Microstructural characteristics and mechanical properties of rotary friction-welded dissimilar AISI 431 steel/AISI 1018 steel joints
Open Access
- 1 January 2023
- journal article
- research article
- Published by Walter de Gruyter GmbH in Journal of the Mechanical Behavior of Materials
- Vol. 32 (1)
Abstract
The main objective of this study was to analyze the microstructural characteristics and strength performance of dissimilar AISI 431 steel/AISI 1018 steel joints developed using rotary friction welding. The microstructural characteristics of different regions of dissimilar rod-to-plate joints were analyzed using optical microscopy. The tensile properties and microhardness of dissimilar rod-to-plate joints were evaluated to assess the joint performance. The microhardness distribution across the cross-sectional region of dissimilar rod-to-plate joints was recorded and correlated with the tensile failure. Scanning electron microscopy was used to analyze the fractured region of dissimilar rod-to-plate tensile specimens. Results showed that the dissimilar AISI 431 steel/AISI 1018 steel joints steel exhibited a tensile strength of 650 MPa, a yield strength of 452 MPa, and a % elongation of 18%. The microhardness of the weld interface (WI) was higher up to 515 HV 0.5 . The grain growth and resulting lower hardness in heat-affected zone (HAZ) are mainly responsible for the failure of the joints in HAZ only. The superior tensile properties and greater interface hardness of dissimilar AISI 431 steel/AISI 1018 steel joints are correlated with the evolution of finer grain microstructure in the WI zone.Keywords
This publication has 24 references indexed in Scilit:
- A comparison between friction stir welding, linear friction welding and rotary friction weldingAdvances in Manufacturing, 2016
- Linear and rotary friction welding reviewInternational Materials Reviews, 2016
- Microstructure characterization and properties of carbon steel to stainless steel dissimilar metal joint made by friction weldingMaterials & Design, 2015
- Joining of dissimilar materialsCIRP Annals, 2015
- Mechanical and Microstructural Properties of Friction Welded AISI 304 Stainless Steel to AISI 1060 Steel AISI 1060Archives of Metallurgy and Materials, 2014
- Investigation on AISI 304 austenitic stainless steel to AISI 4140 low alloy steel dissimilar joints by gas tungsten arc, electron beam and friction weldingMaterials & Design (1980-2015), 2011
- Advances in friction welding process: A reviewScience and Technology of Welding and Joining, 2010
- Welding of AA1050 Aluminum with AISI 304 stainless steel by rotary friction welding processJournal of Aerospace Technology and Management, 2010
- Influence of post-weld heat treatments on microstructure and mechanical properties of AISI 431 martensitic stainless steel friction weldsMaterials Science and Technology, 2008
- Joining of Al 6061 alloy to AISI 1018 steel by combined effects of fusion and solid state weldingInternational Journal of Machine Tools and Manufacture, 2004