A new oval shaft, high performance, 2 pole line start synchronous reluctance machine for submersible pump applications
Authors:
- 1 February 2022
- journal article
- research article
- Published by SAGE Publications in International Journal of Applied Electromagnetics and Mechanics
- Vol. 70 (1) , 73-93
Abstract
In this paper, a 2 pole, 4 kW, 6 inches diameter line start synchronous reluctance machine (LS-SynRM) as a submersible water pump motor is designed and optimized with a new oval shaft structure. The aim is to improve the machine performance by widening the flux path on the rotor via narrowing down the shaft on the q-axis. This way a wider d-axis flux path is obtained, and accordingly, the d-axis inductance, the saliency ratio L d∕ L q, and the inductance difference L d– L q are increased. First, a set of structural analyses is carried out on a 7-flux barrier rotor in 3 stages: modal, harmonic, and static structural analyses. According to analysis results, the safe limit for the shaft size reduction is determined as 8 mm to avoid excessive deformations and undesired vibrations due to resonance. Later, the machine is optimized using Multi-Objective Differential Evolution (MODE) algorithm with a narrower shaft. The quality of the Pareto front solutions shows that the oval shaft machine is superior to the circular shaft machine in terms of efficiency, motor mass, and torque ripple. The maximum recorded efficiency improvement for the same size LS-SynRM is 4 points and the same size commercial induction machine is around 20 points.Keywords
This publication has 24 references indexed in Scilit:
- Analysis of Direct-On-Line Synchronous Reluctance Machine Start-Up Using a Magnetic Field DecompositionIEEE Transactions on Industry Applications, 2016
- Design of high efficiency line start permanent magnet motor for submersible pumps2016
- The Role of Pumps for Energy Consumption and Energy Saving2015
- Design of a line-start synchronous reluctance motor2013
- Mechanical Design Considerations for Conventionally Laminated, High-Speed, Interior PM Synchronous Machine RotorsIEEE Transactions on Industry Applications, 2004
- Design of synchronous reluctance motors with flux barriers using 2D-FEM2003
- Design optimisation of electric motorsby genetic algorithmsIEE Proceedings - Electric Power Applications, 1998
- Design of low-torque-ripple synchronous reluctance motorsIEEE Transactions on Industry Applications, 1998
- Differential Evolution – A Simple and Efficient Heuristic for global Optimization over Continuous SpacesJournal of Global Optimization, 1997
- Evolutionary Algorithms for Constrained Parameter Optimization ProblemsEvolutionary Computation, 1996