Various Metallography Techniques for Microstructure Analysis of Ni-Based Superalloys
Open Access
- 1 December 2024
- journal article
- Published by Walter de Gruyter GmbH in System Safety: Human - Technical Facility - Environment
- Vol. 6 (1) , 473-484
Abstract
The Ni-based superalloys are known for the number of phases presented in alloy microstructure. Depending on alloying elements, phases such as austenitic FCC gamma matrix, L 12 gamma prime, DO 22 gamma double prime, BCT delta phase, and MC or M 23 C 6 (or M 6 C) carbides have occurred. With these microstructure components’ variety, the usual optical microscopy analysis is not satisfactory many times. For a better understanding of how single structures affect the lifetime of Ni-based superalloys components (turbine blades or turbine discs) and how they are changing during their operation load is SEM a very powerful tool. Two different types of superalloys were used for experimental evaluation. The first were cast superalloys ZhS6K and IN 738. Both cast superalloys in bar form were subjected to additional heat treatment at 800°C for 10 and 15 hours followed by air-cooling. The influence of gamma prime phase morphology changes on alloy lifetime and Vickers hardness were evaluated by SEM coherent testing grid methods. The second was wrought superalloy IN 718 and Nimonic 80A in bar form to present the various grain size evaluation techniques according to ASTM E112 standards. Various analyses were employed (SEM fractography, BSE observation, EDS mapping, etc.) for microstructure evaluation. The main goal is to show how effective light microscopy and SEM on Ni-based superalloy analysis are when microstructure change evaluation is needed.Keywords
This publication has 11 references indexed in Scilit:
- The influence of high temperature on DV-2 jet engine Ni-based superalloy turbine blade degradationMaterials Today: Proceedings, 2017
- Evaluation of Shape of Graphite Particles in Cast Irons by a Shape FactorMaterials Today: Proceedings, 2016
- Study of Advanced Materials for Aircraft Jet Engines Using Quantitative Metallography2012
- TEM Study of High-Temperature Precipitation of Delta Phase in Inconel 718 AlloyAdvances in Materials Science and Engineering, 2011
- Superalloys2010
- Nickel-Based Superalloys for Advanced Turbine Engines: Chemistry, Microstructure and PropertiesJournal of Propulsion and Power, 2006
- Superalloys2002
- Ni-based superalloys for turbine discsJOM, 1999
- Influence of rhenium on the microstructures and mechanical properties of a mechanically alloyed oxide dispersion-strengthened nickel-base superalloyJournal of Materials Science, 1998
- Some aspects of the precipitation of metastable intermetallic phases in INCONEL 718Metallurgical Transactions A, 1992