Investigation on Mechanical Properties of a Carbon Paper Gas Diffusion Layer through a 3-D Nonlinear and Orthotropic Constitutive Model
Open Access
Abstract
The mechanical loads that gas diffusion layers (GDLs) withstand in polymer electrolyte membrane fuel cell (PEMFC) stacks are sensitive to the assembly and working conditions. The mechanical properties of GDLs mostly depend on their composition materials, microstructural characteristics, operation conditions, etc. An accurate and comprehensive understanding of the mechanical performance of GDLs is significant for predicting the stress distribution and improving the assembly technology of PEMFC stacks. This study presented a novel 3-D nonlinear and orthotropic constitutive model of a carbon paper GDL to represent the material stiffness matrix with its compressive, tensile, and shear properties. Numerical simulations were performed based on the 3-D constitutive model, and the proposed 3-D model was validated against the experimental data reported previously. It is found that the simulation results of the 3-D constitutive model show a good agreement with the experimental results. Besides, the novel 3-D nonlinear and orthotropic model was applied in the overall stress simulation of a simplified PEMFC unit cell, compared to a conventional 3-D linear and isotropic model, and the simulation results of the two models show a significant difference.Keywords
This publication has 51 references indexed in Scilit:
- A review of gas diffusion layer properties and water management in proton exchange membrane fuel cell systemInternational Journal of Energy Research, 2020
- Gas Diffusion Layers in Fuel Cells and Electrolysers: A Novel Semi-Empirical Model to Predict Electrical Conductivity of Sintered Metal FibresEnergies, 2019
- Novel electrospun gas diffusion layers for polymer electrolyte membrane fuel cells: Part I. Fabrication, morphological characterization, and in situ performanceJournal of Power Sources, 2017
- Measurement of effective bulk and contact resistance of gas diffusion layer under inhomogeneous compression – Part II: Thermal conductivityJournal of Power Sources, 2016
- Mechanisms and effects of mechanical compression and dimensional change in polymer electrolyte fuel cells – A reviewJournal of Power Sources, 2015
- Fabrication of carbon papers using polyacrylonitrile fibers as a binderJournal of Materials Science, 2014
- A review of gas diffusion layer in PEM fuel cells: Materials and designsInternational Journal of Hydrogen Energy, 2012
- Effect of Temperature on In-Plane Permeability of the Gas Diffusion Layer of PEM Fuel CellECS Transactions, 2011
- Effect of a GDL based on carbon paper or carbon cloth on PEM fuel cell performanceFuel, 2011
- Review and analysis of PEM fuel cell design and manufacturingJournal of Power Sources, 2003