The influence of temperature on tribological behaviour of Ni-SiC Electrodeposited coating
Authors:
- 8 April 2016
- journal article
- research article
- Published by Taylor & Francis in Materials at High Temperatures
- Vol. 33 (3) , 219-224
Abstract
In this article, the Electrodeposition of a Ni-SiC composite coating, which is mostly used as wear resistant coating in many applications, such as engine cylinders, combustion engines and casting moulds, was carried out from a sulphamate bath. Both mechanical and ultrasonic stirrers were used simultaneously during the process. Due to the working temperature of coating in the mentioned applications, the wear tests were carried out from 25 to 300 °C by pin-on-disk method and the high temperature tribological behaviour of the coating was investigated. Based on the results obtained from the wear tests, the Ni-SiC coating has low friction coefficient (0.36–0.42) and wear weight loss (0.7–2 mg) values at 25 and 100 °C. But, by increasing the temperature to 200–300 °C, which is near to the working temperature of many applications, the friction coefficient and wear weight loss values significantly increased.Keywords
This publication has 19 references indexed in Scilit:
- Phase composition, microstructure and microhardness of electroless nickel composite coating co-deposited with SiC on cast aluminium LM24 alloy substrateSurface and Coatings Technology, 2013
- Effects of plating parameters on the Ni–P–Al2O3 composite coatings prepared by pulse and direct current platingSurface and Coatings Technology, 2013
- Rain erosion characteristics of electrodeposited Ni–SiC metal-matrix composite layersWear, 2011
- A study on the electrocodeposition processes and properties of Ni–SiC nanocomposite coatingsJournal of Coatings Technology and Research, 2010
- Pulse electrodeposition of Ni–P matrix composite coatings reinforced by SiC particlesJournal of Alloys and Compounds, 2010
- Nano SiC-Nickel Composite Coatings from a Sulfamat Bath Using Direct Current and Pulsed Direct CurrentJournal of Materials Engineering and Performance, 2010
- Electrodeposition of Ni–SiC nano-composite coatings and evaluation of wear and corrosion resistance and electroplating characteristicsColloids and Surfaces A: Physicochemical and Engineering Aspects, 2008
- Enhancement of wear resistance of ductile cast iron by Ni–SiC composite coatingWear, 2006
- Mechanical properties and wear and corrosion resistance of electrodeposited Ni–Co/SiC nanocomposite coatingApplied Surface Science, 2006
- Hardening effect induced by incorporation of SiC particles in nickel electrodepositsJournal of Applied Electrochemistry, 2005