A Comprehensive Methodology to Evaluate Losses and Process Variations in Silicon Solar Cell Manufacturing
- 5 August 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 9 (5) , 1350-1359
Abstract
Novel, high-throughput metrology methods are used in this paper for detailed performance loss analysis of approximately 400 industrial crystalline silicon solar cells, all coming from the same production line. The characterization sequence combines traditional global cell measurements (e.g., current–voltage, Suns- ${V}_{\text{OC}}$ ) with camera-based cell imaging of voltage distribution and power dissipation from photoluminescence and lock-in thermography, respectively. Spatial variations in current collection are visualized using a high-speed external quantum efficiency and reflectance measurement technique. A nondestructive transfer length method (TLM) measurement technique is also implemented, featuring circular TLM structures hidden within the busbars of the cells. The variance of individual loss parameters and their impact on cell performance are quantified for this large group of cells. Based on correlations performed across parameters, recombination losses in the bulk and rear surface of the cell are shown to be the primary limiting factor for the cell efficiency. The nature of these distributions and correlations provide important insights about loss mechanisms in industrial solar cells, helping to prioritize efforts for optimizing the performance of the production line. Additionally, many of the parameters extracted from these techniques can be tied back to incoming material quality issues (e.g., poor bulk carrier lifetime, nonuniform wafer doping) and to individual unit processes (e.g., texturing, phosphorus diffusion, silicon nitride deposition, metallization), allowing the data to be used directly for process control in manufacturing. All of the datasets are made available for download.Keywords
Funding Information
- U.S. Department of Energy's Solar Energy Technologies Office (DE-EE-0008155)
This publication has 33 references indexed in Scilit:
- Improved local efficiency imaging via photoluminescence for silicon solar cellsSolar Energy Materials and Solar Cells, 2014
- Comparison of DLIT- and PL-based Local Solar Cell Efficiency AnalysisEnergy Procedia, 2013
- Rating and sorting of mc-Si as-cut wafers in solar cell production using PL imagingSolar Energy Materials and Solar Cells, 2012
- Fundamental Issues in Manufacturing Photovoltaic Modules Beyond the Current Generation of MaterialsAdvances in OptoElectronics, 2012
- A Combined Statistical and TCAD Model as a Method for Understanding and Reducing Variations in Multicrystalline Si Solar Cell ProductionEnergy Procedia, 2012
- Evaluating luminescence based voltage images of silicon solar cellsJournal of Applied Physics, 2010
- Influence of Defects on Solar Cell CharacteristicsSolid State Phenomena, 2009
- Reciprocity relation between photovoltaic quantum efficiency and electroluminescent emission of solar cellsPhysical Review B, 2007
- Spatially resolved series resistance of silicon solar cells obtained from luminescence imagingApplied Physics Letters, 2007
- High‐efficiency silicon solar cells: Full factor limitations and non‐ideal diode behaviour due to voltage‐dependent rear surface recombination velocityProgress in Photovoltaics: Research and Applications, 1993