KKKazuhiko Kasai

Kazuhiko Kasai

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Kazuhiko Kasai has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Structural collapse correlative analysis using phenomenological fiber hinge elements to simulate two‐directional column deteriorations

    by Kazuhiko Kasai, Tran‐Tuan Nam, Bruce F. Maison

    Summary: This paper presents three‐dimensional nonlinear dynamic analyses of a full‐scale four‐story steel building tested to collapse in 2007 at the E‐Defense shake‐table facility in Japan, using strong ground motion. Local buckling and consequent strength deterioration of all six columns at the first‐story level were observed as the main reason for the building collapse. Fiber hinge element that consists of fibers discretizing the column cross section is used model each end of the column. It has zero length but considers finite yield‐zone length for the fiber to simulate elastoplastic behavior and local buckling. Other parts of the building are modeled by standard column, beam, truss, and spring elements. Despite the unavoidable limitation of the parameters defining the fiber hinge element's properties that are empirically determined from the behavior of the cantilever column tested using an identical steel member, the analysis using the element appears to simulate well the column behavior because of the axial load and biaxial bending moment whose relative magnitudes differ considerably because of the locations. The analysis results indicate different deterioration patterns of the columns and effects of complex loading such as compression and tensile axial load applied alternately, additional high frequency axial load caused by vertical accelerations, and shifting of the principal directions of the bending moments cycle by cycle. Responses such as story drift, accelerations, base shear, and energy dissipation are also simulated well, and progress of local deterioration in the first‐story columns and global soft‐story mechanism is clarified by the analysis. Copyright © 2016 John Wiley & Sons, Ltd.


  • Seismic Retrofit Using Rocking Walls and Steel Dampers

    by A. Wada, Z. Qu, H. Ito, S. Motoyui, H. Sakata, K. Kasai

    A retrofit system of prestressed concrete rocking walls and steel dampers is used to control the seismic damage mode and increase the strength and energy dissipating capacity of an 11 story steel reinforced concrete frame in Japan. Important details of the retrofit design are introduced. The seismic performance of the structure before and after the retrofit is evaluated through extensive nonlinear time history analysis. Results show that the rocking system can significantly reduce both the seismic responses to different earthquake ground motions and their scattering. This makes the damage mode and the seismic performance of the retrofitted building more predictable, leading to a possibility of more reliable performance-based seismic design.


  • Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Part 3 — Experiments on Dampers and Frame Subassemblies

    by Kazuhiko Kasai, Yoji Ooki, Shojiro Motoyui, Toru Takeuchi, Koichi Kajiwara, Eiji Sato

    Wide-ranging participation from the US and Japan is being encouraged in the NEES/E-Defense Collaboration Research Program utilizing the E-Defense shaking table facility. The facility, whose construction was completed in early 2005, is the largest earthquake simulator capable of subjecting full-scale structures to the strongest earthquakes recorded in the worlds. Relatively short term collaboration has already taken place involving geo-structures, wooden buildings, and reinforced concrete buildings. Currently, more emphasis is made on longer term collaboration out to 2010, involving steel buildings and bridges. The steel building project focuses on moment-resisting frames, innovative methods for new or existing buildings, nonstructural elements, and protective systems. Accordingly, the Japan team has four working groups (WG's). This paper discusses the work of Damper and Isolation Systems WG focusing on protective systems, such as passive control systems and base isolation systems for the steel buildings. Three companion papers by Suita et al. Ohsaki et al., and Takeuchi et al. discuss the studies by the other WG's.


  • Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Part 1 — Collapse Experiments on 4-Story Moment Frames

    by Keiichiro Suita, Satoshi Yamada, Motohide Tada, Kazuhiko Kasai, Yuichi Matsuoka, Eiji Sato

    Wide-ranging participation from the US and Japan is being encouraged in the NEES/E-Defense Collaboration Research Program utilizing the E-Defense shaking table facility. A major research project on steel buildings utilizing the E-Defense three-dimensional shake table facility is underway in Japan. It involves several studies on moment frames, innovative methods for new or existing buildings, protective systems, and nonstructural elements. As one of the studies, a challenging seismic experiment to simulate collapse of a full-scale bulding comprising the moment frame was conducted in September 2007. The term collapse here is defined as the state where the structure loses its ability to sustain gravity loads. This paper presents preliminary reports on the collapse simulation experiments.


  • Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Part 4 — Experiments Utilizing of Multipurpose Test Bed

    by Toru Takeuchi, Kazuhiko Kasai, Mitsumasa Midorikawa, Yuichi Matsuoka, Takeshi Asakawa, Iaso Kubodera, Yuji Kurokawa, Hirotaka Ando, Shoichi Kishiki

    The E-Defense shake table facility, the world's largest earthquake simulator, is being utilized for a major research project on steel buildings in Japan. E-Defense can shake a large specimen with a complete three-dimensional configuration. However, since the cost of such a specimen can be very high, testing a part of the specimen such as the plane frame of a building would be much more economical and can still produce meaningful data. Such test methods would also enable parametric studies requiring multiple specimens. Accordingly, the authors are currently constructing a so-called "test bed" having a multipurpose inertial mass system. The test bed will be utilized for the study on innovative steel structures, involving researchers from both US and Japan, as a part of the NEES/E-Defense Collaboration Research Program.


  • Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Part 2 — Collapse Simulation and Blind Analysis Contest

    by Makoto Ohsaki, Kazuhiko Kasai, Yuich Matsuoka, Jingyao Zhang

    The E-Defense shake table facility, which is world's largest earthquake simulator, is being utilized for a major research project on steel buildings in Japan. The project involves several studies on moment frames, innovative methods for new or existing buildings, protective systems, and nonstructural elements [1]. As one of such studies, a challenging full-scale experiment to simulate collapse of a four-story moment frame was carried out in September 2007 [2]. In order to investigate the issues such as modeling techniques, estimation of damping and stiffness of nonstructural components, extensive analytical studies are being conducted by the members of the committee in charge of the test. Among several types of analysis described in Ref. [3], the post-test analysis results by the finite element model is reported in the first part of this study. A blind analysis contest has been conducted in conjunction with the test to stimulate development of computational methods and efficient modeling techniques for collapse analysis of steel frame buildings. The outline of the contest and the types of the analysis methods used by the participants in the contest are reported in the second part of this study.


  • E-Defense Tests on Full-Scale Steel Buildings: Part 4 - Multipurpose Test Bed for Efficient Experiments

    by Toru Takeuchi, Kazuhiko Kasai, Mitsumasa Midorikawa, Yuichi Matsuoka

    The E-Defense shake table facility, the world's largest earthquake simulator, is being utilized for a major research project on steel buildings in Japan. The project involves several studies on moment frames, innovative methods for new or existing buildings, protective systems, and nonstructural elements. E-Defense can shake a large specimen with a complete three-dimensional configuration. However, since the cost of such a specimen can be very high, testing a part of the specimen such as the plane frame of a building would be much more economical and can still produce meaningful data. Such test methods would also enable parametric studies requiring multiple specimens. Accordingly, the writers are currently constructing a so-called "test bed" having a multipurpose inertial mass system. The test bed will be utilized for the aforementioned study on innovative methods, involving researchers from both US and Japan, as a part of the NEES/E-Defense Collaboration Research Program. The test bed needs to accommodate various specimens, and have the following components: 1) Inertial mass connected to the specimen at each story level, with its self-weight supported, thereby inducing a horizontal inertial force into the specimens. 2) Inter-story stiffness element at each story level, having the capability of setting the stiffness to zero or other values, thereby adding desired horizontal stiffness to the specimen.

  • E-Defense Tests on Full-Scale Steel Buildings: Part 3 - Analytical Simulation of Collapse

    by Motohide Tada, Makoto Ohsaki, Satoshi Yamada, Shojiro Motoyui, Kazuhiko Kasai

    The world's largest earthquake simulator, the E-Defense shake table facility is being utilized for a major research project on steel buildings in Japan. The project involves several studies on moment frames, innovative methods for new or existing buildings, protective systems, and nonstructural elements. As one of such studies, a challenging full-scale experiment to simulate collapse of a 4-story building comprising moment frames is scheduled for September 2007. Regarding this experiment, extensive analytical studies have been conducted by the writers, in order to investigate important key issues such as: possible scenario of collapse and corresponding design of specimen, selection of ground motions for shaking, member modeling techniques for accurate simulation of structure responses, and so on. The results from the analyses will be discussed in this paper. The analytical methods used will be explained next.


  • E-Defense Tests on Full-Scale Steel Buildings: Part 1 - Experiments Using Dampers and Isolators

    by Kazuhiko Kasai, Yoji Ooki, Shojiro Motoyui, Toru Takeuchi, Eiji Sato

    Wide-ranging participation from the US and Japan is being encouraged in the NEES/E-Defense Collaboration Research Program utilizing the E-Defense shaking table facility. The facility, whose construction was completed in early 2005, is the largest earthquake simulator capable of subjecting full-scale structures to the strongest earthquakes recorded in the world. Relatively short term collaboration has already taken place involving geo-structures, wooden buildings, and reinforced concrete buildings. Currently, more emphasis is made on longer term collaboration out to 2010, involving steel buildings and bridges. Figure 1 shows overall organizations for the steel building project led by the Japan team. The steel building project focuses on moment-resisting frames, innovative methods for new or existing buildings, nonstructural elements, and protective systems. Accordingly, the Japan team has four working groups (WG's) shown in Figure 1. This paper discusses the work of Damper and Isolation Systems WG focusing on protective systems, such as passive control systems and base isolation systems for the steel buildings. Three companion papers by Suita et al., Tada et al., and Takeuchi et al. discuss the studies by the other WG's.