Effect of Sr on Microstructure and Strengthening Mechanism of Al-4.6Mg Alloy
Open Access
Abstract
The as-cast Al-4.6Mg alloy was subjected to deformation and sensitization–desensitization heat treatment, and then the microstructure and the enhancement mechanism of Sr were investigated by optical microscopy, scanning electron microscopy–energy-dispersive spectroscopy, electron backscatter diffraction, and transmission electron microscopy. The precipitation phases of Al-4.6Mg alloy were mainly β-Al3Mg2, Al6Mn, and Al6(Mn Cr), and the nanoscale precipitation phases were Al3Mn and Al11Mn4. The formation of β-Al3Mg2 was hindered by the addition of 0.1 wt.% Sr. In addition, the precipitate phase Al4Sr and the nano-sized precipitate phase τ-Al38Mg58Sr4 were uniformly distributed in the spherical matrix. The addition of Sr promoted the redissolution of Mg atoms in Al-4.6Mg alloy, increasing the solubility of Mg in the α-Al matrix from 4.7 wt.% to 5.1 wt.%. The microstructure analysis showed that Sr addition inhibited the recovery and recrystallization of the alloy because the Sr element elevated the recrystallization temperature. As a result, the grain deformation was intensified, the grain size was decreased from 6.96 μm to 5.39 μm, the low-angle grain boundaries were increased from 78.7 at % to 84.6 at %, and the high-angle grain boundaries were increased from 21.3 at % to 15.4 at %. Furthermore, the mechanical properties of the alloy were significantly improved, and the plasticity degraded after the addition of the Sr element. The yield strength of the alloy was enhanced mainly through fine grain strengthening, dispersion strengthening, solid solution strengthening, and working hardening. The strengthening mechanisms were analyzed in detail.Keywords
Funding Information
- Key research and development and transformation project of Qinghai Province (2021-GX-107)
This publication has 42 references indexed in Scilit:
- Microstructure evolution of a modified AA5083 aluminum alloy during a multistage homogenization treatmentMaterials Characterization, 2012
- Change of Rotated Cube Texture through Multi-processing in 3% Si-steelsISIJ International, 2009
- Size effect on the tensile strength of fine-grained copperScripta Materialia, 2008
- Single-crystal plasticity of the complex metallic alloy phase β-Al–MgIntermetallics, 2007
- Influence of Zr addition on the microstructure evolution and thermal stability of Al–Mg–Mn alloy processed by ECAP at elevated temperatureMaterials Science and Engineering: A, 2007
- Magnetism in Al(Si)-Mn Quasicrystals and Related PhasesPhysical Review Letters, 2000
- New Al–Mg–Sc alloysMaterials Science and Engineering: A, 2000
- Effect of preheat temperature on the orientation relationship of (Mn,Fe)Al6 precipitates in an AA 5182 Aluminium—Magnesium alloyActa Metallurgica et Materialia, 1995
- Influence of the magnesium concentration on the relationship between fracture mechanism and strain rate in high purity AlMg alloysMaterials Science and Engineering: A, 1994
- Hall-Petch Basis for Assessing Alloy StrengtheningMRS Proceedings, 1994