Sago Starch Reinforced With Cellulose Microfibers Isolated From Dialium cochinchinense Residue
- 31 March 2026
- journal article
- research article
- Published by Wiley in Starch - Stärke
- Vol. 78 (4) , e70196
Abstract
This research investigated the development of sago starch (SS) film reinforced with velvet tamarind ( Dialium cochinchinense ) peels for potential biopolymer film applications. SS was gelled at 80°C and plasticized with glycerol. After that, VT and treated VT (TVT) fibers were incorporated with content of 1, 3, and 5 wt%. The SS, SS_VT, and SS_TVT biocomposites were systematically evaluated for their transparency, water resistance and tensile properties. The addition of VT and TVT significantly improved ultraviolet (UV) protection, although this improvement was accompanied by a decrease in visible light transparency. Water absorption and water vapor transmission of the biocomposite films also decreased compared to neat SS. Moreover, the biocomposite films exhibited substantially higher tensile strength (TS) and Young's modulus (YM) than neat SS film. Notably, the composite film containing 3 wt% VT demonstrated the highest TS and YM value. This confirmed the effective dispersion of 3 wt% of VT within starch matrix and strong interface interaction between cellulose fibers and starch, as revealed by FTIR and SEM analysis. The thermal degradation temperatures of biocomposite films containing 1 wt% VT and TVT were shifted to higher values compared to that of the starch matrix. The incorporation of VT and TVT enhanced the tensile properties of the biocomposite films; however, TVT‐reinforced films showed relatively inferior performance compared to VT reinforced films, primarily due to increased particle agglomeration, as observed by SEM. Totally, SS films reinforced with VT show strong potential for biopolymer packaging applications, owing to their improved water resistance and mechanical properties.Keywords
This publication has 40 references indexed in Scilit:
- Characterization of starch biofilm reinforced with cellulose microfibers isolated from Musa Saba' midrib residue and its application as an active packaging filmJournal of Applied Polymer Science, 2023
- Progress and challenges in sustainability, compatibility, and production of eco‐composites: A state‐of‐art reviewJournal of Applied Polymer Science, 2021
- Effect of carboxymethyl cellulose concentration on mechanical and water vapor barrier properties of corn starch filmsCarbohydrate Polymers, 2020
- Preparation and characterization of starch‐based composite films reinforced by apricot and walnut shellsJournal of Applied Polymer Science, 2019
- How the surface wettability and modulus of elasticity of the Amazonian paricá nanofibrils films are affected by the chemical changes of the natural fibersEuropean Journal of Wood and Wood Products, 2018
- Morphological, barrier, and mechanical properties of cassava starch films reinforced with cellulose and starch nanoparticlesJournal of Applied Polymer Science, 2018
- Comparison of mechanical reinforcement effects of cellulose nanocrystal, cellulose nanofiber, and microfibrillated cellulose in starch compositesPolymer Composites, 2017
- Production and characterization of microfibrillated cellulose‐reinforced thermoplastic starch compositesJournal of Applied Polymer Science, 2015
- Effect of lignin removal on mechanical, thermal, and morphological properties of polylactide/starch/rice husk blend used in food packagingJournal of Applied Polymer Science, 2014
- Starch‐based biocomposite films reinforced with cellulose nanocrystals from garlic stalksPolymer Composites, 2013