Performance of corroded bridge piers under cyclic loading
Authors:
- 1 December 2017
- journal article
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Bridge Engineering
- Vol. 170 (4) , 255-270
Abstract
The presence of chloride ions causes reinforced-concrete (RC) bridge piers in a corrosive environment to suffer from different degrees of corrosion damage. Investigation of the seismic performance of corroded RC bridge piers using cyclic loading is therefore of great value. In total, eight RC column pier specimens were experimentally investigated for their seismic performance and the influence of steel corrosion and axial repeated loading on that performance. It was demonstrated that corrosion had a significant influence on yield strength and ultimate load-bearing capacity of the column piers. Compared with non-corroded specimens, the load-bearing capacity was 18·27% lower when the corrosion of the longitudinal steel bar was 7·16%. Axial repeated loading had no significant influence on mechanical properties of the piers. Finite-element analysis was conducted to assess the effect of different parameters on the seismic performance of the piers, including concrete strength, longitudinal reinforcement ratio, axial compression ratio, height of column and stirrup ratio. As the ratio of axial compression stress to the strength was increased from 0·1 to 0·4, the maximum load-bearing capacity was increased by 27·3% from 55 kN to 70 kN. However, the ultimate displacement was significantly decreased by 42·9% from 35 mm to 20 mm.Keywords
This publication has 41 references indexed in Scilit:
- Seismic Behavior of Corroded RC Bridges: Review and Research GapsInternational Journal of Corrosion, 2016
- Corrosion initiation in cracked fibre reinforced concrete: Influence of crack width, fibre type and loading conditionsCorrosion Science, 2015
- Tensile properties of corroded embedded steel bars B500c in concreteInternational Journal of Structural Integrity, 2013
- Lifetime seismic performance of concrete bridges exposed to corrosionStructure and Infrastructure Engineering, 2013
- Concrete cover cracking caused by steel reinforcement corrosionMagazine of Concrete Research, 2011
- Consequences of steel corrosion on the ductility properties of reinforcement barConstruction and Building Materials, 2008
- Mechanical behavior of corroded reinforcing steel bars S500s tempcore under low cycle fatigueConstruction and Building Materials, 2007
- Effect of degree of corrosion on the properties of reinforcing steel barsConstruction and Building Materials, 2001
- Mechanical behaviour of corroded reinforced concrete beams—Part 1: Experimental study of corroded beamsMaterials and Structures, 2000
- Effect of Reinforcement Corrosion on Flexural Behavior of Concrete SlabsJournal of Materials in Civil Engineering, 1996