Primary and secondary gas penetration during gas‐assisted injection molding. Part II: Simulation and experiment
Authors:
- 1 May 2004
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 44 (5) , 992-1002
Abstract
Simulation and experimental studies have been carried out on the transient gas‐liquid interface development and gas penetration behavior during the cavity filling and gas packing stage in the gas‐assisted injection molding of a spiral tube cavity. The evolution of the gas/melt interface and the distribution of the residual wall thickness of skin melt along with the advancement of gas/melt front were investigated. Numerical simulations were implemented on a fixed mesh covering the entire cavity. The residual thickness of a polymer layer and the length of gas penetration in the moldings were calculated using both the simulation and model developed in Part I of this study and commercial software (C‐Mold). Extensive molding experiments were performed on polystyrene at different processing conditions. The obtained results on the gas bubble dynamics and penetration behaviors were compared with those predicted by the present simulation and C‐Mold, indicating the good predictive capability of the proposed model. Polym. Eng. Sci. 44:992–1002, 2004. © 2004 Society of Plastics Engineers.Keywords
This publication has 7 references indexed in Scilit:
- Primary and secondary gas penetration during gas‐assisted injection molding. Part I: Formulation and modelingPolymer Engineering & Science, 2004
- Void shape in gas-channel ribs in gas-assisted injection-molded platesAdvances in Polymer Technology, 1999
- Investigation of gas‐assisted injection molding. Part III: Effect of gas channel design on part bending strengthPolymer Engineering & Science, 1998
- Development of moldability diagrams for gas‐assisted injection moldingAdvances in Polymer Technology, 1995
- Unstable Gas Penetrations in Symmetrical Rib Channels During Gas-assisted Injection MoldingInternational Polymer Processing, 1995
- Experimental Study on Gas Penetration Characteristics in a Spiral Tube during Gas-Assisted Injection MoldingIndustrial & Engineering Chemistry Research, 1995
- Relation between viscoelasticity and shear-thinning behaviour in liquidsRheologica Acta, 1979