SMA, GTA and P-GMA dissimilar weld joints of 304LN stainless steel to HSLA steel; Part-2: hot corrosion kinetics
- 17 July 2018
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 5 (9) , 096503
Abstract
A study of hot corrosion kinetics of dissimilar weld joints of 304LN austenitic stainless steel and HSLA steel, which are welded by commonly used arc welding processes such as P-GMAW (pulsed current gas metal arc welding), GTAW (tungsten inert gas welding), and SMAW (shielded metal arc welding), has been conducted. The joints were then exposed to a molten salt environment of K2SO4 + NaCl (50%) at 923 K (650 oC) under cyclic conditions, that is, 1 hr of heating and subsequently 20min of cooling. A gravimetric analysis was conducted and it was observed that salt-coated samples follow a parabolic rate law. SEM/EDAX, XRD, and line mapping were used to systematically characterize the resulting oxide scale in the dissimilar weld joints. The influence of the molten salt environment on the hot corrosion behavior of dissimilar welded specimens is also discussed. From the hot corrosion studies, it was concluded that the longer the duration of exposure to molten salt, the higher the weight gain by the weldment.Keywords
This publication has 21 references indexed in Scilit:
- Assembling of thick-section HSLA steel with one seam per layer multi-pass PC-GMA welding producing superior qualityJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2017
- GTA pulsed current welding of thin sheets of SS304 producing superior quality of joint at high welding speedJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2017
- Characteristics of Extra Narrow Gap Weld of HSLA Steel Welded by Single-Seam per Layer Pulse Current GMA Weld DepositionJournal of Materials Engineering and Performance, 2017
- Influence of PC-GTAW Parameters on the Microstructural and Mechanical Properties of Thin AISI 1008 Steel JointsJournal of Materials Engineering and Performance, 2016
- Microstructure and corrosion characterization of the interfacial region in dissimilar friction stir welded AA5083 to AA7023Corrosion Science, 2016
- The impact of heat input on the strength, toughness, microhardness, microstructure and corrosion aspects of friction welded duplex stainless steel jointsJournal of Manufacturing Processes, 2015
- Influence of thermal characteristics on microstructure of pulse current GMA weld bead of HSLA steelThe International Journal of Advanced Manufacturing Technology, 2014
- An assessment of microstructure, mechanical properties and corrosion resistance of dissimilar welds between Inconel 718 and 310S austenitic stainless steelInternational Journal of Pressure Vessels and Piping, 2014
- Measurement of hot corrosion of 2.25Cr1Mo steel-347H steel welded joint in K2SO4NaCl mixtureMaterials Letters, 1994
- Observation of oscillating reaction rates during the isothermal oxidation of ferritic steelsOxidation of Metals, 1990