Abstract
Ivan Hevko, Professor, Doctor of Science, Professor of the Automobile Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0001-5170-0857, e-mail: gevkoivan1@ukr.net Roman Rohatynskyi, Professor, Doctor of Science, Professor of the Automobile Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0001-8536- 4599, e-mail: rogatynskyi@gmail.com Oleg Lyashuk, Professor, Doctor of Science, Professor of the Automobile Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0003-4881-8568, e-mail: oleglashuk@ukr.net Mykhailo Pylypets, Professor, Doctor of Science, Professor of the Mechanical Engineering Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000- 0002-4286-9324, e-mail: pulupecmi@gmail.com Igor Tkachenko, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of the Mechanical Engineering Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0002-3029-4578, e-mail: tkachenkoigor61@gmail.com Kostiantyn Buravchenko, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of the Mechanical Engineering Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0001-7965-4784, e-mail: rkomar@ukr.net The technological design of individual methods of winding broadband helical spirals is characterized by a number of design, technological and production problems that require systematic understanding and effective solutions in each individual case. Solutions related to solving problems in the process of manufacturing broadband helical coils include finding possible solutions to reduce energy consumption, reducing the number of operations and reducing their duration, finding original methods of their manufacture, and calculating and selecting the most rational ones, minimizing tooling costs, effective selection of materials depending on the design requirements and operating conditions. Also, an important factor in the manufacture of broadband helical spirals, especially in single and small-scale production, is ensuring the necessary accuracy of the parameters of their geometric surfaces, since these surfaces have a rather complex spatial shape, and this requires the use of specialized high-precision equipment and tools. Another important problem in the manufacture of broadband helical spirals is ensuring their appropriate mechanical properties, such as wear resistance, strength, fatigue endurance. This sometimes requires the use of additional technological operations in the technological process, such as surface hardening of the outer contour of the spiral, heat treatment of the spiral, etc. Therefore, obtaining broadband helical spirals requires technological design of effective methods of their manufacture, which can ensure the production of these spirals with the required characteristics at minimal time, energy and other costs. The research is devoted to the technological design of methods for winding broadband helical spirals with a rotating sleeve. Broadband helical spirals are used in many technical systems to perform various technological operations. Classical methods of winding helical spirals involve forming them by winding the strip onto various types of frames by pressing it with forming rollers. However, for the production of wide-band helical spirals, methods of obtaining them using a rotating sleeve are more effective. These methods involve the forming process with the pressing of the workpiece along the outer contour with the clamping of the side surfaces. In this case, the inner surface of the screw workpiece, as a rule, is not involved in the forming process and does not touch the mandrel, forming rollers or rotating sleeve. This allows for a significant height of the winding tape and the production of wide-band helical spirals. Such methods are implemented using a rotating sleeve and are of two types: without calibration at the winding stage and with calibration at the winding stage. These methods of winding wide-band helical coils using a rotating sleeve can be implemented without or with strip pre-preparation. This preparation involves performing additional operations before winding, such as cutting out or cutting triangular or trapezoidal segments on the strip blank. Accordingly, when providing such variants of the method of obtaining broadband helical spirals, their height will increase significantly compared to classical analogues. For both types of substantiated methods of winding broadband helical spirals with a rotating sleeve, the basic design and technological parameters of their manufacturing process are determined and presented. Also, considerable attention is paid in the work to the analysis of structural materials and tools used in the manufacture of broadband helical spirals.