Study on Characteristics and Control of Aerodynamic Noise of a High-Speed Centrifugal Air Compressor for Vehicle Fuel Cells
Open Access
- 4 October 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (19) , 9962
Abstract
As the main noise source in the hydrogen fuel cell system, the noise level of the centrifugal air compressor greatly affects the comfort of the hydrogen fuel cell vehicle. For reducing the noise level of centrifugal air compressors, the noise characteristics and control of a high-speed two-stage compressor prototype are studied in this paper. Firstly, the near-field noise measurement, along with the independent component analysis, is carried out to identify the noise source of the developed compressor. Results showed that the “buzz-saw” noise at the rotating fundamental frequency and its low order harmonic frequency in the aerodynamic noise is prominent in the noise spectrum. Thus, the aerodynamic noise characteristics are predicted and analyzed using the CFD–BEM coupling aeroacoustic calculation model. Based on the analysis results, a noise control method coupling the structure optimization and perforated muffler is proposed. The results show that the sound pressure level of the air compressor at 1 m away from the surface is reduced by 4.1 dBA after the structural optimization. A perforated muffler applied in the pipe system of the air compressor can accomplish a reduction of 5.8 dBA in the sound pressure level of the air compressor by impeding the noise transmission on the path. With the coupled noise control methods above, the sound pressure level of the air compressor is reduced from 78.8 dBA to 68.9 dBA under the rated condition.Keywords
Funding Information
- the national key Research and Development Program of China (2019YFB1504604)
This publication has 12 references indexed in Scilit:
- Effects analysis on aerodynamic noise reduction of centrifugal compressor used for gasoline engineApplied Acoustics, 2021
- Noise control of a twin-screw refrigeration compressorInternational Journal of Refrigeration, 2021
- Evaluation of modelling parameters for computing flow-induced noise in a small high-speed centrifugal compressorAerospace Science and Technology, 2020
- Acoustic signature of flow instabilities in radial compressorsJournal of Sound and Vibration, 2018
- Numerical Investigation of an Asymmetric Double Suction Centrifugal Compressor With Different Backswept Angle Matching for a Wide Operating Range2017
- Assessment of the 3D Flow in a Centrifugal compressor using Steady-State and Unsteady Flow SolversSAE International Journal of Advances and Current Practices in Mobility, 2014
- Sound generation in centrifugal compressorsJournal of Sound and Vibration, 2008
- “Buzz-saw” noise: A comparison of measurement with predictionJournal of Sound and Vibration, 2006
- Analysis and optimization of aerodynamic noise in a centrifugal compressorJournal of Sound and Vibration, 2006
- Metamodel of Optimal Prognosis - An automatic approach for variable reduction and optimal meta-model selection