Structural collapse correlative analysis using phenomenological fiber hinge elements to simulate two‐directional column deteriorations
Authors:
- 29 April 2016
- journal article
- research article
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 45 (10) , 1581-1601
Abstract
Summary: This paper presents three‐dimensional nonlinear dynamic analyses of a full‐scale four‐story steel building tested to collapse in 2007 at the E‐Defense shake‐table facility in Japan, using strong ground motion. Local buckling and consequent strength deterioration of all six columns at the first‐story level were observed as the main reason for the building collapse. Fiber hinge element that consists of fibers discretizing the column cross section is used model each end of the column. It has zero length but considers finite yield‐zone length for the fiber to simulate elastoplastic behavior and local buckling. Other parts of the building are modeled by standard column, beam, truss, and spring elements. Despite the unavoidable limitation of the parameters defining the fiber hinge element's properties that are empirically determined from the behavior of the cantilever column tested using an identical steel member, the analysis using the element appears to simulate well the column behavior because of the axial load and biaxial bending moment whose relative magnitudes differ considerably because of the locations. The analysis results indicate different deterioration patterns of the columns and effects of complex loading such as compression and tensile axial load applied alternately, additional high frequency axial load caused by vertical accelerations, and shifting of the principal directions of the bending moments cycle by cycle. Responses such as story drift, accelerations, base shear, and energy dissipation are also simulated well, and progress of local deterioration in the first‐story columns and global soft‐story mechanism is clarified by the analysis. Copyright © 2016 John Wiley & Sons, Ltd.Keywords
This publication has 18 references indexed in Scilit:
- Verification and validation of a seismic response analysis code for framed structures using the ASI‐Gauss techniqueEarthquake Engineering & Structural Dynamics, 2013
- CYCLIC LOADING TEST ON RHS COLUMNS UNDER BI-DIRECTIONAL HORIZONTAL FORCESJournal of Structural and Construction Engineering (Transactions of AIJ), 2013
- Analytical studies of a full-scale steel building shaken to collapseEngineering Structures, 2010
- COLLAPSE BEHAVIOR ON SHAKING TABLE TESTJournal of Structural and Construction Engineering (Transactions of AIJ), 2010
- EVALUATION OF SEISMIC PERFORMANCE OF EXTERIOR CLADDING IN FULL-SCALE 4-STORY BUILDING SHAKING TABLE TESTJournal of Structural and Construction Engineering (Transactions of AIJ), 2009
- EXPERIMENTAL PROCEDURE AND ELASTIC RESPONSE CHARACTERISTICS OF SHAKING TABLE TESTJournal of Structural and Construction Engineering (Transactions of AIJ), 2009
- ELASTO-PLASTIC RESPONSES AND PROCESS LEADING TO A COLLAPSE MECHANISMJournal of Structural and Construction Engineering (Transactions of AIJ), 2009
- Nonlinear analysis of concrete-filled thin-walled steel box columns with local buckling effectsJournal of Constructional Steel Research, 2006
- Seismic behavior and modeling of high-strength composite concrete-filled steel tube (CFT) beam–columnsJournal of Constructional Steel Research, 2002
- Local and post-local buckling of concrete filled steel welded box columnsJournal of Constructional Steel Research, 1998