Mohammad Reza Rezaei
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Mohammad Reza Rezaei has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
A. Albooyeh
School of Engineering, Damghan University, Damghan, Iran
2 shared publicationsF. Ghafari Golafshani
Bachelor of Science, School of Engineering, Damghan University, Damghan, Iran
2 shared publicationsH. Vafaeenezhad
2 shared publicationsReza Nazemnezhad
School of Engineering, Damghan University, Damghan, Iran
2 shared publications- Reza Nazemnezhad
Damghan University
2 shared publications - Saeed Ghodratnama Shabestari
School of Metallurgy and Materials Engineering, Iran University of Science and Technology (IUST), Tehran, Iran
2 shared publications
Latest Publications
- Open Access
- 5 November 2026
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 45, 7464-7478
Mechanical properties, densification behavior and strengthening mechanisms of Al2MnFeCrTi0.25 high entropy alloy reinforced aluminum matrix composites
- 5 November 2026
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 45, 7464-7478
Open AccessMechanical properties, densification behavior and strengthening mechanisms of Al2MnFeCrTi0.25 high entropy alloy reinforced aluminum matrix composites
- Open Access
- 1 January 2026
- Published by Academic World Research in Journal of Advanced Materials In Engineering
- Vol. 45 (3) , 53-68
Synthesis, Microstructural Characterization, and Mechanical Properties of a Layered Hybrid Aluminum-Matrix Composite Containing SiC Reinforcements and Iron-Based Amorphous Particles
Introduction and Objectives: One effective approach for enhancing the mechanical properties of metal matrix composites is the design of architected layered heterogeneous structures. Hence, the present study aimed to develop aluminum matrix hybrid composites reinforced with SiC ceramic particles and iron-based amorphous particles, featuring a heterogeneous layered architecture and to investigate their mechanical properties.Materials and Methods: The heterogeneous structure comprised alternating layers of pure aluminum and composite material with varying thicknesses, fabricated via powder metallurgy using spark plasma sintering (SPS). The microstructural and phase characteristics of the composites were investigated using scanning electron microscopy (SEM), optical microscopy (OM), and X-ray diffraction (XRD). The relationship between microstructure and mechanical properties was subsequently analyzed.Results: Microstructural analyses, including porosity evaluation and density measurements, demonstrated enhanced densification during sintering with increasing pure aluminum layer thickness. In addition, the distribution of reinforcement particles was improved by increasing the volume fraction of the pure aluminum layers relative to the composite layers. Phase analysis of all sintered samples confirmed the preservation of the amorphous nature of the iron-based reinforcement particles and revealed no evidence of interfacial reaction products at the reinforcement–matrix interfaces. Mechanical experiments showed a favorable combination of high strength and ductility, with a compressive strength of up to 191 MPa and a fracture strain of 20% in samples with a higher volume fraction of composite layers. Furthermore, increased ductility was observed with a higher volume fraction of pure aluminum layers.Conclusion: The introduction of a layered heterogeneous architecture in the hybrid composite, through modification of consolidation behavior and reinforcement particle distribution, resulted in superior mechanical properties compared to those of the homogeneous composite.
- 1 January 2026
- Published by Academic World Research in Journal of Advanced Materials In Engineering
- Vol. 45 (3) , 53-68
Open AccessSynthesis, Microstructural Characterization, and Mechanical Properties of a Layered Hybrid Aluminum-Matrix Composite Containing SiC Reinforcements and Iron-Based Amorphous Particles
Introduction and Objectives: One effective approach for enhancing the mechanical properties of metal matrix composites is the design of architected layered heterogeneous structures. Hence, the present study aimed to develop aluminum matrix hybrid composites reinforced with SiC ceramic particles and iron-based amorphous particles, featuring a heterogeneous layered architecture and to investigate their mechanical properties.Materials and Methods: The heterogeneous structure comprised alternating layers of pure aluminum and composite material with varying thicknesses, fabricated via powder metallurgy using spark plasma sintering (SPS). The microstructural and phase characteristics of the composites were investigated using scanning electron microscopy (SEM), optical microscopy (OM), and X-ray diffraction (XRD). The relationship between microstructure and mechanical properties was subsequently analyzed.Results: Microstructural analyses, including porosity evaluation and density measurements, demonstrated enhanced densification during sintering with increasing pure aluminum layer thickness. In addition, the distribution of reinforcement particles was improved by increasing the volume fraction of the pure aluminum layers relative to the composite layers. Phase analysis of all sintered samples confirmed the preservation of the amorphous nature of the iron-based reinforcement particles and revealed no evidence of interfacial reaction products at the reinforcement–matrix interfaces. Mechanical experiments showed a favorable combination of high strength and ductility, with a compressive strength of up to 191 MPa and a fracture strain of 20% in samples with a higher volume fraction of composite layers. Furthermore, increased ductility was observed with a higher volume fraction of pure aluminum layers.Conclusion: The introduction of a layered heterogeneous architecture in the hybrid composite, through modification of consolidation behavior and reinforcement particle distribution, resulted in superior mechanical properties compared to those of the homogeneous composite.
- Open Access
- 1 April 2025
- Published by Apex Publishing in Health Science Monitor
- Vol. 4 (2) , 82-91
Investigating the relationship between a sense of neighborhood belonging and social participation among Yazd residents: A cross-sectional study
Background & Aims: Social participation is a key strategy for promoting health and can greatly impact individual health outcomes. This study explores the relationship between the sense of neighborhood belonging and social participation among residents of Yazd city. Materials & Methods: A cross-sectional descriptive correlational study was conducted in 2023 among 20 ...
- 1 April 2025
- Published by Apex Publishing in Health Science Monitor
- Vol. 4 (2) , 82-91
Open AccessInvestigating the relationship between a sense of neighborhood belonging and social participation among Yazd residents: A cross-sectional study
Background & Aims: Social participation is a key strategy for promoting health and can greatly impact individual health outcomes. This study explores the relationship between the sense of neighborhood belonging and social participation among residents of Yazd city. Materials & Methods: A cross-sectional descriptive correlational study was conducted in 2023 among 20 ...
- 21 April 2024
- Published by Wiley in Advanced Engineering Materials
- Vol. 26 (11)
Mechanical and Tribological Properties of Hybrid and Monolithic Reinforced Hypoeutectic Al–Si Matrix Composites
This study investigates the combined influence of Si element and reinforcing particles on the hardness and wear performance of aluminum matrix composites. The composites in focus include Fe‐based metallic glass (FMG) monolithic reinforced and FMG/SiC hybrid reinforced Al‐5 wt% Si matrix composites, fabricated through spark plasma sintering (SPS). A comprehensive investigation is carried out, encompassing the analysis of microstructural attributes and the examination of worn surfaces through field emission scanning electron microscopy (FESEM). Additionally, the study scrutinized two pivotal factors—hardness and density—recognizing their pivotal roles in determining the tribological performance of these composites. The experimental findings demonstrated the presence of an oxide protective layer on the worn surfaces of all specimens. Although, FMG/SiC hybrid reinforced Al‐5 wt% Si matrix composite possessed the highest hardness value, the best tribological performance is observed in Si‐bearing monolithic reinforced composite. The addition of Si to the matrix of monolithic reinforced composite facilitates improved densification behavior and enhances the distribution of reinforcing particles, resulting in a more stable and protective oxide layer in this specific sample. Furthermore, the study identifies a transition in the operative wear mechanisms from delamination to mild abrasion and adhesion with the inclusion of Si element.
- 21 April 2024
- Published by Wiley in Advanced Engineering Materials
- Vol. 26 (11)
Mechanical and Tribological Properties of Hybrid and Monolithic Reinforced Hypoeutectic Al–Si Matrix Composites
This study investigates the combined influence of Si element and reinforcing particles on the hardness and wear performance of aluminum matrix composites. The composites in focus include Fe‐based metallic glass (FMG) monolithic reinforced and FMG/SiC hybrid reinforced Al‐5 wt% Si matrix composites, fabricated through spark plasma sintering (SPS). A comprehensive investigation is carried out, encompassing the analysis of microstructural attributes and the examination of worn surfaces through field emission scanning electron microscopy (FESEM). Additionally, the study scrutinized two pivotal factors—hardness and density—recognizing their pivotal roles in determining the tribological performance of these composites. The experimental findings demonstrated the presence of an oxide protective layer on the worn surfaces of all specimens. Although, FMG/SiC hybrid reinforced Al‐5 wt% Si matrix composite possessed the highest hardness value, the best tribological performance is observed in Si‐bearing monolithic reinforced composite. The addition of Si to the matrix of monolithic reinforced composite facilitates improved densification behavior and enhances the distribution of reinforcing particles, resulting in a more stable and protective oxide layer in this specific sample. Furthermore, the study identifies a transition in the operative wear mechanisms from delamination to mild abrasion and adhesion with the inclusion of Si element.
- 2 January 2024
- Published by Taylor & Francis in Tribology Transactions
- Vol. 67 (1) , 129-140
Comparative Analysis of Tribological Behavior in Aluminum Matrix Composites Incorporating Fe 75 Si 15 Zr 5 B 5 Metallic Glass and SiC Particles
- 2 January 2024
- Published by Taylor & Francis in Tribology Transactions
- Vol. 67 (1) , 129-140
Comparative Analysis of Tribological Behavior in Aluminum Matrix Composites Incorporating Fe 75 Si 15 Zr 5 B 5 Metallic Glass and SiC Particles
- 21 August 2023
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 309
Effects of the Si element on the microstructure and mechanical properties of an Al/FMG/SiC hybrid composite
- 21 August 2023
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 309
Effects of the Si element on the microstructure and mechanical properties of an Al/FMG/SiC hybrid composite
- 18 March 2023
- Published by Springer Nature in Silicon
- Vol. 15 (11) , 4967-4978
Effect of Matrix Particle Size on Densification Behavior, Microstructure, and Mechanical Properties of an Al/FMG/SiC Hybrid Composite
- 18 March 2023
- Published by Springer Nature in Silicon
- Vol. 15 (11) , 4967-4978
Effect of Matrix Particle Size on Densification Behavior, Microstructure, and Mechanical Properties of an Al/FMG/SiC Hybrid Composite
- Open Access
- 18 January 2023
- Published by Springer Nature in Research Square
Effect of matrix particle size on densification behavior, microstructure and mechanical properties of an Al/FMG/SiC hybrid composite
Hybrid aluminum matrix composites reinforced with Fe-based metallic glass (FMG) and SiC particles were prepared using the spark plasma sintering (SPS) process, and the effect of matrix particle size on density, microstructure, and mechanical properties was investigated. The porosity content of the composites increased with increasing matrix particle size. Both reinforcing particles showed a more homogenous distribution in the matrix when smaller particles were used for the matrix of the composites. The phase properties and the stored dislocation density were not meaningfully affected by changing matrix particle size. The yield compressive strength and ductility of the composites decreased significantly with increasing particle size, so that the yield strength of the hybrid composite with a matrix particle size of 20 μm was about 80% higher than that of a similar composite with a matrix particle size of 63 μm.
- 18 January 2023
- Published by Springer Nature in Research Square
Open AccessEffect of matrix particle size on densification behavior, microstructure and mechanical properties of an Al/FMG/SiC hybrid composite
Hybrid aluminum matrix composites reinforced with Fe-based metallic glass (FMG) and SiC particles were prepared using the spark plasma sintering (SPS) process, and the effect of matrix particle size on density, microstructure, and mechanical properties was investigated. The porosity content of the composites increased with increasing matrix particle size. Both reinforcing particles showed a more homogenous distribution in the matrix when smaller particles were used for the matrix of the composites. The phase properties and the stored dislocation density were not meaningfully affected by changing matrix particle size. The yield compressive strength and ductility of the composites decreased significantly with increasing particle size, so that the yield strength of the hybrid composite with a matrix particle size of 20 μm was about 80% higher than that of a similar composite with a matrix particle size of 63 μm.
- 15 June 2022
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 56 (17) , 2779-2788
Effect of the spark plasma sintering temperature on the microstructure and mechanical properties of a ceramic/metallic glass reinforced hybrid composite
In this investigation, hybrid aluminum matrix composites reinforced with Fe-based metallic glass (FMG) and SiC particles were synthesized using spark plasma sintering (SPS) at different sintering temperatures. The effects of sintering temperature on densification, phases, microstructure, and mechanical properties of the composites were evaluated. The findings indicate that the density of the sintered samples improved with increasing the sintering temperature. The X-ray diffraction results showed no remarkable difference in the phases of the samples sintered at different temperatures; only some small structural changes occurred in the metallic glass reinforcements. The sintering temperature had a significant effect on mechanical properties. For example, the hybrid aluminum matrix composite reinforced with 3 vol% FMG and 7 vol% SiC sintered at 550°C exhibited the ultimate compressive strength of 494 MPa, which is about 47% higher than the same composite sintered at 450°C.
- 15 June 2022
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 56 (17) , 2779-2788
Effect of the spark plasma sintering temperature on the microstructure and mechanical properties of a ceramic/metallic glass reinforced hybrid composite
In this investigation, hybrid aluminum matrix composites reinforced with Fe-based metallic glass (FMG) and SiC particles were synthesized using spark plasma sintering (SPS) at different sintering temperatures. The effects of sintering temperature on densification, phases, microstructure, and mechanical properties of the composites were evaluated. The findings indicate that the density of the sintered samples improved with increasing the sintering temperature. The X-ray diffraction results showed no remarkable difference in the phases of the samples sintered at different temperatures; only some small structural changes occurred in the metallic glass reinforcements. The sintering temperature had a significant effect on mechanical properties. For example, the hybrid aluminum matrix composite reinforced with 3 vol% FMG and 7 vol% SiC sintered at 550°C exhibited the ultimate compressive strength of 494 MPa, which is about 47% higher than the same composite sintered at 450°C.