A digital image correlation analysis on the influence of crown material in implant-supported prostheses on bone strain distribution
- 1 January 2012
- journal article
- research article
- Published by Japan Prosthodontic Society in Journal of Prosthodontic Research
- Vol. 56 (1) , 25-31
Abstract
A digital image correlation (DIC) method for full-field surface strain measurement was used to analyze the effect of two veneering materials for implant supported crowns on the strain distribution within the surrounding bone. An epoxy resin model of a bone block was made by housing acrylic resin replicas of a mandibular first premolar and second molar together with threaded implants replacing the second premolar and first molar. Porcelain-veneered (G1 and G3) and resin-veneered (G2 and G4) screw-retained splinted crowns were fabricated and loaded with (G1 and G2) and without (G3 and G4) the presence of the second molar replica. A 2-dimensional DIC measuring system was used to record surface deformation of the bone block model at a frequency of 1.0 Hz during application of a 250-N load. Maximum compressive strains (ɛ(XX), %) were found for the following regions: between molars, G1 (-0.21), G2 (-0.18), G3 (-0.26), and G4 (-0.25); between implants, G1 (-0.19), G2 (-0.13), G3 (-0.19), and G4 (-0.14). The magnitude of strains in the simulated bone block with the resin-veneered crowns was lower than that with porcelain-veneered crowns, irrespective of the presence or absence of the second molar. The softer resin veneer helped to spread the load more evenly amongst the supporting teeth and implants, thus reducing the strains in the simulant bone block. Conversely, using the harder porcelain veneer resulted in the load being concentrated within one or two teeth or implants, thus leading to higher strain values in the bone block.Keywords
Funding Information
- 2007/06995-3
- Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
- 2450/09-7
- Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
This publication has 21 references indexed in Scilit:
- Influence of maxillary cortical bone thickness, implant design and implant diameter on stress around implants: A three-dimensional finite element analysisJournal of Prosthodontic Research, 2010
- Micromotion and Stress Distribution of Immediate Loaded Implants: A Finite Element AnalysisClinical Implant Dentistry and Related Research, 2009
- Nonlinear finite element analyses: Advances and challenges in dental applicationsJournal of Dentistry, 2008
- Periodontal Ligament Hydrostatic Pressure with Areas of Root Resorption after Application of a Continuous Torque MomentThe Angle Orthodontist, 2007
- Strain Situation after Fixation of Three-Unit Ceramic Veneered Implant SuperstructuresImplant Dentistry, 2005
- Measurement of microstructural strain in cortical boneEuropean Journal of Morphology, 2005
- The influence of functional forces on the biomechanics of implant-supported prostheses—a reviewJournal of Dentistry, 2002
- Shock absorbability of various restorative materials used on implantsJournal of Oral Rehabilitation, 1999
- Biophysical stress analysis of restored teeth: experimental strain measurementDental Materials, 1988
- Three-dimensional Stress Distribution Around a Dental Implant at Different Stages of Interface DevelopmentJournal of Dental Research, 1983