Effect of Bond Thickness on Fracture Behaviour in Adhesive Joints
- 1 February 2001
- journal article
- research article
- Published by Taylor & Francis in The Journal of Adhesion
- Vol. 75 (1) , 27-44
Abstract
To study the effects of bond thickness on the fracture behaviour of adhesive joints, experimental investigation and finite element analysis have been carried out for compact tension (CT) and double-cantilever-beam (DCB) specimens with different bond thickness. Fractography and fracture toughness exhibited apparent variations with bond thickness. Numerical results indicate that the crack tip stress fields are affected by bond thickness due to the restriction of plastic deformation by the adherends. At the same J level, a higher opening stress was observed in the joint with a smaller bond thickness (h). Beyond the crack tip region, a self-similar stress field can be described by the normalized loading parameter, J/hσ0. The relationship between J and crack tip opening displacement, δ, is dependent on the bond thickness. The strong dependence of toughness upon bond thickness is a result of the competition between two different fracture mechanisms. For small bond thickness, toughness is linearly proportional to bond thickness due to the high constraint. After reaching a critical bond thickness, the toughness decreases with further increase of bond thickness due to the rapid opening (blunting) of the crack tip with loading. A simple model has been proposed to predict the variation of toughness with bond thickness.Keywords
This publication has 11 references indexed in Scilit:
- The influence of constraint on crack tip stress fields in strength mismatched welded jointsJournal of the Mechanics and Physics of Solids, 1998
- Mode-l Fracture Behaviour of Adhesive Joints. Part II. Stress Analysis and Constraint ParametersThe Journal of Adhesion, 1995
- Mode-l Fracture Behaviour of Adhesive Joints. Part I. Relationship Between Fracture Energy and Bond ThicknessThe Journal of Adhesion, 1995
- The stresses associated with a crack in a repair weldInternational Journal of Fracture, 1992
- Ductile failure of a constrained metal foilJournal of the Mechanics and Physics of Solids, 1991
- Micromechanics of Fracture in Structural Adhesive BondsThe Journal of Adhesion, 1989
- Relationships between the J-integral and the crack opening displacement for stationary and extending cracksJournal of the Mechanics and Physics of Solids, 1981
- The Fracture Resistance of a Toughened Epoxy AdhesiveThe Journal of Adhesion, 1981
- Effect of Temperature on the Adhesive Fracture Behavior of an Elastomer-Epoxy ResinThe Journal of Adhesion, 1976
- The fracture of epoxy- and elastomer-modified epoxy polymers in bulk and as adhesivesJournal of Applied Polymer Science, 1975