Implementation of an interleaved pulse‐width modulation converter for renewable energy conversion
Authors:
- 12 October 2011
- journal article
- research article
- Published by Wiley in International Journal of Circuit Theory and Applications
- Vol. 41 (2) , 168-185
Abstract
SUMMARY: This paper presents an interleaved soft switching converter to achieve the features of zero voltage switching (ZVS) turn‐on for power switches, zero current switching turn‐off for rectifier diodes at full load, less transformer secondary winding with full‐wave diode rectifier topology, and balance primary currents with series connection of the transformer secondary windings. Two circuit modules are adopted in the proposed circuit, and they are operated with an interleaved pulse‐width modulation. Thus, ripple currents at the input and output sides are reduced. In each module, two ZVS converters using the same switches are operated with interleaved half switching cycle. The secondary windings of transformers are connected in series in order to ensure that the primary side currents are balanced. The full‐wave diode rectifier topology is used on the output side such that the voltage stress of rectifier diodes equals output voltage, rather than being two times the output voltage as in a conventional center‐tapped rectifier topology. Laboratory experiments with a 1000‐W prototype are provided to describe the effectiveness of the proposed converter. Copyright © 2011 John Wiley & Sons, Ltd.Keywords
This publication has 25 references indexed in Scilit:
- A Three-Level Resonant Single-Stage Power Factor Correction Converter: Analysis, Design, and ImplementationIEEE Transactions on Industrial Electronics, 2009
- A Novel High-Frequency Transformer-Linked Soft-Switching Half-Bridge DC–DC Converter With Constant-Frequency Asymmetrical PWM SchemeIEEE Transactions on Industrial Electronics, 2009
- Analysis, Design, and Implementation of a Parallel ZVS ConverterIEEE Transactions on Industrial Electronics, 2008
- Analysis and Derivations for a Family ZVS Converter Based on a New Active Clamp ZVS CellIEEE Transactions on Industrial Electronics, 2008
- A CLL Resonant Asymmetrical Pulsewidth-Modulated Converter With Improved EfficiencyIEEE Transactions on Industrial Electronics, 2008
- Analysis of the ZVS two‐switch forward converter with synchronous current doubler rectifierInternational Journal of Circuit Theory and Applications, 2007
- Analysis of Parallel-Connected Asymmetrical Soft-Switching ConverterIEEE Industrial Electronics Magazine, 2007
- ZVT interleaved boost converters for high-efficiency, high step-up DC–DC conversionIET Electric Power Applications, 2007
- High-efficiency DC/DC converter with high voltage gainIEE Proceedings - Electric Power Applications, 2005
- Analysis, simulation and verification of a bipolar current source power resonant inverterInternational Journal of Circuit Theory and Applications, 2004