Green rigid polyurethane foam from hydroxyl liquid natural rubbers as macro-hydroxyl polyols
- 1 March 2022
- journal article
- research article
- Published by SAGE Publications in Journal of Cellular Plastics
- Vol. 58 (3) , 555-568
Abstract
The novel renewable source precursors from hydroxyl liquid natural rubbers (HLNRs) with various secondary hydroxyl content of 22% (HLNR22), 35% (HLNR35), and 50% (HLNR50) (or naming macro-hydroxyl polyols) were used to prepare rigid polyurethane foam. The aim of this study was to investigate the effect of hydroxyl content of HLNR precursors and the ratio of HLNRs and commercial polyols on physico-mechanical properties of rigid polyurethane foams in comparison to foams made from commercial polyols. The increase in hydroxyl content of HLNRs resulted in the foams with larger cell size while the increase in the HLNR portion caused a small and more uniform cell size, which is related to their density and compressive strength. Thermal stability of polyurethane foams was analyzed by thermogravimetric analysis and the results have demonstrated that the use of HLNR polyols improved thermal stability of polyurethane foams in comparison to commercial foam.Keywords
Funding Information
- Thailand Research Fund (RDG5450001)
This publication has 33 references indexed in Scilit:
- Synthesis, characteristic, and properties of waterborne polyurethane based on natural rubberJournal of Applied Polymer Science, 2011
- Rigid polyurethane foams from a soybean oil-based PolyolPolymer, 2011
- Controlled degradation of natural rubber and modification of the obtained telechelic oligoisoprenes: Preliminary study of their potentiality as polyurethane foam precursorsJournal of Applied Polymer Science, 2010
- Polyurethane foams from soyoil‐based polyolsJournal of Applied Polymer Science, 2009
- Preparation and characterization of polyurethane foams using a palm oil-based polyolBioresource Technology, 2008
- Effect of foam density on the properties of water blown rigid polyurethane foamJournal of Applied Polymer Science, 2008
- Laboratory investigation of biodegradability of a polyurethane foam under anaerobic conditionsPolymer Degradation and Stability, 2007
- Rigid polyurethane–clay nanocomposite foams: Preparation and propertiesJournal of Applied Polymer Science, 2006
- Chemical degradation of epoxidized natural rubber using periodic acid: Preparation of epoxidized liquid natural rubberJournal of Applied Polymer Science, 2004
- An FT i.r. study of reaction kinetics and structure development in model flexible polyurethane foam systemsPolymer, 1996