Gabriel Goenaga
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Gabriel Goenaga has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
Thomas A. Zawodzinski
15 shared publicationsShane Foister
11 shared publicationsBrian Washington
University of Tennessee Knoxville
7 shared publications- Douglas S. Aaron
University of Tennessee, Knoxville
6 shared publications - Thomas A. Zawodzinski
University of Tennessee
6 shared publications - Colt Griffith
University of Tennessee, Knoxville
5 shared publications
Latest Publications
- 11 November 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 700
A compact flow-based aluminum-air battery for high-power operation
- 11 November 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 700
A compact flow-based aluminum-air battery for high-power operation
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (43) , 2202
Investigation of a Novel, Ultrahigh-Power-Density, Aluminum-Air Battery
Metal–air batteries offer substantially higher theoretical energy density than Li-ion batteries, rendering them suitable for stationary storage and advanced mobility applications, including eVTOL aircraft. Aluminum–air (Al–air) batteries are especially promising due to the natural abundance of Al and a theoretical energy density of approximately 8.1 kWh kg⁻¹, along with a specific capacity of about 2.9 Ah g⁻¹ [1]. This study presents a novel, membrane-less, mechanically rechargeable Al–air flow battery that integrates enhanced electrolyte and gas management using a flow-engineered architecture. The shallow electrolyte channel ensures even electrolyte (KOH) distribution and mitigates local corrosion, while the forced-convection cathode enhances oxygen transport to the catalyst layer. In 5 cm² prototypes operated at 70 °C, this configuration achieves an unprecedented 1.72 W cm⁻² at 0.75 V with pure oxygen and about 0.67 W cm⁻² at 1.12 V with air (shown in Figure 1), indicating ultrahigh-power output, exceeding known values demonstrated in the literature by at least a factor of three [2].
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (43) , 2202
Investigation of a Novel, Ultrahigh-Power-Density, Aluminum-Air Battery
Metal–air batteries offer substantially higher theoretical energy density than Li-ion batteries, rendering them suitable for stationary storage and advanced mobility applications, including eVTOL aircraft. Aluminum–air (Al–air) batteries are especially promising due to the natural abundance of Al and a theoretical energy density of approximately 8.1 kWh kg⁻¹, along with a specific capacity of about 2.9 Ah g⁻¹ [1]. This study presents a novel, membrane-less, mechanically rechargeable Al–air flow battery that integrates enhanced electrolyte and gas management using a flow-engineered architecture. The shallow electrolyte channel ensures even electrolyte (KOH) distribution and mitigates local corrosion, while the forced-convection cathode enhances oxygen transport to the catalyst layer. In 5 cm² prototypes operated at 70 °C, this configuration achieves an unprecedented 1.72 W cm⁻² at 0.75 V with pure oxygen and about 0.67 W cm⁻² at 1.12 V with air (shown in Figure 1), indicating ultrahigh-power output, exceeding known values demonstrated in the literature by at least a factor of three [2].
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (43) , 2206
Characterization of Versatile Electrolyte for Alkaline Electrochemical Systems
Alkaline metal-air batteries (AMABs) are of interest due to the potential for high energy density, which typically exceeds that of Li-ion batteries. In open systems such as metal-air batteries, however, performance must be assessed in terms of maximizing power or current density rather than the usual energy density metric. Cost and system performance are most strongly affected by these parameters because of their strong impact on cell count needed to achieve a given total power for an application. One of the key challenges of getting high-performance AMABs is to make a low-cost, durable membrane with high conductivity. This work describes the characterization of a KOH-loaded ion-conducting membrane with excellent conductivity and chemical stability for hydroxide ion conduction, which we refer to a ‘cross-linked, loaded alkaline membrane’ (CLAM). This CLAM membrane was developed in our lab from conserved polymer backbones modified with cationic moieties and cross-linking agents, leading to processible films that are effectively cross-linked hydrogels. The cross-linking process was carried out during film formation. This membrane can be used as a versatile electrolyte for the AMABs for 50% or higher relative humidity (RH). This membrane was used in several different kinds of metal-air batteries. High conductivity (exceeding 100 mS/cm) and high power and current density were experimentally observed in multiple different kinds of metal-air batteries and related devices.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (43) , 2206
Characterization of Versatile Electrolyte for Alkaline Electrochemical Systems
Alkaline metal-air batteries (AMABs) are of interest due to the potential for high energy density, which typically exceeds that of Li-ion batteries. In open systems such as metal-air batteries, however, performance must be assessed in terms of maximizing power or current density rather than the usual energy density metric. Cost and system performance are most strongly affected by these parameters because of their strong impact on cell count needed to achieve a given total power for an application. One of the key challenges of getting high-performance AMABs is to make a low-cost, durable membrane with high conductivity. This work describes the characterization of a KOH-loaded ion-conducting membrane with excellent conductivity and chemical stability for hydroxide ion conduction, which we refer to a ‘cross-linked, loaded alkaline membrane’ (CLAM). This CLAM membrane was developed in our lab from conserved polymer backbones modified with cationic moieties and cross-linking agents, leading to processible films that are effectively cross-linked hydrogels. The cross-linking process was carried out during film formation. This membrane can be used as a versatile electrolyte for the AMABs for 50% or higher relative humidity (RH). This membrane was used in several different kinds of metal-air batteries. High conductivity (exceeding 100 mS/cm) and high power and current density were experimentally observed in multiple different kinds of metal-air batteries and related devices.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (52) , 2526
Sensing High Concentration Amino Acid Electrolytes
High-concentration amine-containing solutions are emerging media for CO₂ absorption and regeneration through thermal or pH-swing mechanisms. In the latter, electrodialysis is used to effect the pH-swing in a dynamic system. We are exploring a system that uses an amino acid (AA) capture agent. However, the effects caused by their integration into bipolar membrane electrodialysis (BPM-ED) cell is limited by the lack of mechanistic understanding of AA uptake, crossover and the speciation shifts that occur across large pH gradients. In addition, there is little detailed understanding of the effects of uptake of such species on membrane properties. Indeed, our recent BPM-ED analyses indicate that neutral and weakly charged species can migrate through ion-exchange membranes, leading to parasitic ion transport, inevitable electro-osmosis drag, increased ohmic losses, and accelerated performance degradation under conditions of steep pH gradients with increased complexity of multivalent ion co-existence.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (52) , 2526
Sensing High Concentration Amino Acid Electrolytes
High-concentration amine-containing solutions are emerging media for CO₂ absorption and regeneration through thermal or pH-swing mechanisms. In the latter, electrodialysis is used to effect the pH-swing in a dynamic system. We are exploring a system that uses an amino acid (AA) capture agent. However, the effects caused by their integration into bipolar membrane electrodialysis (BPM-ED) cell is limited by the lack of mechanistic understanding of AA uptake, crossover and the speciation shifts that occur across large pH gradients. In addition, there is little detailed understanding of the effects of uptake of such species on membrane properties. Indeed, our recent BPM-ED analyses indicate that neutral and weakly charged species can migrate through ion-exchange membranes, leading to parasitic ion transport, inevitable electro-osmosis drag, increased ohmic losses, and accelerated performance degradation under conditions of steep pH gradients with increased complexity of multivalent ion co-existence.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (50) , 2463
(Keynote) High Efficiency Electrochemical Systems Achieved Using Oxygen Reduction to Peroxide on Organometallic Catalysts
Serendipity struck our laboratory one day: a student attempting to make an air electrode for a metal air battery did some preliminary work using a gold electrode. He found the voltammetry that corresponds to a reversible 2-electron process, oxygen to peroxide. Over time, we were able to identify the source of the reaction, arising from some ‘dirt’—actually a possible ligand--from a student who had previously used the electrode. We were able to reproduce the excellent performance using this and similar ligands. The air electrode cycles with 95% efficiency and 40 mA/cm2 in a symmetric cell. The student went on to form a company, Peroxygen Systems Inc., now Phase 2 Chemicals, for on-site peroxide production.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (50) , 2463
(Keynote) High Efficiency Electrochemical Systems Achieved Using Oxygen Reduction to Peroxide on Organometallic Catalysts
Serendipity struck our laboratory one day: a student attempting to make an air electrode for a metal air battery did some preliminary work using a gold electrode. He found the voltammetry that corresponds to a reversible 2-electron process, oxygen to peroxide. Over time, we were able to identify the source of the reaction, arising from some ‘dirt’—actually a possible ligand--from a student who had previously used the electrode. We were able to reproduce the excellent performance using this and similar ligands. The air electrode cycles with 95% efficiency and 40 mA/cm2 in a symmetric cell. The student went on to form a company, Peroxygen Systems Inc., now Phase 2 Chemicals, for on-site peroxide production.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (3) , 503
Evaluation of Anode Designs for Sodium Metal Hybrid Redox Flow Batteries
Compared to traditional closed-format batteries (e.g., Li-ion), redox flow batteries (RFBs) are distinguished by their decoupled power and energy which enables flexible design, modularity, and scalability. Among emerging RFB configurations, hybrid RFBs employ a solid-state material as one of the redox-active components while maintaining a liquid-phase electrolyte on the opposing side. This architecture offers the potential for higher energy densities and improved chemical control by leveraging the stability and capacity of solid electrodes in combination with the tunability of flowable catholytes or anolytes. In this work, we investigate a hybrid RFB configuration utilizing a solid sodium metal anode paired with a liquid-phase sodium thiophosphate catholyte and a beta-alumina solid electrolyte (BASE) membrane.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (3) , 503
Evaluation of Anode Designs for Sodium Metal Hybrid Redox Flow Batteries
Compared to traditional closed-format batteries (e.g., Li-ion), redox flow batteries (RFBs) are distinguished by their decoupled power and energy which enables flexible design, modularity, and scalability. Among emerging RFB configurations, hybrid RFBs employ a solid-state material as one of the redox-active components while maintaining a liquid-phase electrolyte on the opposing side. This architecture offers the potential for higher energy densities and improved chemical control by leveraging the stability and capacity of solid electrodes in combination with the tunability of flowable catholytes or anolytes. In this work, we investigate a hybrid RFB configuration utilizing a solid sodium metal anode paired with a liquid-phase sodium thiophosphate catholyte and a beta-alumina solid electrolyte (BASE) membrane.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (1) , 27
(Invited) Metal-Air Batteries: Step-By-Step to High Performance in Systems
By using an air electrode, metal-air batteries achieve impressive energy density based on the materials used. However, these ‘open’ systems typically require a ‘balance of plant’ that significantly impacts the total system energy density that is achieved in practice. For any open system, the power density or current density must be maximized to allow the energy conversion unit (typically a stack) to minimize the parts cost associated with increments in the total number of cells required for a given power output.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (1) , 27
(Invited) Metal-Air Batteries: Step-By-Step to High Performance in Systems
By using an air electrode, metal-air batteries achieve impressive energy density based on the materials used. However, these ‘open’ systems typically require a ‘balance of plant’ that significantly impacts the total system energy density that is achieved in practice. For any open system, the power density or current density must be maximized to allow the energy conversion unit (typically a stack) to minimize the parts cost associated with increments in the total number of cells required for a given power output.
- Open Access
- 1 March 2026
- Published by The Electrochemical Society in ECS Advances
- Vol. 5 (1) , 010504
Drastically Improving Aluminum-Air Battery Power Output via Aluminum Film Tuning
Major improvements in the performance of aluminum-air batteries, based on improvement of the aluminum electrode polarization and limiting side reactions, are demonstrated. At high rates of discharge, cell performance is largely dictated by ohmic losses at the anode associated with the aluminum product layer. Turnover of this secondary passivation layer entails conversion of insoluble aluminum hydroxide to soluble aluminate ions. In cells employing the same air electrode and a polymer-based electrolyte, aluminum electrode behavior is systematically investigated as a function of hydroxide concentration, temperature, and electrolyte flow rate to identify optimum conditions and start-up protocols for battery discharge. Stannate addition and plating was explored as a path to inhibit Al corrosion and limit hydrogen evolution as a side reaction. The transient behavior of cells containing stannate in the electrolyte was studied to identify start-up conditions. Overall, this optimization enables a peak power density of 710 mW cm −2 in polarization experiments. Long-term constant current holds of the battery are also shown.
- 1 March 2026
- Published by The Electrochemical Society in ECS Advances
- Vol. 5 (1) , 010504
Open AccessDrastically Improving Aluminum-Air Battery Power Output via Aluminum Film Tuning
Major improvements in the performance of aluminum-air batteries, based on improvement of the aluminum electrode polarization and limiting side reactions, are demonstrated. At high rates of discharge, cell performance is largely dictated by ohmic losses at the anode associated with the aluminum product layer. Turnover of this secondary passivation layer entails conversion of insoluble aluminum hydroxide to soluble aluminate ions. In cells employing the same air electrode and a polymer-based electrolyte, aluminum electrode behavior is systematically investigated as a function of hydroxide concentration, temperature, and electrolyte flow rate to identify optimum conditions and start-up protocols for battery discharge. Stannate addition and plating was explored as a path to inhibit Al corrosion and limit hydrogen evolution as a side reaction. The transient behavior of cells containing stannate in the electrolyte was studied to identify start-up conditions. Overall, this optimization enables a peak power density of 710 mW cm −2 in polarization experiments. Long-term constant current holds of the battery are also shown.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (53) , 2530
Polyol Synthesis of Hausmannite Mn 3 O 4 Nanocatalysts - Application to Oxygen Reduction Reaction
In recent years, many researchers have focused on developing platinum-free catalysts for the oxygen reduction reaction (ORR) [1] due to the high cost and limited availability of platinum. Transition metal oxides present a promising alternative to this precious metal and are being explored for their potential in ORR catalysis 2], particularly in alkaline electrolytes. These oxides can serve as substitutes for platinum-based catalysts, especially in applications in metal-air batteries, including aluminum-air batteries. Moreover, catalysts at the nanometer scale demonstrate enhanced catalytic activity owing to their high surface area. Research indicates that both the size and shape of these nanocatalysts significantly influence their catalytic performance. In this work, we present the synthesis conditions and characterization of manganese oxide nanoparticles (Mn3O4, also known as hausmannite) with various sizes and morphologies.[3][4] these nanocatalysts were subsequently tested for electrochemical activity at room temperature and atmospheric pressure in an O2-saturated 0.1 M KOH solution. We demonstrate that the size and shape of these nanoparticles influence their catalytic activity towards ORR. References [1] Chandran, P., Ghosh, A. & Ramaprabhu, S. High-performance Platinum-free oxygen reduction reaction and hydrogen oxidation reaction catalyst in polymer electrolyte membrane fuel cell. Sci Rep 8, 3591 (2018) [2]Goswami, C., Hazarika, K. K. & Bharali, P. Transition metal oxide nanocatalysts for oxygen reduction reaction. Mater. Sci. Energy Technol. 1, 117–128 (2018). [3]T. Rhadfi, J.-Y. Piquemal, L. Sicard, F. Herbst, E. Briot, M. Benedetti, A. Atlamsani, Polyol-made Mn3O4 nanocrystals as efficient Fenton-like catalysts, Appl. Catal. A 386 (1) (2010) 132–139. [4] Rhadfi, T.; Sicard, L.; Testard, F.; Taché, O.; Atlamsani, A.; Anxolabéhère-Mallart, E.; Le Du, Y.; Binet, L.; Piquemal, J.-Y. J. Phys. Chem. C 2012, 116, 5516
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (53) , 2530
Polyol Synthesis of Hausmannite Mn 3 O 4 Nanocatalysts - Application to Oxygen Reduction Reaction
In recent years, many researchers have focused on developing platinum-free catalysts for the oxygen reduction reaction (ORR) [1] due to the high cost and limited availability of platinum. Transition metal oxides present a promising alternative to this precious metal and are being explored for their potential in ORR catalysis 2], particularly in alkaline electrolytes. These oxides can serve as substitutes for platinum-based catalysts, especially in applications in metal-air batteries, including aluminum-air batteries. Moreover, catalysts at the nanometer scale demonstrate enhanced catalytic activity owing to their high surface area. Research indicates that both the size and shape of these nanocatalysts significantly influence their catalytic performance. In this work, we present the synthesis conditions and characterization of manganese oxide nanoparticles (Mn3O4, also known as hausmannite) with various sizes and morphologies.[3][4] these nanocatalysts were subsequently tested for electrochemical activity at room temperature and atmospheric pressure in an O2-saturated 0.1 M KOH solution. We demonstrate that the size and shape of these nanoparticles influence their catalytic activity towards ORR. References [1] Chandran, P., Ghosh, A. & Ramaprabhu, S. High-performance Platinum-free oxygen reduction reaction and hydrogen oxidation reaction catalyst in polymer electrolyte membrane fuel cell. Sci Rep 8, 3591 (2018) [2]Goswami, C., Hazarika, K. K. & Bharali, P. Transition metal oxide nanocatalysts for oxygen reduction reaction. Mater. Sci. Energy Technol. 1, 117–128 (2018). [3]T. Rhadfi, J.-Y. Piquemal, L. Sicard, F. Herbst, E. Briot, M. Benedetti, A. Atlamsani, Polyol-made Mn3O4 nanocrystals as efficient Fenton-like catalysts, Appl. Catal. A 386 (1) (2010) 132–139. [4] Rhadfi, T.; Sicard, L.; Testard, F.; Taché, O.; Atlamsani, A.; Anxolabéhère-Mallart, E.; Le Du, Y.; Binet, L.; Piquemal, J.-Y. J. Phys. Chem. C 2012, 116, 5516