Revisiting Corrosion Protection Mechanisms of a Steel Surface by Damaged Zinc-Rich Paints
- 7 April 2019
- journal article
- research article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 75 (7) , 756-770
Abstract
The evolution of corrosion products that develop within the scratched region of a 96 wt% zinc-rich paint exposed to continuous salt spray for 1,000 h has been investigated by both electrochemical and materials characterization techniques. Electrochemical impedance spectroscopy suggested the corrosion resistance of the scratch region increases with the length of exposure to the salt spray, with Raman spectroscopy indicating that this was due to the formation of zinc corrosion products over the exposed steel substrate. The experimental results revealed that the center of the scratch is under sacrificial protection, but the oxygen reduction reaction is inhibited on the steel surface at the scratch corners. Nevertheless, the steel at the corners of the scratch is under barrier protection for up to 168 h, due to the formation of a thin, but dense, layer of zinc corrosion products, as evidenced by the lack of iron corrosion products up to this time. Overall, the results suggest that mechanism is not simply a pure sacrificial protection followed by a pure barrier protection, but rather both mechanisms could occur at the same time, where sacrificial protection dominates in the scratch center and barrier protection dominates at the scratch corners until iron corrosion products appear, which is the point that the paint is unable to protect the scratch region fully.Keywords
This publication has 31 references indexed in Scilit:
- A Comparison of the Corrosion Response of Zinc-Rich Coatings with and Without Presence of Carbon Nanotubes Under Erosion and Corrosion ConditionsCorrosion, 2018
- Corrosion Assessment of Zinc-Rich Primers Containing Polyaniline and the Effect of Acid as a DopantCorrosion, 2018
- Fabrication and characterization of zinc-based superhydrophobic coatingsSurface and Coatings Technology, 2018
- Performance of a Magnesium-Rich Primer on Pretreated AA2024-T351 in Full Immersion: a Galvanic Throwing Power Investigation Using a Scanning Vibrating Electrode TechniqueJournal of the Electrochemical Society, 2018
- Electrochemical Diagnostic Cycle Testing of Magnesium and Magnesium Oxide-Pigmented Primers on AA2024-T351Corrosion, 2017
- Magnesium and Magnesium Oxide Primer on AA2024-T351: Assessment of Field PerformanceCorrosion, 2017
- Influence of Zinc Content and Chloride Concentration on the Corrosion Protection Performance of Zinc-Rich Epoxy Coatings Containing Carbon Nanotubes on Carbon Steel in Simulated Concrete Pore EnvironmentsCorrosion, 2016
- Finite Element Analysis of the Galvanic Couple Current and Potential Distribution between Mg and 2024-T351 in a Mg Rich Primer ConfigurationJournal of the Electrochemical Society, 2016
- Electrochemical impedance spectroscopy investigations of epoxy zinc rich coatings: Role of Zn content on corrosion protection mechanismElectrochimica Acta, 2010
- Zinc-rich powder coatings characterisation in artificial sea waterElectrochimica Acta, 2004