Syntactic foam composites of epoxy‐allyl phenol‐bismaleimide ternary blend—Processing and properties
- 11 June 2007
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 105 (6) , 3715-3722
Abstract
Syntactic foams based on a reactive polymer blend of Epoxy‐Allyl Phenol‐Bismaleimide were processed using hollow glass microballoons. The effect of microballoon concentration on the mechanical and thermophysical properties of the foam composites was investigated. The mechanical properties, specific strength, coefficient of linear expansion, and density of the foam composites showed decreasing trend with increase in microballoon concentration whereas the specific heat showed a marginal increase. The temperature dependence of the thermophysical properties revealed an increase in coefficient of linear expansion, whereas the specific heat was more or less insensitive to the test temperature. Syntactic foams of fixed filler loading (50% by weight) were processed using a blend of two types of microballoons of different shell thickness. The mechanical properties increased proportional to the concentration of the higher shell thickness microballoon. At moderate filler load microballoon breakage dominated the failure mode. The compositional dependency of the mechanical properties was corroborated by SEM analysis of the fracture surfaces. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007Keywords
This publication has 20 references indexed in Scilit:
- Characterization of epoxy syntactic foams by dynamic mechanical analysisJournal of Materials Science, 2006
- Microstructural failure modes in three-phase glass syntactic foamsJournal of Materials Science, 2006
- Specific properties and fracture toughness of syntactic foam: Effect of foam microstructuresComposites Science and Technology, 2005
- Flexural Behaviour of Fibre‐Reinforced Syntactic FoamsMacromolecular Materials and Engineering, 2005
- Manufacturing and failure mechanisms of syntactic foam under compression☆Composites Part A: Applied Science and Manufacturing, 2004
- Elastic behaviour of plain and fibre-reinforced syntactic foams under compressionMaterials Letters, 2004
- On the elastic behavior of syntactic foamsInternational Journal of Solids and Structures, 2001
- Processing and compressive strengths of syntactic foams with and without fibrous reinforcementsJournal of Applied Polymer Science, 2001
- Manufacture and compression properties of syntactic foamsComposites, 1993
- Syntactic polymer foams1986