Drastically Improving Aluminum-Air Battery Power Output via Aluminum Film Tuning
Open Access
- 1 March 2026
- journal article
- Published by The Electrochemical Society in ECS Advances
- Vol. 5 (1) , 010504
Abstract
Major improvements in the performance of aluminum-air batteries, based on improvement of the aluminum electrode polarization and limiting side reactions, are demonstrated. At high rates of discharge, cell performance is largely dictated by ohmic losses at the anode associated with the aluminum product layer. Turnover of this secondary passivation layer entails conversion of insoluble aluminum hydroxide to soluble aluminate ions. In cells employing the same air electrode and a polymer-based electrolyte, aluminum electrode behavior is systematically investigated as a function of hydroxide concentration, temperature, and electrolyte flow rate to identify optimum conditions and start-up protocols for battery discharge. Stannate addition and plating was explored as a path to inhibit Al corrosion and limit hydrogen evolution as a side reaction. The transient behavior of cells containing stannate in the electrolyte was studied to identify start-up conditions. Overall, this optimization enables a peak power density of 710 mW cm −2 in polarization experiments. Long-term constant current holds of the battery are also shown.Keywords
Funding Information
- Army Research Laboratory (W911NF2220007)
This publication has 40 references indexed in Scilit:
- Mass Transportation Facilitated Porous Fe/Co Dual‐Site Catalytic Cathodes for Ultrahigh‐Power‐Density Al–Air Fuel CellsAdvanced Energy Materials, 2024
- Corrosion Modeling of Aluminum Alloys: A Brief ReviewChemElectroChem, 2024
- Effect of Ultrasonic Waves on Anodic Behavior of Aluminum Anode in Alkaline Primary Aluminum-Air BatteryJournal of Materials Engineering and Performance, 2022
- Modification on water electrochemical environment for durable Al-Air Battery: Achieved by a Low-Cost sucrose additiveChemical Engineering Journal, 2022
- High energy efficiency of Al-based anodes for Al-air battery by simultaneous addition of Mn and SbChemical Engineering Journal, 2021
- Performance of an Al–0.08Sn–0.08Ga–xMg alloy as an anode for Al–air batteries in alkaline electrolytesJournal of Materials Science, 2020
- High energy efficiency and high power density aluminum‐air flow batteryInternational Journal of Energy Research, 2020
- Synergistic Inhibitory Effect of Potassium Sodium Tartrate Tetrahydrate and Sodium Stannate Trihydrate on Self‐Corrosion of Aluminum in Alkaline Aluminum‐Air BatteriesChemElectroChem, 2020
- Understanding the synergistic effect of alkyl polyglucoside and potassium stannate as advanced hybrid corrosion inhibitor for alkaline aluminum-air batteryChemical Engineering Journal, 2020
- Effect of Mg content on discharge behavior of Al-0.05Ga-0.05Sn-0.05Pb-xMg alloy anode for aluminum-air batteryJournal of Solid State Electrochemistry, 2018