Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Fabrice Ville has a total of 129 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Influential parameters in splash lubrication generated by a partially immersed rotating disc

    by William Rocher, Christophe Changenet, Yann Marchesse, Fabrice Ville

    Splash lubrication has been extensively investigated regarding churning losses. However, the highly chaotic nature of the projected flow still limits the ability to predict and to control lubricant distribution accurately, thereby restricting the optimisation of splash lubrication strategies. This paper presents an experimental study of the key parameters governing the flow projected by partially immersed rotating discs. Firstly, the experimental procedure is presented. Following this, an initial test campaign evaluates the effect of various parameters on the projected flow rate. A methodology is then introduced to quantitatively distinguish fluid entrainment and fluid projection. The results show that the existing model developed to predict oil projection for gears is not consistent with the experimental observations. This discrepancy is partly attributable to the physical formulation. A correction based on the theory describing flow near fully immersed rotating discs is therefore proposed. This modification significantly improves the model. Overall, the present study paves the way for more efficient and reliable lubrication systems by demonstrating how oil supply can be precisely controlled under splash lubrication conditions.

  • Open Access

    Predicting and Minimising Tooth Friction in Gear Transmissions: A Closed-Form Model of Load, Temperature, Speed, and Roughness

    by Maxence Bigerelle, Julie Lemesle, Eddy Chevallier, Yasser Diab, Thomas Touret, Christophe Changenet, Fabrice Ville

    Accurate modeling of the tooth friction coefficient is central to analyses of efficiency, vibration, and durability in enclosed gear drives. Physics-based models describe these contacts using a large set of coupled thermal, contact, and lubrication laws whose individual parameters have uncertainties that are difficult to propagate. This study proposes a compact alternative: the HAF model, a three-parameter phenomenological description of the friction coefficient as a function of the slide-to-roll ratio (SRR). The three parameters have distinct tribological interpretations: h (hysteresis) governs the steepness of the sigmoidal transition, a (attrition) governs the slope of the plateau, and ν (friction level) governs the overall magnitude. The model is calibrated using nonlinear regression with fourteen two-disc traction curves acquired with a one-factor-at-a-time (star) design around a reference operating point (1.6 GPa, 80 °C, and 20 m/s): the contact pressure (1.2, 1.6, and 1.9 GPa), the injection temperature (40, 80, and 100 °C), and the mean speed (10, 20, and 30 m/s) are each varied in turn, for both smooth and rough discs. Parameter uncertainty is quantified using the residual-resampling bootstrap (BIG) established in a companion paper and applied over 105 iterations; it yields near-Gaussian, weakly correlated parameter distributions. The three HAF parameters are then expressed as linear functions of load, temperature, speed, and roughness; least-squares inference across the fourteen conditions shows that eleven of the fifteen regression coefficients differ significantly from zero at the 5% level, with roughness having the strongest effect on the friction level (t = 7.98). Substituting these laws into the HAF equation and reoptimizing the resulting expression globally yields a single closed-form model that reproduces the measured friction coefficient with a residual spread of σ ≈ 0.001 in friction-coefficient units (R2 ≈ 0.996) and approximately Gaussian, zero-mean, and homoscedastic residuals with no evident systematic structure. Being differentiable and equipped with bootstrap confidence intervals, the model predicts friction throughout the tested operating envelope—across which the maximum friction coefficient varies by a factor of eight, from 0.0049 to 0.0388—and supports gradient-based optimization of low-friction operating conditions. The contribution of this study is a compact, interpretable, and statistically characterized predictive law for tooth friction, expressed in closed form as a function of the operating conditions and of the surface state.

  • Open Access

    Gear power transmissions in 2026: Current challenges and future perspectives from France

    by Fabrice Ville, Christophe Changenet, Emmanuel Rigaud, Benoit Jourdain, Thierry Grandgeorge, Etienne Bossy, Lucas Fourel, Berengere Guilbert, Andre Meyer, Jean-Philippe Noyel, et al.

    In academia, research on gear units is increasingly focused on electrification, higher rotational speeds, lightweight architectures and stricter efficiency and acoustic constraints. Advanced multiphysics modelling now incorporates contact mechanics, structural flexibility, lubrication, thermal behaviour and electromechanical coupling. Significant advances have been made in the fields of dynamics, vibroacoustic, Rolling Contact Fatigue modelling and coupled power losses and thermal analyses. Furthermore, numerical tools facilitate analyses at the system-level as opposed to the component level. Within the industrial sector, transmissions are required to demonstrate an increase in power density, durability and efficiency with reduced noise, a requirement that is particularly pertinent in the context of electric transmissions. At the same time, manufacturing trends include enhanced precision, surface superfinishing, dry machining and full digitalisation with digital twins. Health monitoring is evolving towards hybrid strategies. Sustainability considerations now influence materials, lubrication strategies, eco-design, repairability and life cycle optimisation. In the field of education, transmission engineering remains fundamental. It is evolving towards systemic, multiphysical and digital approaches. Study programmes are increasingly incorporating tribology, Noise, Vibration & Harshness, thermal modelling, durability prediction, optimisation and data-based monitoring, alongside close links between research laboratories and industry. Digital skills, simulation tools and interdisciplinary training are becoming essential. Overall, far from being a mature or declining field, gear transmission engineering is undergoing a profound transformation. Its future is driven by high-speed electrified systems, integrated modelling, predictive maintenance, sustainable design and enhanced collaboration between research, industry and education.

  • Open Access

    A Phenomenological Model with Bootstrap-Based Uncertainty Estimation for Friction Coefficient Prediction in Gear Transmissions

    by Maxence Bigerelle, Julie Lemesle, Eddy Chevallier, Yasser Diab, Thomas Touret, Christophe Changenet, Fabrice Ville

    This study investigates the correlations between the parameters of the Hysteresis-Attrition-Friction model (HAF), hysteresis (h), attrition (a), and friction coefficient (ν), under different surface conditions and contact pressures. The HAF model, a sigmoidal model developed in-house, provides a novel approach for characterizing tribological behaviour through its three key parameters (h, a, ν). The analysis employed a bootstrapping method to generate numerous parameter samples, allowing for the estimation of joint distributions and the identification of correlations between parameter pairs. The model here is applied to data from experiments conducted using both smooth and rough surface configurations at three distinct contact pressures: 1.2 GPa, 1.6 GPa, and 1.9 GPa. The results revealed a positive correlation between hysteresis and attrition across both surface types, indicating that higher energy dissipation through hysteresis is associated with increased friction. Conversely, negative correlations were found between hysteresis and friction coefficient, and between attrition and friction, suggesting a trade-off between energy dissipation and friction. The bivariate kernel density plots further highlighted these patterns, helping to visualize the complex relationships within the model. The results emphasize the importance of considering surface conditions and pressure when applying the HAF model to predict performance in tribological systems.


  • Injection vs. Oil bath lubrication impact on power loss and thermal behaviour in an FZG test rig

    by Khadija Boujallabia, Büşra Duran, Jérôme Cavoret, Thibaut Torres, Christophe Changenet, Fabrice Ville


  • Open Access

    Injection vs. Oil Bath Lubrication Impact on Power Loss and Thermal Behaviour in an FZG Test Rig

    by Khadija Boujallabia, Büşra Duran, Jerome Cavoret, Thibaut Torres, Christophe Changenet, Fabrice Ville

    This paper presents the results of a comparative analysis between injection and oil bath lubrication methods. This study is based on experimental results obtained using an FZG test rig, with a focus on the total power loss and thermal behaviour of the gears during the tests. An FZG machine was instrumented with thermocouple sensors at multiple critical locations, which include fixed and rotating parts. The gears were fitted with embedded thermocouple sensors, allowing the monitoring of the gear bulk temperature. This paper compares power loss and thermal behaviour of different key elements such as the oil and gear bulk temperatures under the two lubrication methods mentioned. The study reveals that, for this test bench, the power loss in the jet-lubrication configuration in the test box induced less power loss than oil bath lubrication. Various tests were conducted using a modified FZG machine with a Plexiglass® front and top panel on the test box to visualize and photograph the lubricant behaviour during the tests.

  • Influence of oil flow rate and rotational speed on load-independent power losses in an oil-jet lubricated planetary gear set

    by Marie Winger, Yann Marchesse, Thomas Touret, Fabrice Ville, Christophe Changenet, Patrice Gédin

    This paper focuses on the study of the load-independent power losses generated by a complete planetary gearbox having a rotating ring gear and a fixed planet carrier. First, different configurations are studied to characterize the various losses such as those associated to bearings. The power losses generated by the complete gearbox is then measured thanks to a dedicated test bench. Those tests enable to determine a power loss distribution that is then validated using a thermal network analysis. Once the windage and the oil churning losses are estimated, their evolution with rotational speed and oil flow rate is investigated. The study reveals that the windage power losses, generated by the reduced scale planetary gearbox studied, do not increase with the cube of the rotational speed within the tested speed range. The oil churning losses evolve linearly with the oil flow rate and quasi linearly with speed. Finally, the evolution of the power loss distribution with respect to the rotational speed is presented.

  • Friction of hybrid and steel ball bearings in mixed lubrication

    by Jeroen Wensing, Yasser Diab, Jerome Cavoret, Fabrice Ville, Benny Wemekamp

    Hybrid ball bearings with rolling elements made of silicon nitride show important friction, temperature, and power loss benefits compared to full steel bearings under mixed lubrication. This is of particular interest for electrical vehicle (EV) range extension in the automotive industry, where hybrid bearings are used in the electric motor with integrated gearbox to avoid electrical erosion damage. Same benefits can be obtained for industrial electric motors with high frequency variable speed drives where the hybrid bearing acts as an insulator against electrical currents. In this study bearing temperatures and system torque are measured in a modified FZG gearbox for both hybrid and steel ball bearings. The gear set was designed with a small helix angle to create an axial preload to the sets of 6306 deep groove ball bearings with C3 clearance. To reach mixed lubrication conditions, a small amount of low viscous oil was used operating at high temperatures up to a maximum of 100°C. Results in this study show that for mixed lubrication the hybrid bearings run 2-4°C cooler compared to steel ones, while the temperature gradient is similar. Due to lower friction in the hybrid bearings, the FZG test box efficiency is on average improved with 3%.

  • Influence of Oil Degradation on Power Losses and Thermal Behavior of a Gear Transmission Test Rig

    by Büşra Duran, Jérôme Cavoret, Yasser Diab, David Philippon, Fabrice Ville, Arnaud Ruellan, Frank Berens