Injection vs. Oil Bath Lubrication Impact on Power Loss and Thermal Behaviour in an FZG Test Rig
Authors:
- Khadija BoujallabiaKBKhadija Boujallabia
- Büşra DuranBDBüşra Duran
- Jerome CavoretJCJerome Cavoret
- Thibaut TorresTTThibaut Torres
- Christophe ChangenetCCChristophe Changenet
- Fabrice VilleFabrice Ville
Preprint
- 1 April 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
This paper presents the results of a comparative analysis between injection and oil bath lubrication methods. This study is based on experimental results obtained using an FZG test rig, with a focus on the total power loss and thermal behaviour of the gears during the tests. An FZG machine was instrumented with thermocouple sensors at multiple critical locations, which include fixed and rotating parts. The gears were fitted with embedded thermocouple sensors, allowing the monitoring of the gear bulk temperature. This paper compares power loss and thermal behaviour of different key elements such as the oil and gear bulk temperatures under the two lubrication methods mentioned. The study reveals that, for this test bench, the power loss in the jet-lubrication configuration in the test box induced less power loss than oil bath lubrication. Various tests were conducted using a modified FZG machine with a Plexiglass® front and top panel on the test box to visualize and photograph the lubricant behaviour during the tests.Keywords
This publication has 14 references indexed in Scilit:
- Injection lubrication for high-speed helical gears using the overset mesh method and experimental verificationTribology International, 2022
- Experimental Investigations About the Power Loss Transition Between Churning and Windage for Spur GearsJournal of Tribology, 2020
- Torque loss in FZG-A10 gears lubricated with axle oilsTribology International, 2019
- On windage losses in high-speed pinion-gear pairsMechanism and Machine Theory, 2019
- Churning power losses of a gearbox with spiral bevel geared transmissionTribology International, 2019
- Assessing the energy efficiency of gear oils via the FZG test machineTribology International, 2009
- Influence of immersion depth of dip lubricated gears on power loss, bulk temperature and scuffing load carrying capacityInternational Journal of Mechanics and Materials in Design, 2007
- A Model for the Prediction of Churning Losses in Geared Transmissions—Preliminary ResultsJournal of Mechanical Design, 2006
- Fling-off cooling of gear teethTribology International, 1984
- TESTING PROCEDURES FOR GEAR LUBRICANTS WITH THE FZG TEST RIGIndustrial Lubrication and Tribology, 1974