Spark Plasma Sintering Kinetics of Pure α‐Alumina
- 14 March 2011
- journal article
- research article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 94 (9) , 2825-2833
Abstract
The microstructure development of sintered alumina at different stages in the spark plasma sintering process has been investigated. Based on classical kinetics laws and adapted Coble creep models of hot pressing, the densification and grain growth kinetics were analyzed as a function of various parameters such as heating rate, sintering temperature, and dwell duration. It is found that sintering kinetics are greatly influenced by heating rates. The local temperature gradients at interparticle contacts during high heating rate can be from three to 10 times higher than in low heating rate cycles. Plastic yield might lead to instantaneous densification at an early stage of sintering. However, grain‐boundary diffusion probably dominates at low heating rate whereas grain coarsening, in respect of thermal equilibrium establishment, is unavoidable with high heating rate during the initial‐stage sintering at low temperatures. During the final‐stage sintering, fast grain growth mechanisms such as surface diffusion and pore‐controlled grain‐boundary migration may dominate over densification controlled by grain‐boundary sliding or lattice diffusion. The grain size–density trajectory corroborates that low heating rate is much favorable to achieve near full density with fine grain size at low sintering temperatures.Keywords
This publication has 38 references indexed in Scilit:
- Influence of green state processes on the sintering behaviour and the subsequent optical properties of spark plasma sintered aluminaJournal of the European Ceramic Society, 2009
- Direct comparison between hot pressing and electric field-assisted sintering of submicron aluminaActa Materialia, 2009
- Temperature distribution for electrically conductive and non-conductive materials during Field Assisted Sintering (FAST)Journal of the European Ceramic Society, 2009
- Spark plasma sintering of transparent aluminaScripta Materialia, 2007
- Effects of the Homogeneity of Particle Coordination on Solid‐State Sintering of Transparent AluminaJournal of the American Ceramic Society, 2006
- The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering methodJournal of Materials Science, 2006
- Differential Sintering by Improper Selection of Sintering Parameters during Pulse Electric Current SinteringJournal of the American Ceramic Society, 2004
- Processing of High‐Density Submicrometer Al 2 O 3 for New ApplicationsJournal of the American Ceramic Society, 2003
- Spark Plasma Sintering of AluminaJournal of the American Ceramic Society, 2002
- Sintering, consolidation, reaction and crystal growth by the spark plasma system (SPS)Materials Science and Engineering: A, 2000