Synthesis of zinc from spent zinc-manganese-carbon batteries and its application as sacrificial anodes in cathodic protection
- 26 December 2023
- journal article
- research article
- Published by Egyptian Knowledge Bank in Egyptian Journal of Chemistry
- Vol. 67 (7) , 319-329
Abstract
The present study investigated the leaching of zinc from spent zinc manganese batteries in sulfuric acid solution and the synthesis of zinc anodes from the pregnant solution used for cathodic protection. The influences of acid concentration, liquid/solid ratio, stirring speed, and temperature on the dissolution rate were investigated. The leaching process of zinc from the batteries using sulfuric acid solutions achieved a high dissolution rate of approximately 97.3% within 60 minutes under specific conditions. The kinetic data for the leaching rate was analyzed and found to follow the chemical reaction-controlled process. Moreover, the electrochemical performance of the synthesized Zn anode obtained from the pregnant solution using electrodeposition and casting techniques was investigated. The results showed that the synthesized zinc anodes exhibited similar electrochemical performance to standard zinc anodes, with a current capacity of 736.23 A.h/Kg and an anodic efficiency of 89.79%. Further, the outcomes illustrated that the electrochemical performance of the synthesized Zn anode in artificial seawater is similar to the standard Zn anode and obeyed the NACE Standard RP0169 potential criteria for cathodic protection.Keywords
This publication has 33 references indexed in Scilit:
- Development of metal oxide incorporated Al-Zn-Sn sacrificial anodes processed by stir casting and heat treatmentJournal of Solid State Electrochemistry, 2022
- Challenges and solutions of cathodic protection for marine shipsCorrosion Communications, 2021
- Hydrometallurgical recovery of spent cobalt-based lithium-ion battery cathodes using ethanol as the reducing agentEnvironmental Research, 2020
- Recovery Zinc and Manganese from Spent Battery Powder by Hydrometallurgical RouteEnergy Procedia, 2017
- Selective process of zinc extraction from spent Zn–MnO2 batteries by ammonium chloride leachingHydrometallurgy, 2015
- Selective Acidic Leaching of Spent Zinc-Carbon Batteries Followed by Zinc ElectrowinningMetallurgical and Materials Transactions B, 2014
- Influence of silicon on the corrosion behaviour of Al–Zn–In–Mg–Ti sacrificial anodeCorrosion Science, 2011
- Comparative leaching of spent zinc-manganese-carbon batteries using sulfur dioxide in ammoniacal and sulfuric acid solutionsHydrometallurgy, 2010
- Reductive leaching of manganese and zinc from spent alkaline and zinc–carbon batteries in acidic mediaHydrometallurgy, 2009
- Separation of zinc from spent zinc-carbon batteries by selective leaching with sodium hydroxideHydrometallurgy, 2009