Pullout Tests Using Steel Grid Reinforcements with Low‐Quality Backfill
Authors:
- 1 July 1992
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical Engineering
- Vol. 118 (7) , 1047-1062
Abstract
Both laboratory and field pullout tests are conducted using steel grid reinforcements with cohesive‐frictional backfill soils. The laboratory pullout tests are performed using a large‐scale pullout apparatus designed especially for this study. The field pullout tests are performed on the dummy welded‐wire reinforcements embedded in a full‐scale reinforced test wall/embankment system that utilize three different locally available, low‐quality, cohesive‐frictional backfill soils, namely, clayey sand, lateritic soil, and weathered clay, in the three sections along its length. It is observed that the magnitudes of the mobilized field pullout resistances as well as the strains induced in the reinforcing elements are strongly influenced by the response of the wall/embankment system to the subsoil movements and the resulting arching effects due to the presence of the inextensible reinforcements. Meanwhile, the laboratory pullout test results generally seem to provide a conservative approximation of the field pul...Keywords
This publication has 5 references indexed in Scilit:
- Pullout Resistance of Steel Geogrids with Weathered Clay as Backfill MaterialGeotechnical Testing Journal, 1992
- Laboratory pull-out tests using bamboo and polymer geogrids including a case studyGeotextiles and Geomembranes, 1987
- A Laboratory Investigation of Grid Reinforcements in ClayGeotechnical Testing Journal, 1983
- Nonlinear Analysis of Stress and Strain in SoilsJournal of the Soil Mechanics and Foundations Division, 1970
- Elasto‐plastic solutions of engineering problems ‘initial stress’, finite element approachInternational Journal for Numerical Methods in Engineering, 1969