The Influence of a Corrosive Environment on Fatigue and Mechanical Properties of An Al-Cast Alloy with Higher Fe Content
Open Access
Abstract
Al has very good corrosion resistance and corrosion properties. The corrosion resistance of Al-cast alloys is different because these alloys contain a lot of elements, especially in secondary alloys, which contain more impurity elements, of which Fe is the most common. This study deals with secondary AlSi7Mg0.3 cast alloys, which contain more Fe and are affected by a chloride corrosive environment. This environment was selected based on the application of castings in the automotive industry. The main object was to research the effect of such an environment on basic mechanical properties and fatigue properties. The results show that a higher Fe content does not lead to a significant reduction in the properties of the casting, and the chloride environment is not so harmful. Therefore, it can be stated that the investigated secondary sand-cast experimental materials can replace primary alloys without losing the required corrosion and mechanical properties.Keywords
All Related Versions
Funding Information
- KEGA (004ŽU-4/2023, 12715)
- Project to support young researchers at UNIZA (004ŽU-4/2023, 12715)
This publication has 43 references indexed in Scilit:
- General aspects related to the corrosion of 6xxx series aluminium alloys: Exploring the influence of Mg/Si ratio and CuCorrosion Science, 2013
- Recycling of automotive aluminumTransactions of Nonferrous Metals Society of China, 2010
- X-ray computed tomography vs. metallography for pore sizing and fatigue of cast Al-alloysProcedia Engineering, 2010
- Calculated phase diagrams and the corrosion of die-cast Mg–Al alloysCorrosion Science, 2009
- Effect of silicon content on microstructure and electrochemical behavior of hypoeutectic Al–Si alloysMaterials Letters, 2008
- Effects of eutectic modification and T4 heat treatment on mechanical properties and corrosion resistance of an Al–9wt%Si casting alloyMaterials Chemistry and Physics, 2007
- Effect of iron-containing intermetallic particles on the corrosion behaviour of aluminiumCorrosion Science, 2006
- Designing Aluminium Alloys for a Recycling Friendly WorldMaterials Science Forum, 2006
- Morphology of β-Al5FeSi Phase in Al-Si Cast AlloysMATERIALS TRANSACTIONS, 2006
- Pitting corrosion in cast 7XXX aluminium alloys and fibre reinforced MMCsCorrosion Science, 2004