Mechanostat-Informed Strain Mapping of Osseodensification-Inspired Peri-Implant Densification Versus Conventional Drilling in Osteoporotic-like Low-Density Cancellous Bone: A 3D Static Linear Finite Element Analysis
Open Access
- 18 March 2026
- journal article
- research article
- Published by MDPI AG in Journal of Functional Biomaterials
- Vol. 17 (3) , 149
Abstract
Low-density cancellous bone results in reduced trabecular support and may increase crestal cortical strain around implants. Osseodensification (OD) compacts trabecular bone and may create a peri-osteotomy densified zone, but its strain-level effects in osteoporotic-like bone are unclear. This study evaluated whether an OD-inspired peri-implant densified trabecular zone reduces crestal cortical strain compared with conventional drilling (CD) in an osteoporotic-like model. A three-dimensional finite element model of a mandibular posterior segment with a 2.0-mm cortical shell and D4 cancellous core was constructed with a 4.3 × 11.4-mm titanium implant and a cemented monolithic zirconia crown. CD used a 4.0-mm osteotomy in D4 bone. The OD model used the same osteotomy plus a concentric peri-implant densified shell with radial density gradation from D1 to D3. The implant–bone interface was defined as bonded. Static 100 N axial and 45° oblique loads were applied. Outcomes were εeq, εmax, and εmin, summarized as mean top-10 nodal values. OD reduced crestal cortical strains under both loads. Under axial loading, εeq, εmax, and |εmin| decreased by 17.7%, 19.0%, and 24.1%, respectively. Under oblique loading, the corresponding reductions were 9.8%, 8.0%, and 8.9%. Oblique loading produced higher cortical strains than axial loading in both models. OD-inspired peri-implant densification reduced crestal cortical strain in this osteoporotic-like model, whereas oblique loading remained the main driver of elevated strain. These findings support occlusal/prosthetic strategies that minimize oblique forces and warrant experimental and clinical validation.Keywords
All Related Versions
This publication has 48 references indexed in Scilit:
- The Effect of Osseodensification on Implant Stability and Marginal Bone Levels: A Randomized Control Clinical TrialClinical and Experimental Dental Research, 2025
- Do dental implants placed in patients with osteoporosis have higher risks of failure and marginal bone loss compared to those in healthy patients? A systematic review with meta-analysisClinical Oral Investigations, 2023
- Using Finite Element Modeling in Bone MechanoadaptationCurrent Osteoporosis Reports, 2023
- Effect of bone quality and quantity on the primary stability of dental implants in a simulated bicortical placementClinical Oral Investigations, 2020
- The effect of osseodensification drilling for endosteal implants with different surface treatments: A study in sheepJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2018
- Linear viscoelasticity - bone volume fraction relationships of bovine trabecular boneBiomechanics and Modeling in Mechanobiology, 2016
- Bone Volume Fraction and Fabric Anisotropy Are Better Determinants of Trabecular Bone Stiffness Than Other Morphological VariablesJournal of Bone and Mineral Research, 2014
- Bones' adaptive response to mechanical loading is essentially linear between the low strains associated with disuse and the high strains associated with the lamellar/woven bone transitionJournal of Bone and Mineral Research, 2012
- Bone's mechanostat: A 2003 updateThe Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology, 2003
- Bone “mass” and the “mechanostat”: A proposalThe Anatomical Record, 1987