Effect of latent heat during primary crystallization on the nanostructural formation process in nanocrystalline soft magnetic materials
Open Access
- 1 January 2020
- journal article
- conference paper
- Published by AIP Publishing in AIP Advances
- Vol. 10 (1) , 015105
Abstract
Nanocrystalline soft magnetic materials are known to be prepared by primary crystallization of Fe-based amorphous precursors. Since the crystallization reaction is exothermic, the amorphous precursor may experience a temporary rise in its temperature relative to its surroundings during the process of nanocrystallization. Given the typical latent heat of primary crystallization (∼ 100 kJ/kg), this temperature rise may exceed hundreds of degrees if not adequately controlled and thus, lead to the formation of unwanted magnetically hard compounds. This effect is generally small for isolated ribbons annealed with a moderate heating rate. However, the recent adoption of high heating rates and short annealing times has caused the self-heating effect to become relevant even for small sample sizes. In this work, the effect of self-heating on the microstructure and magnetic properties of nanocrystalline Fe86B14 is investigated. It is found that magnetically hard Fe-B compounds cannot be avoided when annealing under vacuum in an infrared furnace with a heating rate ≥3 K/s due to the self-heating effect. However, the high thermal conductivity of the copper blocks used by the ultra-rapid annealing process can successfully prevent a self-heating induced temperature rise during annealing, avoiding unwanted compound formation. Finite Element Analysis is also used for predicting the extent of self-heating during infrared annealing.Keywords
Funding Information
- Australian Research Council
This publication has 26 references indexed in Scilit:
- New Excellent Soft Magnetic FeSiBPCu Nanocrystallized Alloys With High $B_{s}$ of 1.9 T From Nanohetero-Amorphous PhaseIEEE Transactions on Magnetics, 2009
- New High-Bs Fe-Based Nanocrystalline Soft Magnetic AlloysJapanese Journal of Applied Physics, 2007
- Rapid thermal processing of magnetic materialsJournal of Physics D: Applied Physics, 2006
- Structure and magnetic properties of (Fe0.5Co0.5)88Zr7B4Cu1 nanocrystalline alloysJournal of Applied Physics, 1998
- Soft magnetic properties of nanocrystalline bcc Fe-Zr-B and Fe-M-B-Cu (M=transition metal) alloys with high saturation magnetization (invited)Journal of Applied Physics, 1991
- Compositional Dependence of Physical Properties and Reversible Structural Relaxation Behavior in Fe–B–Si Amorphous AlloysMaterials Transactions, JIM, 1990
- High Saturation Magnetization and Soft Magnetic Properties of bcc Fe–Zr–B Alloys with Ultrafine Grain StructureMaterials Transactions, JIM, 1990
- New Fe-based soft magnetic alloys composed of ultrafine grain structureJournal of Applied Physics, 1988
- Phase Diagram of Amorphous and Crystallized Fe-B Alloy SystemJapanese Journal of Applied Physics, 1981
- Iron-boron metallic glassesJournal of Applied Physics, 1978