SFSaad. M. Fayed

Saad. M. Fayed

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Saad. M. Fayed has a total of 14 co-authors. Here are the top co-authors by number of shared publications:

  • Dongxu Chen

    School of Material and Metallurgy, University of Science and Technology Liaoning, Anshan, China

    2 shared publications
  • Hani E. Sharafedin

    Department of Mining and Petroleum Engineering, Faculty of Engineering, Al-Azhar University, Nasr City, Cairo, Egypt

    2 shared publications
  • M. M. Sadawy

    Department of Mining and Petroleum Engineering, Faculty of Engineering, Al-Azhar University, Nasr City, Cairo, Egypt

    2 shared publications
  • Mosaad Sadawy

    Al-Azhar University, Faculty of Engineering, Mining and Pet. Dept., Nasr City, 11371, Cairo, Egypt

    2 shared publications
  • Shengli Li

    School of Materials and Metallurgy, University of Science and Technology Liaoning, Anshan, China

    2 shared publications
  • A. I. Salem

    Department of Civil Engineering, Faculty of Engineering, Al-Azhar University, Nasr City, Cairo, Egypt

    1 shared publication

Latest Publications

  • Open Access

    Hydrated Nano-Blast Furnace Slag: A Green and Efficient Adsorbent for Industrial Wastewater Treatment

    by M. M. Sadawy, Saad. M. Fayed, Hani E. Sharafedin, A. I. Salem, Ahmed Hosny, Shengli Li

    This study investigated the efficiency of hydrated nanoscale blast furnace slag (NBFS) as a cost-effective and sustainable adsorbent for removing iron, copper, and zinc ions from wastewater. The NBFS was modified through a dual process involving nanoscale transformation and hydration with water (20 wt.%) for 7 days, enhancing its surface area and reactivity. The hydrated NBFS was characterized using XRF, SEM, EDS, FTIR, and XRD techniques, revealing its amorphous to crystalline transformation and the presence of OH− as a functional group. Batch adsorption experiments were conducted to optimize the parameters of adsorbent dosage, pH, contact time, initial ion concentration, and temperature. The results demonstrated remarkable removal efficiencies of 99.4% for Fe, 96.2% for Cu, and 93.7% for Zn at an optimal pH of 6, a contact time of 90 min, and a temperature of 70 °C. The adsorption process followed pseudo-second-order kinetics and the Langmuir isotherm model, indicating a chemisorption mechanism with monolayer coverage. Thermodynamic studies confirmed that the adsorption process was spontaneous. Additionally, the hydrated NBFS exhibited excellent reusability, maintaining a high removal efficiency over five consecutive adsorption-desorption cycles.


  • Open Access

    Improving the Corrosion Resistance of CuAlFeNi Shape Memory Alloy for Marine Applications

    by M. M. Sadawy, Saad. M. Fayed, Ahmed. M. Hosny

    CuAlFeNi shape memory alloys (SMAs) were fabricated utilizing the stir-casting method. After that, the fabricated alloys were heat-treated at different temperatures. Microstructural analyses of the samples were performed using scanning electron microscopy attached with energy-dispersive X-ray spectroscopy, optical microscopy, and X-ray diffraction (XRD). The Brinell hardness was also assessed. The samples were then exposed to various electrochemical techniques in simulated seawater to determine their corrosion behavior and electrochemical characteristics. The findings demonstrated that the microstructure of the SMAs after annealing at 960°C and subsequent ice-water quenching was a martensitic phase. The results showed that, as the tempering temperature increased from 960/350°C to 960/650°C, the corrosion potential rose from − 0.68 to − 0.24 VAg/AgCl, while the corrosion current density decreased from 32.0 µA cm−2 to 4.0 µA cm−2. At the same time, the passive current density also decreased from (8.33 to 6.21) × 10−4 A cm−2. Electrochemical impedance tests showed that the treated sample at 960/650°C increased the charge transfer resistance while decreasing capacitance values in the double layers. These findings demonstrated that tempered SMAs had higher corrosion resistance than the as-cast alloy. The corroded morphologies revealed that, as the tempering temperatures rose, the corrosion degradation on the surface became smoother and more uniform, whereas the as-cast suffered from selective corrosion. Further, the XRD diffraction showed that the patina film is composed of Al2O3, CuO, and Cu2O phases.


  • Pulse width effects on microstructure and electrochemical properties of DLC coatings deposited on high-strength Al alloy

    by Saad M Fayed, Dongxu Chen, Shengli Li, M M Sadawy

    This study employed cage-like hollow discharge plasma-enhanced chemical vapor deposition (PECVD) to synthesize diamond-like carbon (DLC) films on the 2024 aluminum alloy. The DLC coatings were deposited using varying pulse widths. The microstructural and mechanical properties of the films were evaluated using scanning electron microscopy (SEM), x-ray diffraction (XRD), atomic force microscopy (AFM), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), Nano Indenter G200 device, and a tribometer model (MS-T3001). The anticorrosion behavior of the coatings in a 3.5 wt% NaCl solution was investigated using a range of electrochemical techniques. The results showed that increasing the pulse width to 20 μs led to the deposition of thicker films due to enhanced plasma density and deposition rate. Corrosion measurements revealed lower corrosion and passive current densities as pulse width increased. This behavior can be attributed to the thicker DLC film, which effectively reduces the presence of pores and inhibits corrosive species from attacking the bare alloy. Additionally, this study calculated and reported the thermodynamic corrosion parameters, including enthalpy of activation (∆H), entropy of activation, and activation energy (∆E) for the sample.


  • Synthesis of zinc from spent zinc-manganese-carbon batteries and its application as sacrificial anodes in cathodic protection

    by M.M. Sadawy, Saad M. Fayed, Hani E. Sharafedin

    The present study investigated the leaching of zinc from spent zinc manganese batteries in sulfuric acid solution and the synthesis of zinc anodes from the pregnant solution used for cathodic protection. The influences of acid concentration, liquid/solid ratio, stirring speed, and temperature on the dissolution rate were investigated. The leaching process of zinc from the batteries using sulfuric acid solutions achieved a high dissolution rate of approximately 97.3% within 60 minutes under specific conditions. The kinetic data for the leaching rate was analyzed and found to follow the chemical reaction-controlled process. Moreover, the electrochemical performance of the synthesized Zn anode obtained from the pregnant solution using electrodeposition and casting techniques was investigated. The results showed that the synthesized zinc anodes exhibited similar electrochemical performance to standard zinc anodes, with a current capacity of 736.23 A.h/Kg and an anodic efficiency of 89.79%. Further, the outcomes illustrated that the electrochemical performance of the synthesized Zn anode in artificial seawater is similar to the standard Zn anode and obeyed the NACE Standard RP0169 potential criteria for cathodic protection.


  • Open Access

    Microstructure, Corrosion and Electrochemical Properties of Cu/SiC Composites in 3.5 wt% NaCl Solution

    by M. M. Sadawy, Saad. M. Fayed, Mahmoud Tayea, I. G. El-Batanony

    This study investigated the role of SiC as a reinforcement on microstructure, corrosion, and electrochemical properties of Cu/xSiC (x = 0, 5, 10, 15, 20, 25, and 30 vol% SiC) composites. The powder metallurgy route was used to fabricate Cu/SiC composite. The distribution of SiC reinforcing particles in the Cu matrix and their interfaces were investigated using optical and SEM/EDS microscopes. The various phases of Cu strengthened with SiC particles were detected using an X-ray diffractometer. The anticorrosion behavior and electrochemical properties of composites were investigated using various electrochemical techniques in 3.5 wt% NaCl solution. The electrochemical studies showed that the inclusion of SiC particles in the Cu matrix improved the resistance to corrosion. It was found that as the reinforcing particles increased to 20 vol%, the corrosion potential increased from − 240 to − 183 mVAg/AgCl, and the corrosion current density decreased from 5.01 to 0.02 µA cm−2, while the passive current density decreased from 17.58 to 4.74 × 10–4 A cm−2. This behavior resulted from the nucleation and production of a good protective layer. On another side, increasing reinforcing particles over 20 vol%, the corrosion current density increased from 0.05 to 0.63 µA cm−2, while the corrosion potential shifted from − 196 to − 206 mVAg/AgCl. Graphical Abstract