Wu Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Wu Li has a total of 71 co-authors. Here are the top co-authors by number of shared publications:
Yaping Dong
Key Laboratory of Comprehensive and Highly Efficient Utilization of Salt Lake Resources, Qinghai Institute of Salt Lakes, Chinese Academy of Sciences, Xining 810008, PR China; Qinghai Technology Research and Development Center of Comprehensive Utilization of Salt Lake Resources, Xining 810008, PR China
10 shared publicationsLi Dang
University of Chinese Academy of Sciences
8 shared publicationsXin Liu
Key Laboratory of Comprehensive and Highly Efficient Utilization of Salt Lake Resources, Qinghai Institute of Salt Lakes, Chinese Academy of Sciences, Xining, China
8 shared publicationsXueying Nai
Chinese Academy of Sciences
8 shared publicationsYa-Ping Dong
Key Laboratory of Comprehensive and Highly Efficient Utilization of Salt Lake Resources, Qinghai Institute of Salt Lakes, Chinese Academy of Sciences, Xining, People’s Republic of China
6 shared publicationsDonghai Zhu
Qinghai university
4 shared publications
Latest Publications
- Open Access
- 30 September 2024
- Published by MDPI AG in Magnetochemistry
- Vol. 10 (10) , 74
Facile Synthesis of Core-Shell Magnetic Iron Oxide@SiO2-NH2 Nanoparticles and Their Application in Rapid Boron Removal from Aqueous Solutions
In this study, amino-functionalized magnetic particles (iron oxide@SiO2-NH2) with core-shell structures were synthesized and evaluated for rapid boron removal from aqueous solutions. The results showed that the specific surface area of the iron oxide@SiO2-NH2 (131.24 m2⋅g−1) increased greatly compared to pure iron oxide (30.98 m2⋅g−1). The adsorption equilibrium was less than 2 h, with an adsorption capacity of 29.76 mg⋅g−1 at pH = 6 at 15 °C. The quasi-second-order kinetic model described the boron adsorption process well, and both the Langmuir and Freundlich models were suitable for characterizing the adsorption isotherms. The zeta potential and XPS analysis before and after adsorption revealed that the main adsorption mechanism was the hydrogen bonding formation between the terminal -NH2 groups of the adsorbent and the boric acid. In addition, the adsorbent still maintained a high adsorption performance after five adsorption–desorption cycles, which illustrated that the iron oxide@SiO2-NH2 may be a potential adsorbent for environmental boron removal treatment.
- 30 September 2024
- Published by MDPI AG in Magnetochemistry
- Vol. 10 (10) , 74
Open AccessFacile Synthesis of Core-Shell Magnetic Iron Oxide@SiO2-NH2 Nanoparticles and Their Application in Rapid Boron Removal from Aqueous Solutions
In this study, amino-functionalized magnetic particles (iron oxide@SiO2-NH2) with core-shell structures were synthesized and evaluated for rapid boron removal from aqueous solutions. The results showed that the specific surface area of the iron oxide@SiO2-NH2 (131.24 m2⋅g−1) increased greatly compared to pure iron oxide (30.98 m2⋅g−1). The adsorption equilibrium was less than 2 h, with an adsorption capacity of 29.76 mg⋅g−1 at pH = 6 at 15 °C. The quasi-second-order kinetic model described the boron adsorption process well, and both the Langmuir and Freundlich models were suitable for characterizing the adsorption isotherms. The zeta potential and XPS analysis before and after adsorption revealed that the main adsorption mechanism was the hydrogen bonding formation between the terminal -NH2 groups of the adsorbent and the boric acid. In addition, the adsorbent still maintained a high adsorption performance after five adsorption–desorption cycles, which illustrated that the iron oxide@SiO2-NH2 may be a potential adsorbent for environmental boron removal treatment.
- 26 April 2024
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 53 (25) , 10434-10445
Deciphering the structure and potassium-ion transport mechanism of potassium borate glass
Potassium borate glass has great potential as an ion transport material. The ion transport rate is closely related to the microstructure of the glass. However, the disorder and variations in boron and oxygen atom types in the glass structure pose challenges in the analysis of this complex glass structure. In this work, the structure of potassium borate glass was unveiled through the neutron diffraction method and ab initio molecular dynamics (AIMD) simulations. The B–O, K–O, and O–O atomic interactions, bond lengths, coordination numbers, cavity distribution, ring structure distributions and other detailed information in the microstructure of potassium borate glass were obtained. By comparing the structure and properties of potassium borate glass with those of crystals of similar components, it is found that the bond lengths of 3B–BO (BO, bridging oxygen), 4B–BO and 3B–NBO (NBO, non-bridging oxygen) are longer than those of corresponding crystals, so the structure of the boron–oxygen network is looser and the density is smaller than that of similar crystals. Moreover, we found a rule that in both borate glass and crystal, the increase of NBO shortened the length of the B–O bond, and the increase of 4B increased the length of the B–O bond. The key structures affecting the transport rate of K+ were NBO, chain structure units and cavities. This work will provide reference data for designing and developing electrically conductive amorphous materials with faster potassium-ion transport rates.
- 26 April 2024
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 53 (25) , 10434-10445
Deciphering the structure and potassium-ion transport mechanism of potassium borate glass
Potassium borate glass has great potential as an ion transport material. The ion transport rate is closely related to the microstructure of the glass. However, the disorder and variations in boron and oxygen atom types in the glass structure pose challenges in the analysis of this complex glass structure. In this work, the structure of potassium borate glass was unveiled through the neutron diffraction method and ab initio molecular dynamics (AIMD) simulations. The B–O, K–O, and O–O atomic interactions, bond lengths, coordination numbers, cavity distribution, ring structure distributions and other detailed information in the microstructure of potassium borate glass were obtained. By comparing the structure and properties of potassium borate glass with those of crystals of similar components, it is found that the bond lengths of 3B–BO (BO, bridging oxygen), 4B–BO and 3B–NBO (NBO, non-bridging oxygen) are longer than those of corresponding crystals, so the structure of the boron–oxygen network is looser and the density is smaller than that of similar crystals. Moreover, we found a rule that in both borate glass and crystal, the increase of NBO shortened the length of the B–O bond, and the increase of 4B increased the length of the B–O bond. The key structures affecting the transport rate of K+ were NBO, chain structure units and cavities. This work will provide reference data for designing and developing electrically conductive amorphous materials with faster potassium-ion transport rates.
- Open Access
Effect of Sr on Microstructure and Strengthening Mechanism of Al-4.6Mg Alloy
The as-cast Al-4.6Mg alloy was subjected to deformation and sensitization–desensitization heat treatment, and then the microstructure and the enhancement mechanism of Sr were investigated by optical microscopy, scanning electron microscopy–energy-dispersive spectroscopy, electron backscatter diffraction, and transmission electron microscopy. The precipitation phases of Al-4.6Mg alloy were mainly β-Al3Mg2, Al6Mn, and Al6(Mn Cr), and the nanoscale precipitation phases were Al3Mn and Al11Mn4. The formation of β-Al3Mg2 was hindered by the addition of 0.1 wt.% Sr. In addition, the precipitate phase Al4Sr and the nano-sized precipitate phase τ-Al38Mg58Sr4 were uniformly distributed in the spherical matrix. The addition of Sr promoted the redissolution of Mg atoms in Al-4.6Mg alloy, increasing the solubility of Mg in the α-Al matrix from 4.7 wt.% to 5.1 wt.%. The microstructure analysis showed that Sr addition inhibited the recovery and recrystallization of the alloy because the Sr element elevated the recrystallization temperature. As a result, the grain deformation was intensified, the grain size was decreased from 6.96 μm to 5.39 μm, the low-angle grain boundaries were increased from 78.7 at % to 84.6 at %, and the high-angle grain boundaries were increased from 21.3 at % to 15.4 at %. Furthermore, the mechanical properties of the alloy were significantly improved, and the plasticity degraded after the addition of the Sr element. The yield strength of the alloy was enhanced mainly through fine grain strengthening, dispersion strengthening, solid solution strengthening, and working hardening. The strengthening mechanisms were analyzed in detail.
Open AccessEffect of Sr on Microstructure and Strengthening Mechanism of Al-4.6Mg Alloy
The as-cast Al-4.6Mg alloy was subjected to deformation and sensitization–desensitization heat treatment, and then the microstructure and the enhancement mechanism of Sr were investigated by optical microscopy, scanning electron microscopy–energy-dispersive spectroscopy, electron backscatter diffraction, and transmission electron microscopy. The precipitation phases of Al-4.6Mg alloy were mainly β-Al3Mg2, Al6Mn, and Al6(Mn Cr), and the nanoscale precipitation phases were Al3Mn and Al11Mn4. The formation of β-Al3Mg2 was hindered by the addition of 0.1 wt.% Sr. In addition, the precipitate phase Al4Sr and the nano-sized precipitate phase τ-Al38Mg58Sr4 were uniformly distributed in the spherical matrix. The addition of Sr promoted the redissolution of Mg atoms in Al-4.6Mg alloy, increasing the solubility of Mg in the α-Al matrix from 4.7 wt.% to 5.1 wt.%. The microstructure analysis showed that Sr addition inhibited the recovery and recrystallization of the alloy because the Sr element elevated the recrystallization temperature. As a result, the grain deformation was intensified, the grain size was decreased from 6.96 μm to 5.39 μm, the low-angle grain boundaries were increased from 78.7 at % to 84.6 at %, and the high-angle grain boundaries were increased from 21.3 at % to 15.4 at %. Furthermore, the mechanical properties of the alloy were significantly improved, and the plasticity degraded after the addition of the Sr element. The yield strength of the alloy was enhanced mainly through fine grain strengthening, dispersion strengthening, solid solution strengthening, and working hardening. The strengthening mechanisms were analyzed in detail.
- Open Access
- 25 April 2023
- Published by Elsevier in Desalination and Water Treatment
- Vol. 286, 274-281
Experimental study of isothermal evaporation of Lhaguo Tso Salt Lake in Tibet at 0°C
- 25 April 2023
- Published by Elsevier in Desalination and Water Treatment
- Vol. 286, 274-281
Open AccessExperimental study of isothermal evaporation of Lhaguo Tso Salt Lake in Tibet at 0°C
- Open Access
Isothermal Evaporations of the Brine from Tibet’s Laguocuo Salt Lake at 15 °C: Experiment and UNIQUAC Simulations
The original composition of Laguocuo Salt Lake was found in the mirabilite area of the 15 °C isothermal phase diagrams of the Li+, Na+, K+//Cl−, SO42−-H2O system. Four phases comprise the isothermal evaporation procedure. The first stage is the unsaturated stage except for carbonate. The second stage is made up of sodium chloride, mirabilite, and borax precipitate simultaneously, where the halogenation rate is 31.58%, and the water loss rate is 68.32%. The penultimate step is the lithium salt precipitation section, where primarily NaCl, Na2SO4·10H2O, and Li2SO4·3Na2SO4·12H2O are formed, where the water loss rate is 91.38%, the halogenation rate is 7.42%, and the salt precipitation rate is 1.20%. The final stage is the eutectoid stage of lithium and potassium salts, where primarily NaCl, Li2SO4·3Na2SO4·12H2O, and 3K2SO4·Na2SO4 precipitate simultaneously. The rates of water loss, halogenation, and salt precipitation are 93.60%, 5.73%, and 0.67%, respectively. NaCl, Li2SO4·3Na2SO4·12H2O, and 3K2SO4·Na2SO4 were all precipitated through dispersion precipitation of borax with the evaporation process following precipitation. The UNIQUAC model was employed to predict the isothermal evaporation at 15 °C. The theoretical calculation and the experimental were in good agreement. The present work can offer a fundamental theoretical framework for the development and use of Laguocuo Salt Lake resources at 15 °C.
Open AccessIsothermal Evaporations of the Brine from Tibet’s Laguocuo Salt Lake at 15 °C: Experiment and UNIQUAC Simulations
The original composition of Laguocuo Salt Lake was found in the mirabilite area of the 15 °C isothermal phase diagrams of the Li+, Na+, K+//Cl−, SO42−-H2O system. Four phases comprise the isothermal evaporation procedure. The first stage is the unsaturated stage except for carbonate. The second stage is made up of sodium chloride, mirabilite, and borax precipitate simultaneously, where the halogenation rate is 31.58%, and the water loss rate is 68.32%. The penultimate step is the lithium salt precipitation section, where primarily NaCl, Na2SO4·10H2O, and Li2SO4·3Na2SO4·12H2O are formed, where the water loss rate is 91.38%, the halogenation rate is 7.42%, and the salt precipitation rate is 1.20%. The final stage is the eutectoid stage of lithium and potassium salts, where primarily NaCl, Li2SO4·3Na2SO4·12H2O, and 3K2SO4·Na2SO4 precipitate simultaneously. The rates of water loss, halogenation, and salt precipitation are 93.60%, 5.73%, and 0.67%, respectively. NaCl, Li2SO4·3Na2SO4·12H2O, and 3K2SO4·Na2SO4 were all precipitated through dispersion precipitation of borax with the evaporation process following precipitation. The UNIQUAC model was employed to predict the isothermal evaporation at 15 °C. The theoretical calculation and the experimental were in good agreement. The present work can offer a fundamental theoretical framework for the development and use of Laguocuo Salt Lake resources at 15 °C.
- 13 January 2023
- Published by Elsevier in Science of The Total Environment
- Vol. 868, 161612
Origin, composition, and accumulation of dissolved organic matter in a hypersaline lake of the Qinghai-Tibet Plateau
- 13 January 2023
- Published by Elsevier in Science of The Total Environment
- Vol. 868, 161612
Origin, composition, and accumulation of dissolved organic matter in a hypersaline lake of the Qinghai-Tibet Plateau
- 12 January 2023
- Published by Elsevier in Electrochimica Acta
- Vol. 442, 141895
Ultrathin hierarchical porous Cu current collector fabricated by anodic oxidation in complexing agent system for stable anode-free Lithium metal batteries
- 12 January 2023
- Published by Elsevier in Electrochimica Acta
- Vol. 442, 141895
Ultrathin hierarchical porous Cu current collector fabricated by anodic oxidation in complexing agent system for stable anode-free Lithium metal batteries
- 9 September 2022
- Published by Springer Nature in Journal of Porous Materials
- Vol. 30 (1) , 267-276
Effect of dealloying temperature on microstructure and tensile properties of self-supporting nanoporous copper foil fabricated in situ
- 9 September 2022
- Published by Springer Nature in Journal of Porous Materials
- Vol. 30 (1) , 267-276
Effect of dealloying temperature on microstructure and tensile properties of self-supporting nanoporous copper foil fabricated in situ
- 10 August 2021
- Published by Springer Nature in Journal of Solution Chemistry
- Vol. 50 (8) , 1103-1112
Solid–Liquid Stable Equilibrium of the Quaternary System LiCl + NaCl + Li2SO4 + Na2SO4 + H2O at 288.15 K
- 10 August 2021
- Published by Springer Nature in Journal of Solution Chemistry
- Vol. 50 (8) , 1103-1112
Solid–Liquid Stable Equilibrium of the Quaternary System LiCl + NaCl + Li2SO4 + Na2SO4 + H2O at 288.15 K
- 1 April 2021
- Published by Elsevier in Chemosphere
- Vol. 268, 128804
Chemical characterization of non-volatile dissolved organic matter from oilfield-produced brines in the Nanyishan area of the western Qaidam Basin, China
- 1 April 2021
- Published by Elsevier in Chemosphere
- Vol. 268, 128804
Chemical characterization of non-volatile dissolved organic matter from oilfield-produced brines in the Nanyishan area of the western Qaidam Basin, China