 2020
- Carbon Nanotube‐Reinforced Aluminum Matrix CompositesAdvanced Engineering Materials, 2019
- Effects of ZrC content and mechanical alloying on the microstructural and mechanical properties of hypoeutectic Al-7 wt.% Si composites prepared by spark plasma sinteringCeramics International, 2019
- Tribo-Surface Characteristics and Wear Behaviour of SiC@r-GO/Mg Composite Worn under Varying Control FactorSilicon, 2019
- Microstructures and Properties of the Copper‐Coated SiCp Reinforced Al–Si Alloy CompositesAdvanced Engineering Materials, 2017
- Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser meltingActa Materialia, 2016
- Modification of eutectic Si in Al–Si alloys with Eu additionActa Materialia, 2015