Influence of Pulse Number on Nugget Formation and Joint Performance in Resistance Spot-Welded 2 GPa Press-Hardened Steel
Open Access
Abstract
The resistance spot welding (RSW) of 2 GPa press-hardened steels, which have been widely used in industrial applications in recent years, poses significant challenges due to brittleness caused by the fully martensitic microstructure, subcritical heat-affected zone softening, and interfacial cracking influenced by the coating. The effect of the number of pulses during welding on nugget formation and fracture behavior remains a critical issue. In this study, microstructural characterizations using optical microscopy and SEM, microhardness testing, tensile-shear tests, and fractography analyses were conducted across different pulse conditions (insufficient, moderate, optimal, and excessive heat input). The obtained results demonstrate that the pulse number is a decisive parameter in nugget formation and joint behavior due to its governing effect on heat input and thermal history. While increasing heat input promotes nugget development, excessive pulsing induces localized degradation, severe indentation, and centerline flaws. Under optimal pulsing conditions (Pulse 7), uniform fusion, refined martensitic transformation, an FZ hardness of approximately 580–600 HV, and a maximum shear strength of approximately 790 MPa were achieved with complete button pull-out failure. In contrast, under low pulse conditions, the narrow fusion zone resulted in hardness approaching 700 HV and brittle interfacial fracture along the faying interface driven by the fully hardened martensitic matrix and micro-shrinkage voids. These findings establish clear processing guidelines for pulse modulation to enhance weld integrity and joint reliability in 2 GPa press-hardened steels.Keywords
This publication has 35 references indexed in Scilit:
- Joining of TiAl intermetallic Compound/CoCrFeMnNi high-entropy alloy dissimilar metals by vacuum brazing process: Microstructure, mechanical properties and processing parametersIntermetallics, 2026
- Resistance spot welding of DH1200 using short pulses and high currents: Effects on nugget size, microstructure, hardness, liquid metal embrittlement, and tensile shear strengthInternational Journal of Lightweight Materials and Manufacture, 2026
- Quality monitoring for a resistance spot weld process of galvanized dual-phase steel based on the electrode displacementWelding in the World, 2024
- Optimizing post-weld performance of press-hardened steel resistance spot welds by controlling fusion zone porosityWelding in the World, 2022
- The Role of HAZ Softening on Cross-Tension Mechanical Performance of Martensitic Advanced High Strength Steel Resistance Spot WeldsMetallurgical and Materials Transactions A, 2021
- Joint formation mechanism and performance of resistance rivet welding (RRW) for aluminum alloy and press hardened steelJournal of Materials Processing Technology, 2020
- Microstructural characterization of a double pulse resistance spot welded 1200 MPa TBF steelWelding in the World, 2019
- Characterization of resistance spot welded transformation induced plasticity (TRIP) steels with different silicon and carbon contentsJournal of Manufacturing Processes, 2018
- Introduction to welding and joining of advanced high-strength steels (AHSS)2015
- Resistance Spot Weldability of High Strength Steel Sheets for Automobiles and the Quality Assurance of JointsWelding in the World, 2007