ІГІгор Богданович Гевко

Ігор Богданович Гевко

*This is an algorithmically generated author record based on publicly available information.

Ігор Богданович Гевко has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Аналіз та перспективи розвитку автотранспортних перевезень в Тернопільській області

    by Ів. Б. Гевко, М. Д. П’єНтак, В. О. Тесля, Б. Р. Гевко, Р. В. Хорошун, Т. Д. Навроцька, Іг.б. Гевко

    У статті проведено комплексне наукове дослідження сучасного стану та перспектив розвитку ринку автотранспортних перевезень у загальнодержавному та регіональному розрізах, зокрема Тернопільської області. На основі системного аналізу статистичних даних за період 2018–2025 років встановлено ключові закономірності трансформації вантажообігу та пасажирообігу в умовах динамічних економічних змін. Досліджено структурні особливості оновлення парку транспортних засобів Тернопільської області, зокрема виявлено специфічні періоди стрімкого зростання реєстрацій автобусів, вантажних автомобілів та сідлових тягачів, що суттєво відрізняються від середньоукраїнських показників. Особливу увагу приділено аналізу сегмента електричного транспорту, який демонструє стабільно високу динаміку росту та стає визначальним вектором екологізації галузі. Проаналізовано стан розвитку супутньої інфраструктури, зокрема мережі автозаправних станцій, як необхідної умови для забезпечення ефективного функціонування транспортної системи. За результатами дослідження обґрунтовано роль автомобільного транспорту як базового елемента логістичної стійкості регіону та визначено перспективні напрями підвищення загальної ефективності експлуатації транспортних засобів за рахунок технологічної модернізації галузі.

  • Open Access

    Проєктування трансформаційних контейнерів з метою ефективного перевезення габаритних вантажів автотранспортними засобами

    by Іван Богданович Гевко, Микола Ярославович Сташків, Тарас Анатолійович Довбуш, Михайло Генадійович Левкович, Ігор Богданович Гевко

    У межах дослідження реалізовано структурно-схемний синтез трансформаційних контейнерів. Із застосуванням методів морфологічного аналізу розроблено морфологічну таблицю ознак конструктивних елементів та сформовано модель механічної системи «Трансформаційний контейнер». На основі результатів експертного оцінювання ідентифіковано пріоритетні морфологічні ознаки, що визначають конфігурацію об’єкта. Систематизація зазначених ознак дозволила згенерувати низку варіантів конструкцій, зокрема з функціями вертикальної та горизонтальної трансформації. Такі технічні рішення забезпечують можливість ефективного транспортування габаритних вантажів або спеціальної техніки в закритому (маскованому) стані з використанням автотранспортних засобів. Також в роботі проведено дослідження напружено-деформованого стану трансформаційних контейнерів яке показало, що рівень напружень у розгорнутому стані контейнера сягає сотень МПа, що на порядок перевищує показники у складеному стані. З метою підвищення жорсткості та несучої здатності конструкції обґрунтовано необхідність інтеграції додаткових елементів жорсткості (перемичок). Зокрема, для розсувного контейнера з габаритними розмірами 5х2х1м встановлено доцільність встановлення додаткових перемичок у зонах четвертого та восьмого напрямних елементів. Це дозволяє оптимізувати розподіл внутрішніх зусиль та забезпечити надійність експлуатації системи при максимальних експлуатаційних навантаженнях.

  • Design of Transformation Trailers to Optimize Storage Space in Trucking Companies

    by Ivan Нevko, Oleg Lyashuk, Igor Нevko, Taras Dovbush, Roman Khoroshun

    Ivan Hevko, Professor, Doctor of Science, Professor of the Automobile Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0001-5170-0857, e-mail: gevkoivan1@ukr.net Oleg Lyashuk, Professor, Doctor of Science, Professor of the Automobile Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0003-4881-8568, e-mail: oleglashuk@ukr.net Taras Dovbush, Associate Professor, PhD in Technical Sciences (Candidate of Technical Sciences), Associate Professor of the Department of Technical Mechanics and Agricultural Machinery, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0002-8354-7276, e-mail: tarasdowbush@gmail.com Igor Hevko, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of the Department of Road Transport, Berezhany Professional College of the National University of Life Resources and Environmental Management of Ukraine, Berezhany, Ternopil Region, Ukraine, ORCID: https://orcid.org/0009-0007-1984-6822, e-mail: gevkoigor1@gmail.com Roman Khoroshun, PhD, Associate Professor of the Automobile Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0002-1862-7640, e-mail: roman_086@ukr.net The research is devoted to the design of transformation trailers for optimizing storage areas in motor transport enterprises. The study was conducted to find new designs of transformation trailers for motor vehicles that optimize their operational characteristics in accordance with current production and economic requirements, and their further calculation. Based on the generated alternatives, designs of transformation trailers were developed, which use the functionality of extension, rotation, and removal. As a result of the research, the design of a trailer for which a patent for a utility model of Ukraine with a sliding function was obtained, as well as a trailer with sliding and turning functions, for the design of which an application for a patent for a utility model of Ukraine was filed.


  • Technological Design of Methods for Winding Broadband Helical Coils With a Rotating Sleeve

    by Ivan Нevko, Roman Rohatynskyi, Oleg Lyashuk, Mykhailo Pylypets, Igor Tkachenko, Roman Komar

    Ivan Hevko, Professor, Doctor of Science, Professor of the Automobile Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0001-5170-0857, e-mail: gevkoivan1@ukr.net Roman Rohatynskyi, Professor, Doctor of Science, Professor of the Automobile Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0001-8536- 4599, e-mail: rogatynskyi@gmail.com Oleg Lyashuk, Professor, Doctor of Science, Professor of the Automobile Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0003-4881-8568, e-mail: oleglashuk@ukr.net Mykhailo Pylypets, Professor, Doctor of Science, Professor of the Mechanical Engineering Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000- 0002-4286-9324, e-mail: pulupecmi@gmail.com Igor Tkachenko, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of the Mechanical Engineering Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0002-3029-4578, e-mail: tkachenkoigor61@gmail.com Kostiantyn Buravchenko, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of the Mechanical Engineering Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0001-7965-4784, e-mail: rkomar@ukr.net The technological design of individual methods of winding broadband helical spirals is characterized by a number of design, technological and production problems that require systematic understanding and effective solutions in each individual case. Solutions related to solving problems in the process of manufacturing broadband helical coils include finding possible solutions to reduce energy consumption, reducing the number of operations and reducing their duration, finding original methods of their manufacture, and calculating and selecting the most rational ones, minimizing tooling costs, effective selection of materials depending on the design requirements and operating conditions. Also, an important factor in the manufacture of broadband helical spirals, especially in single and small-scale production, is ensuring the necessary accuracy of the parameters of their geometric surfaces, since these surfaces have a rather complex spatial shape, and this requires the use of specialized high-precision equipment and tools. Another important problem in the manufacture of broadband helical spirals is ensuring their appropriate mechanical properties, such as wear resistance, strength, fatigue endurance. This sometimes requires the use of additional technological operations in the technological process, such as surface hardening of the outer contour of the spiral, heat treatment of the spiral, etc. Therefore, obtaining broadband helical spirals requires technological design of effective methods of their manufacture, which can ensure the production of these spirals with the required characteristics at minimal time, energy and other costs. The research is devoted to the technological design of methods for winding broadband helical spirals with a rotating sleeve. Broadband helical spirals are used in many technical systems to perform various technological operations. Classical methods of winding helical spirals involve forming them by winding the strip onto various types of frames by pressing it with forming rollers. However, for the production of wide-band helical spirals, methods of obtaining them using a rotating sleeve are more effective. These methods involve the forming process with the pressing of the workpiece along the outer contour with the clamping of the side surfaces. In this case, the inner surface of the screw workpiece, as a rule, is not involved in the forming process and does not touch the mandrel, forming rollers or rotating sleeve. This allows for a significant height of the winding tape and the production of wide-band helical spirals. Such methods are implemented using a rotating sleeve and are of two types: without calibration at the winding stage and with calibration at the winding stage. These methods of winding wide-band helical coils using a rotating sleeve can be implemented without or with strip pre-preparation. This preparation involves performing additional operations before winding, such as cutting out or cutting triangular or trapezoidal segments on the strip blank. Accordingly, when providing such variants of the method of obtaining broadband helical spirals, their height will increase significantly compared to classical analogues. For both types of substantiated methods of winding broadband helical spirals with a rotating sleeve, the basic design and technological parameters of their manufacturing process are determined and presented. Also, considerable attention is paid in the work to the analysis of structural materials and tools used in the manufacture of broadband helical spirals.